GEA Niro Soavi Panda Plus 2000 High Pressure Homogenizer 200 Mpa (2016)

Constant Cell Disruption Systems Model T2 40 AA AA Homogeniser French Press Lab This system was remo (more)ved from a university where it was surplus to requirement. The previous client stated this system was in full working order, prior to removal. When powered up, the system successfully passed all self-checks. All elements are in good cosmetic condition. Model Code T2 40 AA AASerial No. 525Firmware v6.10Boot v4.15 Additional parts Included: 1 x user manual4 x allen keys2 x jet removal tools1 x pair of Richmond needle-nosed pliers1 x tube of Dow Corning high vacuum grease, half-used1 x step cranked 14mm spanner1 x 127mm steel flange1 x large internal 6cm valve2 x 60ml syringes1 x 5ml syringe1 x plastic T-fork2 x O-rings Part No. KE9041 x O-rings Part No. KE16083 x O-rings Part No. BOF000761 x O-rings Part No. BOF001761 x O-rings Part No. BOF003147 x O-rings Part No. BOF000732 x target anvils Part No. KE23995 x seal assembly Part No. DRG027012 x hard cases for spares and tools

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The SpeedMill PLUS is a highly efficient homogenization system for various starting materials used f (more)or the subsequent isolation and purification of DNA, RNA or proteins. This new process allows users to operate the SpeedMill PLUS continuously if necessary. The high efficiency of energy input into the sample, based on a vertical movement, procures a homogeneous disruption of the sample without destroying the target molecules. Homogenization time: 30 sec to 4 min (depending on the starting material) Programmable homogenization step: 1 sec to 4:59 min Number of cycles: 1 – 99 Protocol steps: 1 – 6 Storable protocols: 20 Sample cooling: Passive cooled sample holder storage at temperatures down to -80°C

Qaigen Tissuelyser II unit and Qaigen Tissuelyser adapter set 2 x 24 (box) This was removed from a u (more)niversity lab where it was surplus to requirements. The unit powers up and is in very good cosmetic condition. We are unable to test it further at our facility. The client confirmed it had never been used and is brand new. Includes the following; Model-TissueLyser II Qaigen Tissuelyser adapter set 2 x 24 (box Sealed)

Scilogex D500 Homogenizer Drive MotorClick Here to View Product Video INCLUDED: The Scilogex D500 Ho (more)mogenizer Drive Motor includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Summa D60R Optical Guided Vinyl Cutter This item was removed from a university where it was surplus  (more)to requirements. The unit is in very good cosmetic condition and was described by the previous owner as being in working condition.We are unable to test it fully at our facility. Please note: this item does not include a stand Specifications: - Serial No.: 651105-10008 - Max Working Width: 600mm - Max Working Length: 50 metres - Material Thickness: 0.05 to 0.25mm (up to 0.8mm with optional sandblast knife) Included: - Data cable

This listing is for a Kyosha KyoLine C029-k5 Printer.The unit is in full working condition and is re (more)ady for immediate release.The Kyosha KyoLine Printer series consists of compact and portable thermal printers designed for mobile applications. They are widely recognized for their affordability, reliability, and the ability to provide bi-directional thermal printing, ensuring high efficiency and accuracy. These printers are suited for industries that require quick, on-the-go printing, such as logistics, retail, and healthcare.Key Features:Compact & Portable: The KyoLine series is designed for mobility, making it ideal for field operations or environments with limited space.Bi-directional Thermal Printing: The moving head thermal system ensures consistent, high-quality printing by enabling bi-directional print movement.Printing Speed: Prints at a steady rate of 1.4 lines per second, suitable for quick and efficient receipt or label printing.Quiet Operation: The thermal printing mechanism produces minimal noise, ideal for environments where quiet operation is required.Wireless Connectivity: Equipped with various connectivity options including:RS232 and TTL serial connections for wired integration.Bluetooth for seamless wireless operation, enhancing portability and ease of use.Customizable: Kyosha offers customization options to adapt the printers to specific customer needs, making them versatile for various industry applications.High-Grade Thermal Paper: Designed to work with high-grade thermal paper, ensuring clear and durable prints.

These roller mixers provide a gentle, but highly efficient, rocking and rolling action. Control is t (more)hrough a simple on/off switch and the unit will run continuously at the fixed speed of 33 rpm. Recommended for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units can be used in incubators up to 60°C and humidity up to 80%, or in cold rooms down to 4°C. Most sizes of tubes, Bijoux, Universals and bottles can be accommodated, up to 100mm diameter. Number of rollers: 10 Speed: 33 rpm Amplitude: 16 mm Maximum load: 3.0 kg Controls: Analogue Timer: No Roller size (l x diameter): 300 x 30 mm Attention 120V!

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Branson CPX8800H Digital Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wav (more)es and creates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer and continuous ultrasonic operation. - Can be heated up to 69°C/156.2°F and set for either Fahrenheit or Celsius. - Last stored parameters are recalled when unit is turned back on. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and ultrasonic duration. Bransonic baths completely remove flux and contaminants from such precision parts as PC boards, SMDs, quartz crystals, capacitors, and many others. Branson ultrasonic cleaners can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids. Bransonic CPXH heated ultrasonic baths are the most technologically advanced ultrasonic baths available. With programmable features, digital operation with power tracking capabilities to adjust for light or heavy loads, high/low power control, and degassing, the CPXH is the most versatile system available. The CPXH baths offer the following features: The CPXH degassing period can be set up to 99 minutes. Extended degas time periods allow for “beyond cleaning” applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. Constant activity/power tracking automatically maintains the same ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Consult with your Branson representative about the Bransonic accessories and solution best suited for your application needs. Visit us at www.Bransonic.com Bransonic® CPXH Ultrasonic Baths The CPXH Series is completely programmable. Once the process is entered into the controller, the end user only has to start the program and they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run time period is reached, the unit shuts off, delivering the same results – every time. When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing. When cleaning delicate parts, the CPXH allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. Click Here to View Product Video INCLUDED: The Branson CPXH8800 Digital Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Adam Equipment STB 6202E Solis Precision Balance, 6200g, 0.01g Capacity 6200g Readability 0.01g Rep (more)eatability 0.02g Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Precision Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. The Solis Precision Balance line features 11 different models that offer internal or external calibration, capacities from 360g to 8200g, and readabilities from 0.001g to 0.01g. The Solis Precision Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment STB 6202E Solis Precision Balance, 6200g, 0.01g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty