Scilogex MX-RD-E Analog Tube Rotator Mixer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Sample preparation stirrer Modernize your laboratory with Guardian 5000 Series shakers, designed to  (more)be safe and deliver exceptional safety and superior performance. Numerous cutting-edge Ohaus features: - SafetyHeat system to protect the laboratory: an industry-leading sensing system uses two independent safety controls to continuously monitor the electronics and shut off the heat before it overheats - Powerful and consistent shaking performance: precise stirring from 60 to 1600 rpm is made possible by the design of a powerful, robust motor with magnet and software controlled ramp rate, ensuring safe stirring even for viscous applications. - Easy to read LCD display with everything you need to know: the bright LCD display includes temperature and speed settings, intuitive icons and hot top indicator - Durable and reliable with SmartHousing: smartHousing is resistant to chemicals with an innovative and easy to clean design; the lines allow any liquid spills to drain out of the instrument Available models: Model e-G51HP07C: plate 178x178mm; flow rate 15 litres; ceramic plate; heating up to 500°C. Model e-G51HS07C: plate 178 x 178mm; flow rate 15 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HS10C: plate 254x254mm; flow rate 18 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HSRDM: plate Ø135mm; flow rate 18 litres; aluminum plate; heating up to 380°C and stirring up to 1600rpm. Model e-G51ST07C: plate 178x178mm; flow rate 15 litres; ceramic plate; stirring up to 1600rpm. Applications Boiling water, water/oil bath preparation, sample and solution preparation, dissolution buffers and reagents, sample concentration Display Backlit LCD display for temperature and speed, green lights when unit is heating and agitating, prominent hot light, probe in use icon, single point calibration icon Operation Stirring from 60 to 1600 rpm, ambient temperature range from +5°C to 500°C (ceramic top) or 380°C (aluminum top), power cord (included), the stirring models include a 1.5” (3.8cm) PTFE coated stir bar Construction Probe connection, SmartHousing™ stays cool to the touch and is resistant to chemicals, IP21 rated, polycarbonate front panel, control knobs, On/Off switch to disconnect heater, integrated pole holder, easy-to-use ceramic or aluminum tops to clean Characteristics Hot top light, audible alarm, SafetyHeat™ protection shuts down heater in case of malfunction, temperature calibration function for 3 probes and 3 platen setpoints

Ohaus mini vortex stirrers OHAUS mini vortex mixers are available in four models, for reliable, gent (more)le, and high-speed mixing. Fixed speed, analog, digital and pulse models. Fixed Speed: Economical choice for vigorous, high-speed, one-touch mixing for repeatable applications. Analog control: adjust the speed as you want, you don't need precise repeatable results; speed control knob with graduation marks between 1 and 10. Digital control: adjust the speed easily and precisely, for repeatable results; control via LED display for speed and time, with buttons for adjusting the default values. Pulse vortex: pulse action that reduces heat generation, ensuring effective cell mixing and fractionation; control via LED display for speed and time, with buttons for adjusting the predefined values ​​and button for impulse control. - In tactile mode, mixing is activated by pressing the cupped head, while the continuous mode allows the use of accessories. The sturdy and stable structure ensures that the unit remains in place during use. - Rugged digital and analog vortex mixers allow for effective speed control, from low-rpm starting for gentle shaking to vigorous, high-speed vortex mixing of samples. Applications Resuspension fluids, mixing reagents, buffers and emulsions, ELISA tests, drug extractions, mixing samples Display Digital Models: Independent LED displays with speed and time information that allow the operator to view both settings simultaneously. Analog Models: Marked knobs for variable speed control. Operation Detachable three-wire cable and plug (included) Communication N / A Structure For all models: Accessory platform of about 7 cm with cup head for beakers, flasks, test tubes, etc ... For pulse model: holder for 12 stainless steel microtubes. Construction features Digital Models: Integrated chip control maintains set speed for constant mixing. Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

This listing is for a Benchmark Scientific BV1000 BenchMixer Vortex Mixer. The unit is in full work (more)ing condition and is ready for immidate realese. The Benchmark Scientific BV1000 BenchMixer Vortex Mixer is an essential laboratory instrument designed for both gentle shaking and rapid vortexing of samples, including full 50 mL tubes. With a wide variable speed range of 200 to 3,200 rpm, this versatile vortex mixer adapts to various mixing needs, making it suitable for biochemical, microbiological, and other laboratory applications. The BV1000 features advanced functionality that allows it to operate in touch or continuous mode, enhancing user convenience and flexibility. Key Features: Variable Speed Control: Adjust the mixing speed from 200 to 3,200 rpm to accommodate different sample types and desired mixing intensities, ensuring optimal results. Versatile Mixing Options: The mixer comes equipped with a rubber cup head for mixing single tubes and can be fitted with a 3" flat head (sold separately) for multiple tube mixing or an optional combination head (sold separately) that accommodates up to 60 small tubes or a microplate. Q-Drive Counter-Balance System: This innovative system maximizes vortexing efficiency while minimizing noise and vibration, providing a quieter and more stable operation. Cold Room and Incubator Compatible: Designed for use in a range of environments, including cold rooms or incubators, expanding its versatility in various experimental conditions. Spill-Proof Electronic Controls: The mixer features robust electronic controls that are protected against spills, ensuring reliable performance and ease of maintenance. Suction Feet: Equipped with suction feet to prevent walking during operation, ensuring stability and safety during high-speed vortexing. Specifications: Speed Range: 200 to 3,200 rpm Mixing Capacity: Compatible with standard rubber cup head; can be fitted with 3" flat head or combination head (sold separately) Orbit: 3 mm Operating Temperature: 4 to 65 °C (39 to 149 °F) Electrical Rating: 115V, 60Hz Dimensions: 17 x 13 x 16 cm (H x W x D) / 6.7 x 5 x 6.3 inches Weight: 3.8 kg (8.4 lb)

Compact, universal small shaker suitable for shaking tasks with all small vessels. Two operating mod (more)es: Mode A (safe mode with attachment detection) the maximum speed of 3.000 rpm is only reached with the standard attachment in touch mode. When using other attachments the speed is limited to 1.300 rpm. Mode B (without attachment detection) a speed of 3.000 rpm is possible with all attachments. Orbital shaking movement amplitude 4.5 mm Speed 0 – 3000 rpm Dimensions (lxwxh) 148 x 205 x 63 mm Weight 2.9 kg Excluding shaking attachment

MARSHALL Select MS-RE80A Tube Rotator Mixer, 0-80 RPM Speed Range 10 to 80 RPM Motor Type DC Motor O (more)perating Mode Continuous or Timing Features - Provides easy monitoring of speed and time settings - Made from stainless steel with an oxidation coating for longevity - Available in both plastic and stainless steel to suit various needs - Supports tubes of 1.5ml, 15ml, and 50ml for flexible use - Offers flexibility with continuous or timed modes up to 1199 minutes - Ensures reliable and consistent performance The MARSHALL Select MS-RE80A Tube Rotator Mixer is a highly adaptable and efficient solution for laboratory applications that require precise sample agitation. Offering an adjustable speed range from 0 to 80 RPM, this mixer provides fine-tuned control to meet diverse experimental requirements. The easy-to-read LCD display allows for accurate monitoring of speed settings, ensuring consistent and reliable mixing. Built with durable materials, the tube holder is crafted from stainless steel with an oxidation coating, and the clips come in both plastic and stainless steel options to accommodate tube sizes of 1.5ml, 15ml, and 50ml. The mixer can operate in continuous or timed modes, providing flexibility for various protocols. Equipped with a dependable DC motor and consuming just 40W of power, the MS-RE80A is both energy-efficient and highly effective. Its compact design, along with standard accessories such as a tube holder and stainless steel clips, makes it a valuable addition to any laboratory setup, with external dimensions of 20.1 x 8.7 x 10.2 inches and a gross weight of 3kg. INCLUDED: The MARSHALL Select MS-RE80A Tube Rotator Mixer, 0-80 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

M1 Mass Standard - rectangular weights. Nominal value - 5 kg.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Scilogex MicroPette Pipettor, 0.5-10µl The Scilogex MicroPette Pipettor, 0.5-10µl has a volume rang  (more)of 0.1-2.5µl with an accuracy of 2.50/3.00/12.00±%. INCLUDED: The Scilogex MicroPette Pipettor, 0.5-10µl includes: - Calibration/Opening Tool - Grease - Tip - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty