PUC Probst & Class Kolloidmühle K60 Mühle Colloid Mill K60/0/RD

Millipore Milli-Q Advantage A10 Water Purification System with Pod Model: Z00Q0V0T0 Included : - P.O (more).D. - Wall Mount Without tank Without Q-Gard T1 purification cartridge Without Quantum TEX polishing cartridge Missing some connections Height: 49.7 cm Width: 33.2 cm Depth: 36cm Operating weight: 19 kg Water production (l/min): Up to 2 l/min Year of commissioning: 2011

The Synergy Water Purification System is fed with pretreated water (Elix, RO, distilled or DI water) (more) coming from a tank or a loop. When Product Water is being dispensed, the Inlet Solenoid Valve opens and the Booster Pump turns on. The pretreated water is then pumped into the UV Lamp (UV System). The UV Lamp emits light at 185 nm and 254 nm. It is used to reduce levels of organic molecules in the water. The UV Lamp is a consumable device that needs to be periodically replaced during the maintenance of the system. The water is then sent to the SynergyPak cartridge to deionize the water. There are three types of SynergyPak. SynergyPak 1 is used for RO, distilled or Elix feedwater. SynergyPak 2 is used for pretreated water from clean DI (particulate-free). SynergyPak 3 is used for pretreated water from dirty DI (non particulate-free). The SynergyPak is a consumable device that needs to be periodically replaced during the maintenance of the system. The Final Filter is a membrane based filter that  removes all particles and bacteria with a size greater than the filter pore size. The Final Filter is a consumable device.

Assorted Polythene Drum & Dollys Millipore, Thermo Scientific, Various Sizes Included are; 2 x T (more)hermo Scientific Nalgene 1100-0015 Cylindrical containers1 x Thermo Scientific Nalgene 11200-0030Cylindrical container2 x Millipore Mobius® Polyethylene Drums 100L 2 x Millipore Mobius® Polyethylene Drums 50L 1 x Millipore Mobius® Polyethylene Drum 200L All drums are in good used cosmetic condition.Tank liners 28L/ 7 Gallons x 18 Drum dolly x 13 32 inch Steel Stirrer x 422 inch Steel Stirrer x 1

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: 3°C to 16°C Maximum fluctuation: 3.6 °C Maximum gradient: 4.1 °C Defrosting syste (more)m: Automatic defrosting system Cooling system: Dynamic Capacity: 344 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1635 x 440 x 435 mm Weight: 65 kg

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 500 mg Material: nickel silver M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Crest P2600HT-45 Digital Ultrasonic CleanerFeatures - Ceramically enhanced transducer technology wit (more)h industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P2600HT-45 Digital Ultrasonic Cleaner is a high-performance cleaning unit designed to deliver exceptional results. Operating at an ultrasonic frequency of approximately 45 kHz, it features ceramically enhanced transducer technology with industrial bonded assembly to ensure a homogenous sound field and effective energy distribution. The unit is equipped with a digital control and display, allowing precise adjustment of the cleaning time from 1 to 99 minutes, or continuous operation. The integrated heater allows the liquid temperature to be adjusted in 1K increments up to 80°C. The deep-drawn stainless steel cleaning tank, with rounded corners, facilitates easy maintenance, while the intrinsically safe heater includes dry-run protection for safe operation. With a substantial tank capacity of 7 gallons (26.1 liters) and an average ultrasonic power of 300 watts, this cleaner is ideal for extensive cleaning applications. Additionally, it includes a drain valve assembly for tanks with capacities of 2.5 gallons or more, enhancing usability and efficiency. INCLUDED: The Crest P2600HT-45 Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty