Kratos Analytical Instruments Inlet Heater Control DRG No. A23689W-R3 Lab

The system includes: pt100 probe (code A00000268), magnetic stir bar Ø8x40 mm (code A00000356). Magn (more)etic stirrer AREC.X 7 Precise and accurate thermoregulation for better reproducibility AREC.X 7 is equipped with state-of-the-art heating plate technology, designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. The AREC.X 7 can be connected to the external Pt100 probe or to the VTF for precise thermoregulation of the fluid. The probe guarantees thermoregulation up to 250°C, with an accuracy of ± 1.0°C, while the VTF guarantees excellent thermoregulation performance up to 300°C and an accuracy of ± 0.5°C. The VTF is equipped with a timer, for unsupervised operation and increased productivity. Powerful stirring for your lab reactions You can rely on the AREC.X 7 for demanding laboratory reactions, as it agitates volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. Absolute safety and ease of use for laboratory operators The AREC.X 7 hotplate stirrer guarantees a superior level of safety and protection for laboratory operators, since it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents. When the platen temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic soleplate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. Save time with the new control panel Thanks to the digital display, extremely bright and easy to read, it is possible to constantly monitor the temperature. Two new comfortable knobs: the left one for the temperature (up to 550°C), the right one for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the laboratory hood.

Hybaid Maxi 14 Hybridisation Oven This was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and is in good working order, but may need calibrating to your equipment. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks. Internal Dimensions - D34 W34 H50cm

Planer Kryo 10 Series ii, MVE Lab 30, Controlled Rate Freezer System Lab This system was removed fro (more)m a university where it was surplus to requirement. All units are in reasonably good cosmetic condition. The Planer Kyro 10 Series ii Freezer & Planer Kyro 10 Series ii Biomed MR2 Printer both power on and pair successfully. The printer requires a Passcode which is available on request. We were unable to test the Planer LNP 4-C Freezer & Power Supply as the power supply cable is not included, therefore we are unable to confirm its working order. Also included are the following: 2 x washers for Paner FreezerSerial#: 24 707 2 x Spare paper for Planer Freezer Trolley stand with wheels

Angelantoni Platinum 500 SV Ultra Low Temperature Freezer Lab This item was removed from a universit (more)y where it was surplus to requirement. The unit powers up and is in good working order to -45˚C It is in reasonably good cosmetic condition externally and in good cosmetic condition internally. This item features a key lock with the required key included.

Ohaus HB2DG Digital Dry Block Heater, 2 Block Temperature Range Ambient +5°C to 120°C Control Digita (more)l Uniformity Within the Block ± 0.1°C at 37°C Features - Offers accurate and fast sample heating with PID microprocessor temperature control - Supports two interchangeable modular blocks with over 40 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Equipped with a clear LED display and easy-to-use touchpad controls with independent displays for temperature and time - Timer from 1 second to 9,999 minutes - Includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB2DG Digital Dry Block Heater offers accurate and fast sample heating with PID microprocessor temperature control, making it perfect for various applications that demand consistent heating. This heater accommodates two interchangeable modular blocks, providing over 40 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB2DG features a robust painted steel housing and is equipped with a clear LED display, easy-to-use touchpad controls with independent displays for temperature and time, and an audible alarm, enhancing usability and precision. This Dry Block Heater also includes a unique single point calibration feature to match the block heater's display to a known external temperature standard for 3 temperature setpoints, making it a superior choice for modern lab environments.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB2DG Digital Dry Block Heater, 2 Block includes: - Support Rod Holder with Locking Knob - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V Flow Rate 15L/min  (more)(4 gpm) Temperature Range -10C to 30C Cooling Capacity 450W at 20C Features - Intuitive touchscreen display with 5 operating languages (Chinese, English, French, German, Spanish) - Full text messages and audible alarms - Continuous fluid level monitoring to prevent premature pump failure - Variable Fan Speed Technology for quieter operation - UV Light Biological Growth Inhibitor - Patented Self-diagnostic system - Low flow shutoff and alarm, high and low temperature alarms - Displayable temperature units in °C or °F The Polyscience BA06A1G3-110A1NC DuraChill Benchtop Chiller offers advanced cooling technology with a temperature range of -20C to 30C and a cooling capacity that varies from 150W at -20C to 900W at 20C. It features a microprocessor-based temperature controller with a high-resolution TFT LCD display, enabling temperature readouts in °C or °F and pressure display with an accuracy of ± 35% of full scale. The user-friendly interface includes a touch screen display, a multi-language interface, and touch keypad for precise temperature set-point adjustments. The chiller utilizes a Cool Command modulated refrigeration system to enhance temperature stability and extend compressor life, while the WhisperCool Environmental Control System optimizes noise reduction and energy efficiency. It comes equipped with a centrifugal (magnetic drive) pump capable of delivering a flow rate of 15L/min at 0 psi, with pressure up to 18 psi. Additional features include continuous level sensing in the standard reservoir (1.5L capacity) for pump protection, and an optional UV Anti-Growth Light to prevent biological growth in the process fluid. This makes the DuraChill Chiller a robust and efficient solution for demanding applications where tap water cooling systems fall short. Click Here to View Product Video INCLUDED: The PPolyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V includes: - 1 Pair of 1/2" NPT x 3/8" Barbed Fittings - 1 Pair of 1/2" NPT x 1/2" Barbed Fittings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Genlab SP/LCI/320/SS/DIG Laboratory Incubator This was removed from a working lab where it was surpl (more)us to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks 6 Baskets/Drawers - 51 x 50 x 15cm

Laboratory turnkey Bioer GeneLab. Integral solution that enables the reduction of costs and commissi (more)oning times. Includes areas of separate work with the photo the paneling tight sandwich-type steel floor PVC a heat-sealed bag, seals type, scotland, lighting, furniture, pressurization positive/negative for contamination control, air filtration, germicidal light, locks between rooms, for transfer of samples, pre-installation of electrical systems, hvac, telephony and the internet. Different configurations to choose suitable for laboratories of molecular biology and cell culture, among others.

Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.)cu.ft.) Features - 384 L (13.6 cu. ft.) volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert HPP410eco Climate Chamber 384L, 115V offers precise climate control for a wide range of laboratory applications. With a 384-liter capacity and a temperature range from +5°C to +70°C (with humidity) or 0°C to +70°C (without humidity), this chamber provides versatile conditions for storage and incubation. Equipped with dual Pt100 sensors for accurate temperature control to 0.1°C, it ensures reliable performance and consistent environmental conditions. The adjustable humidity range from 10% to 90% RH, controlled by a hot steam generator and dehumidified by Peltier technology, allows for flexible climate simulation, making it ideal for sensitive samples. The TwinDISPLAY control system, powered by a PID microprocessor, ensures easy and precise adjustments, while the AtmoCONTROL software enables programmability via USB or Ethernet. Safety is a top priority, with the integrated AutoSAFETY system offering visual and acoustic alarms for over- and undertemperature protection. The durable stainless steel door with a 2-point locking system and an inner glass door provides secure access while maintaining energy efficiency. With a maximum chamber load of 440 lbs and support for up to 14 shelves, the HPP410eco delivers exceptional capacity and reliability for demanding laboratory environments. INCLUDED: The Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA Vortex 3 Vortexer Shaking Movement Orbital Orbit Diameter 4 mm Speed Range 500-2,500 rpm Featu (more)res - Suitable for short-time (touch function) or continuous operation. - Wide, infinitely adjustable speed range. - Attachments and inserts available for tubes, microplates, and flasks - Attachments securely click onto appliance; special strap available for easy handling of flasks. - Sturdy zinc die cast casing with a compact design. - Stable at high speeds; ultra-high vibration damping and low self-heating motor. The vortex shaker is designed for both short-time (touch function) and continuous operation, making it versatile and efficient for various laboratory needs. Its wide, infinitely adjustable speed range and compatibility with multiple attachments and inserts (such as Eppendorf tubes, microtiter plates, and 250 ml Erlenmeyer flasks) allow for a wide range of applications. The shaker features a sturdy zinc die cast casing, a compact design, and stability at high speeds thanks to its special feet with ultra-high vibration damping and a self-ventilating motor for low self-heating.

IKA MS 3 Control Shaker Type of Movement Orbital Speed Range 100 to 3,000 RPM Shaking Stroke 4.5 mm (more) Features - Wide range of attachments - Attachment detection - Timer with countdown function - Stable in all speed ranges - Sturdy zinc die cast casing - USB connection for remote control - Continuous or touch operation (with standard attachment) The compact, universal small shaker is ideal for shaking tasks with small vessels and microtiter plates. It offers a wide range of attachments and features attachment detection, ensuring stability across all speed ranges. The timer with countdown function and sturdy zinc die-cast casing enhance its reliability. The shaker provides USB connectivity for remote control and supports continuous or touch operation with the standard attachment. It operates in two modes: Mode A, which limits speed to 1,300 rpm with non-standard attachments, and Mode B, allowing speeds up to 3,000 rpm with all attachments. Its orbital movement has a shaking stroke of 4.5 mm, and it supports a speed range of 100 - 3000 rpm with an LCD speed display.