MOTIC AE31 Series Inverted Microscope with 4 x Objectives Lab

Motic AE21 Series Trinocular Inverted Microscope with 3x Objectives This was removed from a working  (more)lab where it was surplus to requirements. The unit has been tested and is in good working order. It is in very good cosmetic condition with minor marks It is fitted with the following; 1x N.A. 0.30 condenser (WD 72mm) with halogen illumination 6v/30w. 1x Centerable PH slider supplied with phase ring PH 1 2 x Eyepieces - W10x/20 3 x Objectives: 1x Motic E Plan LWD PH 20x/0.40 ∞/1.1 WD 5.51x Motic E Plan PH 10x/0.25 ∞/1.1 WD 6.31x Motic E Plan 4x/0.10 ∞/1.1 WD 14.2

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement. The microscope has been tested using one of our slides and it appears to work well with all fitted objectives. The system consists of: 1 x Olympus BX40F-3 Microscope body.1 x Olympus U-RLA Reflected Light Vertical Illuminator.1 x Olympus U-SVRS Mechanical Stage.1 x Olympus U-AC Brightfield Condensor.1 x Olympus U-TRU Side Camera Port.1 x Olympus U-TR30 Trinocular Head.1 x Olympus U-TVO.5XC-2 Camera Adapter.1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.1 x Olympus U-PMTVC Camera Adapter.1 x Olympus U-LS30-4 Lamp (new bulb fitted). 1 x Vantage Camera.1 x Q Imaging QICam UV Fast Camera. Both cameras are untested. Microscope has the following 4 objectives fitted: 1 x Olympus Japan 103250 IC10MSPlan100.30∞/- f = 180 1 x Olympus Japan T4-100580 IC20MSPlan200,46∞/0 f=180 1 x Olympus Japan 100DPlan Apo100UV1.30 oil160/0.17 1 x Olympus Japan IC150MDPlan 1500.95∞/0 f=180 It is also fitted with a pair of Olympus WH10X/22 eyepieces.

Binocular microscope bScope BS.1152-PLHi, eyepieces HWF 10x / 20 mm quintuple nosepiece with the pha (more)se of plan PLPHi 10/20 / S40 / S100x infinite oil corrected objectives, stage 131 x 152/197 mm with mechanical built-in 77 x 36 stage X-And without rack mm Condenser phase contrast Zernike with iris diaphragm and filter holder.3 W NeoLED ™ Kohler illumination and integrated power supply. Supplied without rechargeable batteries. Eyepieces HWF 10x / 20 mm Head binocular, type Siedentopf, tube inclined 30 °. Interpupillary distance 48-75 mm diopter Adjustment on the left pipe Nosepiece revolving quintuple reversed in ball bearings Plan of phase PLPHi 10x, 20x, S40x, oil immersion S100x infinity corrected IOS objective for phase contrast All the optics are coated with antifungal treatment and anti-reflective for maximum lightweight performance Settings coaxial coarse and fine with 180 graduations. Precision 1.1 µm, 0.2 mm per rotation. Total distance of approximately 18 mm Tojuste friction Stage without a frame of 131 x 152/197 mm with mechanical mechanism 77 x 36 mm scenario without rack Condenser Zernike height adjustable N. To 1.25 with diaphragm & filter iris Kohler Illumination 3 W NeoLED ™. Internal power supply 100-240 V (CE) Supplied with power cable, dust cover, immersion oil 5 ml in case of polystyrene foam and without AA rechargeable batteries

Motic Moticam X5 Plus Microscope Camera Highest Live Display Mode 1920x1080 Pixels Capture Resolutio (more)n 4MP Maximum Frames per Second (FPS) 30 FPS Features - 4MP (2560x1440 pixels) capture resolution - 1280x720, 1920x1080 pixels (Full HD) live display - Data transfer: Wi-Fi (2.4 & 5 GHz), Ethernet (RJ-45) - 30 Frames per second (depending on Wi-Fi strength) - CMOS sensor type (1/3-inch); C-mount lens mount The Motic Moticam X5 Plus is a 4 MP digital microscope camera with Wi-Fi and ethernet data transfer. The Moticam X5 Plus turns your microscope into a Wi-Fi station, allowing you to share your images with up to six devices at the same time by logging into MotiConnect from your tablet or smartphone. The Moticam X5 Plus follows our All-In-One-Box methodology. This means that with the included focusable lenses, eyepiece adapters, and glass calibration slide, you can convert almost any conventional microscope into a digital microscope. View, edit, capture and store your images in the blink of an eye, view live images on multiple wireless devices, and share your work with anyone in just a few clicks. The MotiConnect App makes data sharing possible in a collaborative environment, encouraging teamwork and collective learning experiences. Connect your Moticam to your computer if you wish to work with our well-known software Motic Images Plus 3.1, which comes included in the package as a download Click Here to View Product Video INCLUDED: The Motic Moticam X5 Plus Microscope Camera includes: - CS ring adapter - 12mm Focusable lens - Eyepiece adapters - Motic 4-dot calibration slide - Motic Images Plus for Windows/OSX/Linux (download) - MotiConnect (free app download) - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hoefer™ miniVE electrophoresis unit. Vertical unit with gel size 10.0 cm wide × 8 to 10.5 cm long. T (more)ank volume 1.7 L. with one module and 1.2 L. with two modules installed. Maximum operating temperature 75ºC. For use only with dilute aqueous solutions between pH 2 and pH 12. Not compatible with organic solvents or concentrated alcohols, acids, bases and oxidizing agents. Dimensions (WxDxH) 192 × 172 × 188 mm. 1.2kg. Includes 2 gel modules, safety cap and reservoir The Hoefer miniVE electrophoresis unit is a compact and efficient device that allows you to separate DNA, RNA and protein molecules in agarose or polyacrylamide gels. With capacity for up to 2 gels at a time, this system is ideal for laboratories with limited space that require accurate and reproducible results in their molecular biology analyses. Furthermore, its intuitive and easy-to-use design makes it an indispensable tool for researchers and technicians in the field of genetics and biotechnology.

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Labconco FreeZone 8L -50C Benchtop Freeze Dryer with stainless steel coil and collector Features - P (more)atented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 8 Liter Benchtop Freeze Dryers are designed forlyophilizing moderate sample loads. The compact design is ideal for labs withlimited floor space. The upright stainless steel collector coil holds 8 litersof ice before defrosting. A single 3/4 hp HCFC/CFC-free refrigeration systemcools the collector to -50C (-58F), suitable for aqueous samples.Lyo-Works™ OS provides a real time display of collector temperature, vacuumlevel and optional End-Zone™ end point detection system, shown on a 5"full color, capacitive touch screen. Models with PTFE-coated collectors thatcan withstand corrosive compounds are available.Features Upright stainless steel collector coil holds 8Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Lyo-Works OS provides a real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700801000 FreeZone 8L -50C Benchtop Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty