MC-80 Water Cooling Manual Metallographic Cutting Machine w/ Stand

This Jun-Air 2000-40MD2 Compressor was removed from a university lab where it was surplus to require (more)ments. The unit powers up and is in working order. The item is in a reasonable, used cosmetic condition. There is some damage in the top right of the unit. Hours - 11134 71

This Struers LaboPol-1 Polishing Machine was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and is in good working order. It is in reasonable cosmetic condition but is well used.

Pakawaste VB56 Vertical Cardboard Baler Machine This unit was removed from a university where it was (more) surplus to requirement. It is in reasonably good cosmetic condition, but unable to test due to the required Key not being included. The client stated the following: "No keys were supplied with them, they were working up until they were switched off and have not been powered on since. Stopped using them as health and safety told staff to no longer use"

PSS / Ramada Warehouse Shelf Racking with Boards Included are the following; Uprights, which are all (more) 90cm deep. 586cmQty: 6 507cmQty: 5   389cmQty: 5 Beams 278.5cm lengthQty: 226 Boards 134x89.5cmQty: enough for all beam levels. We're happy to supply equal boards to beams (as 2 beams per level and 2 boards per level). Column guards and be included - 1 per upright We are happy to sell as a split purchase or full load Collection only from CF83 3HUWe can forklift load onto a suitable vehicle

Mobile retention tank DENIOS PolySafe FSR 6.2 made of polyethylene (PE) Retention trolley External d (more)imensions (W x D x H): 795 x 645 x 315 mm Collection (retention) volume: 60 litres Storage capacity: Small containers up to 60 litres Total load: 120 kg With metal grating On 4 castors

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Scilogex MS7-HP550-S LED Digital Square Magnetic HotplateThe Scilogex MS7-HP550-S LED Digital Square (more) Magnetic Hotplate is one of the most technically advanced hotplates in the marketplace. Simply turn the heat button to set the desired temperature with the LED display and the actual real-time temperature is clearly displayed. The MS7-HP550-S controls temperature at +/- 5ºC. Click Here to View Product Video INCLUDED: The Scilogex MS7-HP550-S LED Digital Square Magnetic Hotplate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus 30314833 20 x 10ml Fixed Angle Rotor The Ohaus 30314833 20 x 10ml Fixed Angle Rotor accommodat (more)es a capacity of up to 20 x 10 ml. This rotor is designed for use with Ohaus FC5816, FC5816R, FC5718, FC5718R, FC5916, and FC5916R series centrifuges. The Ohaus 30314833 fixed angle rotor reaches speeds up to 16,000 RPM with a maximum RCF of 28,045 x g. INCLUDED: The Ohaus 30314833 20 x 10ml Fixed Angle Rotor includes: - Ohaus 30314833 20 x 10ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA R 1303 Dissolver Stirrer Radial flow, for drawing the material to be mixed from the top and the (more) bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.Stirrer Ø: 40 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1303 Dissolver Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Accuris W3300-10K - Compact Balance, 10000 grams, readability 0.1 grams, 115V Accuris Compact balanc (more)es have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.Accuris Compact balances have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.The Compact line includes 6 models covering a wide range of maximum weight capacities. The lower capacity units (120g, 300g, and 500g) are readable to 0.01 g and come with a draft shield ring to prevent air currents from affecting measurements. These models feature a 4.5-inch diameter, stainless steel weigh pan. The larger capacity models (1000g, 5000g, and 10,000g) do not include the draft shield ring, come with larger weighing pans of 6.3 to 7-inch diameter, and are readable to 0.1g.All balances in the Accuris Compact line offer large, brightly lit LCD panels, and are easy to operate using the intuitive and splash-resistant control panel. Different modes allow weight to be displayed in various units: grams, ounces, carats, and simple programs can be used for piece counting and percent deviation weighing.Leveling feet are located toward the front of the balance for easy access, and a leveling bubble in the control panel is easy to see for quick and simple leveling on the lab bench. The balances can be calibrated using a calibration weight and a few keystrokes on the control panel – just select a calibration point in the calibration mode, place the calibration weight onto the weighing pan, and press the “CAL” button.Lightweight, and small in size, Accuris Compact balances will provide years of trouble-free service.INCLUDED: The Accuris W3300-10K - Compact Balance, 10000 grams, readability 0.1 grams, 115V includes: - Weighing Pan - Power Cord - One Year Manufacturer's Warranty

Dimensions (HxWxD): 770 x 2000 x 600 mm