Beckman TLA120.2 Fixed Angle Rotor Festwinkelotor 10x2 mL S/N 00E623 (357656)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Zeiss Planapo 63x/1.4 Oel Microscope Objective 461841-9901 The unit is in good cosmetic condition bu (more)t has not been tested.

Nikon Ne10 Digital Theodelite This item was removed from a university where it was surplus to requir (more)ement. It is in very good cosmetic condition and includes the original carry case shown in the image. We are unable to test the item at our facility.

Olympus BX40 Microscope Without Stage Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility due to it not including a stage to hold the sample slide. All units included are as follows; 1 x Olympus BX40 MicroscopeModel BX40F4. Serial No. 9F13549 1 x Olympus UPlanFl 10x/0.30.1 x Olympus UPlanFl 100x/1.30 oil /0.17.1 x Olympus UPlanFl 60x/1.25 oil iris /0.17.1 x Olympus WH12.5x/16 Eyepiece.

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement. The microscope has been tested using one of our slides and it appears to work well with all fitted objectives. The system consists of: 1 x Olympus BX40F-3 Microscope body.1 x Olympus U-RLA Reflected Light Vertical Illuminator.1 x Olympus U-SVRS Mechanical Stage.1 x Olympus U-AC Brightfield Condensor.1 x Olympus U-TRU Side Camera Port.1 x Olympus U-TR30 Trinocular Head.1 x Olympus U-TVO.5XC-2 Camera Adapter.1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.1 x Olympus U-PMTVC Camera Adapter.1 x Olympus U-LS30-4 Lamp (new bulb fitted). 1 x Vantage Camera.1 x Q Imaging QICam UV Fast Camera. Both cameras are untested. Microscope has the following 4 objectives fitted: 1 x Olympus Japan 103250 IC10MSPlan100.30∞/- f = 180 1 x Olympus Japan T4-100580 IC20MSPlan200,46∞/0 f=180 1 x Olympus Japan 100DPlan Apo100UV1.30 oil160/0.17 1 x Olympus Japan IC150MDPlan 1500.95∞/0 f=180 It is also fitted with a pair of Olympus WH10X/22 eyepieces.

FISHER SCIENTIFIC FISHERBRAND DIEMOS ABV 175/80°C Drying Oven / Incubator with Forced Convection Dry (more)ing cabinet with motor-fan Capacity: 175 litres Vertical type External dimensions: (L) x (D) x (H): 69 x 71 x 103 cm Zinc-plated steel back Temperature range: 10°C above ambient temperature - up to +80°C 2 perforated stainless steel shelves Double doors (internet door and external door) 230 V 50/60 Hz 1000 W Weight: 70 Kg Tested at 37°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 500 g), wooden box Number of p (more)ieces in the set: 24 Weights 1 g i 2 g – solid masses without adjusting chamber

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).