Vankel VK 7010 Dissolution System with VK 750D Heater/Circulator

Labconco RapidVapVacuum Evaporation System with Lid HeaterAdvanced vacuum function Microprocessor  (more) controls vacuum at preset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900002 RapidVapVacuum Evaporation System with Lid Heater, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corepoint Scientific PRF102WWW-0 Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Fre (more)ezer Temperature Setpoint Range Refrigerator: 1C to 10C; Freezer: -15C -25C Capacity 5.2 cu. ft. capacity Refrigerator / 4 cu. ft. capacity Freezer Defrost Method Refrigerator: Cycle; Freezer: Manual Features - Refrigerator capacity of 5.2 Cu. Ft. and freezer capacity of 4.0 Cu. Ft., ideal for storing a variety of sensitive materials. - Each compartment features its own microprocessor temperature controller with digital displays, ensuring precise temperature control from 1°C to 10°C in the refrigerator and -15°C to -25°C in the freezer. - Equipped with two solid, right-hinged, self-closing doors featuring magnetic gaskets to maintain a consistent and efficient seal. - Offers three adjustable shelves in the refrigerator and two fixed shelves in the freezer, plus three removable baskets in the freezer for versatile storage solutions. - Includes audible and visual alarms for both the refrigerator and freezer to alert to high or low temperatures and door ajar conditions. - Compatible with Pyxis®, Omnicell®, and AcuDose RX® systems, making it suitable for a range of medical and laboratory applications. The Corepoint Scientific PRF102WWW-0 Solid Door Laboratory Combo is a compact and efficient refrigeration solution, designed to meet the rigorous demands of scientific environments. This unit combines a 5.2 cubic feet refrigerator and a 4.0 cubic feet freezer, each with its own microprocessor temperature controller for precise temperature management. The refrigerator operates between 1°C to 10°C, and the freezer between -15°C to -25°C, making it ideal for storing sensitive laboratory materials. Features include two solid, right-hinged, self-closing doors with magnetic gaskets for a secure seal, ensuring consistent internal temperatures and energy efficiency. The refrigerator offers three adjustable shelves and the freezer two fixed shelves, along with three removable baskets, accommodating a variety of storage needs. Additional highlights include forced draft air circulation in the refrigerator for uniform cooling, manual and cycle defrost systems in the freezer and refrigerator respectively, and compatibility with Pyxis®, Omnicell®, and AcuDose RX® systems. Enhanced safety is provided through audible and visual alarms for both temperature deviations and door openings, ensuring sample security and integrity. This model requires minimal space with its streamlined dimensions, yet offers robust performance and durability with its powder coat steel exterior and high-density urethane foam insulation. INCLUDED: The Corepoint Scientific PRF102WWW-0 Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Stacking Kit - Leveling Legs - 3 Adjustable Refrigerator Shelves - 2 Fixed Freezer Shelves - Key for Door Lock - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Corepoint Scientific NSPF171WWW-0MHC -15C to -25C Single Swing Solid Door Freezer Temperature Setpoi (more)nt Range -15°C to -25°C Capacity 17 Cu. Ft. Defrost Method Manual Features - Maintains temperatures between -15°C to -25°C (5°F to -13°F) for optimal sample preservation. - Features a digital temperature display that can switch between °C and °F, ensuring accurate temperature monitoring. - White powder-coated steel exterior with high-density urethane foam insulation for superior thermal efficiency. - Equipped with a solid, right-hinged door featuring a magnetic door gasket for a positive seal. - Keyed door lock to secure contents and prevent unauthorized access. - Standard digital temperature display with two probes for accurate temperature readings inside the unit. - High and low temperature alarms alert staff to potential issues before they affect stored contents. The Corepoint Scientific NSPF171WWW-0MHC Freezer provides 17 cubic feet of specialized cold storage, perfect for scientific and industrial settings requiring consistent low-temperature conditions. It operates effectively between -15°C to -25°C (5°F to -13°F), thanks to a precise microprocessor temperature controller with an easy-to-read digital display that can toggle between °C and °F. This unit features a solid, right-hinged door with a magnetic gasket to ensure a tight seal and is secured with a recessed handle and keyed door lock for restricted access. With its six fixed shelves, managing various materials efficiently is straightforward, and the manual defrost system keeps the freezer running optimally. Enhanced safety and operation are provided by audible and visual alarms, which alert to any temperature discrepancies. Constructed with EPA compliant high-density urethane foam and coated in durable white powder steel, this freezer is not only robust but also eco-friendly with its use of R290 refrigerant. The design includes leveling legs for easy installation and stable operation, making the Corepoint Scientific NSPF171WWW-0MHC an excellent choice for any lab needing reliable and secure freezing capabilities. INCLUDED: The Corepoint Scientific NSPF171WWW-0MHC -15C to -25C Single Swing Solid Door Freezer includes: - 6 Fixed Shelves - Leveling Legs - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

RET Control heated magnetic stirrer 20 liters with integrated IKA scale New equipment in its origina (more)l packaging Model: RET Control-Visc Integrated scale (up to 2 kg) BNC socket, possibility of connecting a pH electrode RS 232 and USB sockets for PC interface Pt100 temperature probe included Digital display on TFT screen Safety circuit DIN 12878 connection for external temperature probe Max volume: 20 l Material: Plate: stainless steel Dimensions L x W x H: 160 x 270 x 85 mm Dimensions ø plate: 135 mm Dimensions, length: max. bar: 80 mm Display: Digital, TFT screen Temperature: Heating temperature: ambient to 340°C Protection: IP 21 Power supply: 230 V / 50 - 60 Hz Weight: 3 kg Stirring capacity: 20 l Speed: 50 - 1700 rpm Ambient conditions: Allowable temperature: 5 to 40 °C / RH: 80%

Memmert UN75 Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Convection T (more)ype Natural Convection Chamber Volume 74L Features - 74 L (2.6 cu.ft.) chamber volume suitable for various sample sizes - Temperature range from +5°C above ambient to +300°C for flexible applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature monitoring - SingleDISPLAY digital PID-microprocessor controller with high-definition TFT-color display - Natural convection system ensures uniform heat distribution - Pre-heated fresh air admixture via electronically adjustable air flap - Sturdy, corrosion-resistant stainless steel interior with integrated heating on all sides - Powerful 115 V, 50/60 Hz, approx. 1800 W design for consistent performance The Memmert UN75 Natural Convection Oven 74L, 115V offers precise temperature control from +5°C above ambient to 300°C, ideal for various applications in laboratory settings. With a spacious 74 L (2.6 cu.ft.) chamber, this oven accommodates a range of sample sizes while maintaining consistent, uniform heating through its natural convection system. Its SingleDISPLAY digital PID-microprocessor controller provides easy monitoring with a high-definition TFT display, complemented by a Pt100 sensor DIN class A in a 4-wire circuit for precise temperature regulation. Designed for durability, the oven features a corrosion-resistant stainless steel interior with integrated heating on all sides and an electronically adjustable air flap for optimal air exchange, powered by a reliable 115 V, 50/60 Hz setup at approximately 1800 W. INCLUDED: The Memmert UN75 Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Gilson PIPETMAN M Multichannel P12x100M BT Connected Pipette PIPETMAN M Connected is a Bluetooth ena (more)bled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, the PIPETMAN M Connected Pipettes help reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected, making planning and executing pipetting protocols faster, easier, and more reliable. The PIPETMAN M Connected Pipettes are available in 20 models covering a volume range from 0.5 µL to 10mL in single channel configurations, and 0.5 µL to 1200 µL in multichannel configurations. Accurate and Precise PipettingThe motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, the PIPETMAN M BT Connected Series reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette.Increased FunctionalityThe intuitive interface has five pipetting modes for a larger number of applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from the PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions.Simple and Comfortable to UseAspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M Multichannel P12x100M BT Connected Pipette includes: - 5V Power Supply with AC Adapter and Cable - Four Battery & Ejector Tags - Manufacturer's Documentation - Operator's Guide - 2 Year Manufacturer's Warranty

Edwards nXDS15i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS15i Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15i Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iEdwards nXDS10iEdwards nXDS15iEdwards nXDS20iNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.8 / 4.012.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

The Malvern Panalytical NanoSight NS500 instrument provides an easy-to-use, reproducible platform fo (more)r nanoparticle characterization. The NS500 provides detailed and intuitive analysis of the size distribution and concentration of all types of nanoparticles from 10nm to 2000nm in diameter, depending on the instrument configuration and sample type being analyzed. Single particle zeta potential measurements on the NS500 provide inherent high resolution zeta distributions which can be measured simultaneously with other NTA measurements parameters like size, particle concentration and can even operate whilst in fluorescence mode. Light source: 405nm (violet), 488nm (blue), 532nm (green) or 642nm (red) Size range: 10 nm – 1000 nm Particle concentration: 10⁶ to 10⁹ particles/mL Minimum sample volume: 250 μL Dimensions (WxDxH): 530 x 250 x 400 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW