Leica DMIL Inverted Microscope w/ 4 x Objectives Phaco, 160/- Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hund Wetzlar Wilovert Inverted Microscope w/ 3 x Objectives This was removed from a university lab w (more)here it was surplus to requirements. The unit powers on and is in full working order. It is in good cosmetic condition with minor marks from use. It is supplied with;3 x WF 10X Eyepieces.2 x Covers.1 x Eyepiece (no information).1 x 10 x P Eyepiece.1 x Spare Fuse Part No. (670.55327).1 x Tool Part No. (019.0120.0).1 x Hund Wetzlar Objective SPL 20/0.25 Ph-p.

Infinity 1 Microscope Camera With Software Lab This item was removed from a university where it was  (more)surplus to requirement. It is brand new and sealed in its original packaging. Included software: Infinity Analyze - Complete Image AnalysisInfinity Capture - Basic capture and video

GeneSys 10S UV-VIS Spectrophotometer This item was removed from a university where it was surplus to (more) requirement. This item is in fair cosmetic condition. The unit powers on, with all buttons and the screen functioning properly with no damage. Model: G10S UV-Vis

GeoTech G100 Co2 Analyser with Hygroclip 2 Advanced Humidity Sensor Lab This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Included are the following: 1 x GeoTech G100 Co2 AnalyserS/N - IN171951 x HygroClip 2 Advanced seriesS/N - 20684187 1 x GeoTech Cary Case 1 x Sample Tube Kit

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Scilogex iFlow Motorized LCD Digital Bottle Top Dispenser, 0.1-99.9ml, 110-240V Volume Range 0.1 to (more) 99.9ml - 100ul resolution Max. piston capacity 10ml Volume increments 0.1ml Features - Two dispensing modes. Single volume dispensing to 99.9ml or multi-dispensing (from 0.2ml x 50 times, to 5ml x 2 times) - High quality stepper motor provides smooth and accurate dispensing - Aspirate and dispense speed is adjustable - Recirculation feature minimizes waste when priming - TFT display module for simple volume selection and control - Comes with corded remote control to start and stop dispensing - Comes with adjustable titrating nozzle with flexible length - 45mm plus included adapters (GL25, GL28, GL32, GL38 & S40mm) to fit all common lab bottles Scilogex iFlow Electronic Motorized Digital Bottletop Dispensers are ideal for safe, accurate and precise dispensing of bases, saline solutions, acids and some organic solvents. (Please check our chemical compatibility chart below for compatible liquids and permissible concentrations). Dispense from 0.01ml to 99.99ml (10ml piston capacity, so the piston will refill 10 times for the 99.99ml maximum volume) simply controlled by the TFT touch screen display module. Choose from either the fixed position dispense nozzle or the included adjustable dispensing nozzle with flexible tube. A recirculation feature minimizes waste when priming. A corded remote control is also included. The iFlow is totally portable and can be recharged in 4 hours providing approximately 5 hours usage. Alternatively the 110-240V multi-voltage power adapter can be used for uninterrupted use. INCLUDED: The Scilogex iFlow Motorized LCD Digital Bottle Top Dispenser, 0.1-99.9ml, 110-240V includes: - GL25, GL28, GL32, GL38 & S40mm Adapters - Adjustable Dispersing Nozzle - Corded Remote Control - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 TT.18S Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit m (more)ost laboratory liquid metering and dosing needs. The FEM 1.02 TT.18S version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: PVDF head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue.INCLUDED: The KNF IP65 FEM 1.02 TT.18S Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty