Retsch SR 200 Rotor Beater Mill

Manufacturer: Millipore Merck Model: Manu-CART Items delivered:- 1x Cap Nut- 2x Spin Collects- 1x En (more)d Fitting

These were removed from a lab where they were surplus to requirements. All are brand new and sealed  (more)but are past their expiry dates.

Bridgeport JB12568 Milling Machine This item was removed from a university laboratory where it was s (more)urplus to requirements. The milling machine is in good used condition with wear. During reassembly of the bed, the gib on the left-to-right motion was damaged; it became tight and jammed in place. However, the main bed itself is undamaged. Please note that one woodruff key is missing. Photo's of the damaged gib are features at the end of the slide. A video showing the machine powered on with bed moving is available on request. Features:- Mitutogo Counter Display - Varispeed Head - Splash/Swarf Tray - Coolant System - Machine Kamp - Table Dimensions: 107cm x 23cm - Travel: 620mm x 30mm - Head: 180° rotation, 45° tilt - Machine Vice: 16cm wide with swivel base - LFA Chuck: 3/32" - 5/8"

This Millipore Guava EasyCyte 8HT Flow Cytometer was removed from a university lab where it was surp (more)lus to requirements. The system powers up and is in good cosmetic condition with only minor marks from use. The unit has been tested with samples but was showing readings of 200-300 when it should be showing readings of around 50000. We were unable to diagnose the exact fault. The unit has a Dell Optiplex 7010 PC paired with it. The PC includes a keyboard, mouse, monitor, USB and VGA Cable. It has had a brand new copy of 32bit Windows 7 installed. Guavasoft 3.1 has also been installed, which includes:ViaCount.InCyte (This requires an unlock code from Millipore to run).easyCheck.Guava Clean 3.1. We have been able to open and close the sample tray. This proves that the system is fully connected. It is sold for spares/repairs.

Technical features Flow rate 0.2-1.3 l / min Suction (max.) 3 mWg Operating pressure (max.) 4 bar (r (more)el.) Permitted fluid temperature 5-80°C Maximum permissible viscosity 150 cSt FFKM valve material Membrane material PTFE coating Pump head material PTFE, PP, PVDF Applications Transfer of liquids Qualitative characteristics Small footprint Simple and intuitive use Manual control Self-priming, it can run dry Splash-proof with IP65 protection rating Available with different material configurations for chemical resistance Maintenance free Pump head materials: PP, PVDF, PTFE Membrane material: PTFE coating Valve material: FFKM Simriz® VERSIONS S (standard): the flow rate can only be set manually, using the knob on the upper side, as shown in the photo. RC (remote control): the range can be controlled remotely, such as from a PC, including a fault alarm; a connection cable will be supplied. Supplied with fittings for 8 mm internal diameter tube. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Weighing range: 0 to 4100 g Readability (0 – 600 g): 0.01 g Readability (600 – 4100 g): 0.1 g Reprod (more)ucibility (0 – 600 g): 0.01 g Reproducibility (600 – 4100 g): 0.03 g Linearity (0 – 600 g): ± 0.05 g Linearity (600 – 4100 g): ± 0.02 g Weighing platform: 170 mm Dimensions (WxDxH): 194 x 316 x 68 mm Weight: 3.8 kg Including Mettler LabPac – M terminal

Capacity: 150 kg Minimum weighing range: 0 – 60 kg: 400 g 60 – 150 kg: 1 kg Readability: 0 – 60 kg:  (more)20 g 60 – 150 kg: 50 g Dimensions scale (WxDxH): 520 x 400 x 100 mm Dimensions console (WxØ): 305 x 75 mm

Qiagen QIAcube Automated DNA / RNA Purification Robot This was removed from a university lab where i (more)t was surplus to requirements. It is in good cosmetic condition internally and externally, other than a missing panel covering the power button. Error 5167 happens when attempting to close the centrifuge lid because it is stuck open.Error with the centrifuge: cover opens before lid moves. We were unable to test this further. Therefore this item is sold as Spares or Repairs.

Uvitec Uvidoc Gel Imaging System With Monitor And Thermal Printer This system was removed from a uni (more)versity lab where it was surplus to requirements. All included units are in good cosmetic condition and appear to be in working order. We are unable to conduct further testing at our facility. System consists of: - Uvitec Uvidoc Gel Imaging System DOC-008.XD - S/N- 04 10887 - Rainbow CCTV RMBI92 Monitor - S/N- 0303017047 - Mitsubushi P91E Thermal Printer

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: flat polygonal sheet Nominal value: 10 mg Material: Nickel silver High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.