Duplex Light Guide 10mm 2x 60cm Cold Light Source Microscope Mikroskop

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Protein Technologies Prelude Peptide Synthesis System is being sold on behalf of a client. It i (more)s surplus to requirements. The unit is in full working order and the software is included. The PC is built in, and controlled by the included monitor & keyboard.The plastic section of the ducting will be retained by the Lab, the metal section coming directly from the Prelude is included. It is in very good cosmetic condition with only minor marks from use. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.s

Binocular microscope bScope BS.1152-PLHi, eyepieces HWF 10x / 20 mm quintuple nosepiece with the pha (more)se of plan PLPHi 10/20 / S40 / S100x infinite oil corrected objectives, stage 131 x 152/197 mm with mechanical built-in 77 x 36 stage X-And without rack mm Condenser phase contrast Zernike with iris diaphragm and filter holder.3 W NeoLED ™ Kohler illumination and integrated power supply. Supplied without rechargeable batteries. Eyepieces HWF 10x / 20 mm Head binocular, type Siedentopf, tube inclined 30 °. Interpupillary distance 48-75 mm diopter Adjustment on the left pipe Nosepiece revolving quintuple reversed in ball bearings Plan of phase PLPHi 10x, 20x, S40x, oil immersion S100x infinity corrected IOS objective for phase contrast All the optics are coated with antifungal treatment and anti-reflective for maximum lightweight performance Settings coaxial coarse and fine with 180 graduations. Precision 1.1 µm, 0.2 mm per rotation. Total distance of approximately 18 mm Tojuste friction Stage without a frame of 131 x 152/197 mm with mechanical mechanism 77 x 36 mm scenario without rack Condenser Zernike height adjustable N. To 1.25 with diaphragm & filter iris Kohler Illumination 3 W NeoLED ™. Internal power supply 100-240 V (CE) Supplied with power cable, dust cover, immersion oil 5 ml in case of polystyrene foam and without AA rechargeable batteries

Download the datasheet, choose the model with the desired range/resolution and contact us for our be (more)st quote. Defender 6000 advanced IP68/IP69k washable bench scale Versatile, precise and extremely resistant. Suitable for extreme humid environments, the new Defender® 6000 bench scale has been designed to offer an IP69K degree of protection and meet the hygienic demands of the chemical and food industries. For years, operators in the food, chemical and pharmaceutical industries have chosen Defender bench scales from OHAUS for their exceptional reliability, accuracy and versatility. - Resistant to intensive washdowns in processing and packaging environments: IP68/IP69K, - NSF certified and supports HACCP systems with a 316 stainless steel base: Corrosion protection in food and chemical processing and packaging. - Large display and different application modes - Connectivity: GLP/GMP data output with real-time clock Control panel DT61PW, for Defender 6000 Hybrid Easy to use thanks to its five buttons and its large and bright LCD screen. They offer an optional infrared communication kit to connect without opening the housing. The indicator is capable of storing up to 1,000 weighing results which can be transferred to a PC or system for traceability. PW models can run on standard D-cell batteries for up to 1,600 hours. D61XWE control panel, for Defender 6000 in stainless steel. Bar matrix display, cut resistant keyboard with dedicated keys for quick product changes and touchless sensor. They offer several connectivity options, including standard RS232 and integrated USB host. Optional: RS232/RS485/USB, analog output, Wi-Fi/Bluetooth, Ethernet and discrete I/O with relay. XWE models run on standard mains power, and optional external USB power bank support is available (up to 55 hours with 20,000mAh power bank). Models without column, Defender 6000 Front Mount Models without column, only with the DT61PW control panel, are also available for the Defender 6000 Hybrid. APPLICATIONS Weighing: Determine the weight of items in the selected unit of measure. Parts Counting: Count items of uniform weight. Advanced auto-optimization software recalculates the average piece weight as the overall weight increases. Checkweighing/ Checkcounting: Compare the weight of an item against target limits. Compare the count of a package against target limits. Bar matrix or 3-color check light display give clear and bright indication of weight. Percent Weighing: Display the weight of an item as a percentage of a pre-established reference weight. Dynamic Weighing and Display Hold: Take an average of weights for an item over a period of time to account for vibration or other interference. The Display Hold feature manually or automatically holds the last stable weight of an item on the display. Available only in the i-D61XWE models: Filling: Fill a container to a target weight. 3-color bar matrix displays filling status. Connect with Discrete I/O option kit for an auto-filling system. Library and User Management: Up to 300 library items (stores part number, tare weights, APWs, under/over limits, set points or reference weight) can be shared within different weighing modes. Up to 100 user IDs can be stored for secure user access and traceability Resistance and practicality The Defender 6000 scale features a 316 stainless steel platform and frame, and an advanced wet-weather indicator with IP68/IP69K rating and hermetically sealed load cell, as well as a cut-resistant front panel. Plus, NSF Certified and USDA-AMS Approved; supports HACCP systems, for environments related to food safety. The scale can withstand any mishap, from food splashes to chemical splashes, and is sturdy enough to be washed down with a high pressure washer. Resistant to intensive washing typical of processing and packaging environments. Plus: 150% overload protection, password menu protection, menu and key lock, stability indicator, overload/underload indicators, low battery level indicator (i-DT61PW models), auto power off and automatic tare. A dedicated target key allows you to quickly configure over/under weight of packs, speed up line changes and simplify and customize templates for data printing. In the video: How to use the 'checkweighing' mode. In the video: How to use the 'fill' mode.

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf bucket aerosol-tight lid 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling Measuring  (more)Range Max. 40000 J Measuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Includes C 5012 decomposition vessel, suitable for high-halogen and sulfur samples (3%) - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming-to-standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. The catalytic activated, halogen resistant decomposition vessel C 5012 is specifically designed for the combustion of samples that contain halogens and sulfur ( 3 % ). The material of the decomposition vessel (Hastelloy) prevents corrosion caused by samples with high chlorine content. The catalytic activated inner-surface leads to higher recovery rates in case analysis of halogens and/or sulfur is required after the combustion. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 CalWin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. CalWin is sold separately. INCLUDED: The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling includes: - C 5012 Decomposition Vessel, Halogen Resistant - C 200.2 Conversion Kit for C 5012 - C 200.RC Set of Hoses - RC 2 Basic Recirculating Chiller - C 248 Oxygen Filling Station - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Key features: High precision measurements Stability over Time Calibration and Strict Quality Control Versatility of Applications Cylindrical shape Nominal value: 10 kg

The HX7.4P C is a brand new design comprised of the advanced PUE HX7 indicator, made of stainless st (more)eel, and a powder coated 4-load-cell pallet construction. It is intended for weighing of Euro pallets as well as any transport pallets of 800 × 1200 mm dimensions. The scale enables loading the weighing pan using a forklift. The indicator thanks to its distinguishing features such as a colour 7” graphic display, and a diode bar graph which signals the current load mass referred to the scale range or the declared min and max thresholds, significantly simplifies the operation. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.