Haier Freezer Rack BIN976A Set of 6

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

This listing is for a New Brunswick U410-86 Ultra Low Temperature Freezer. The unit is in full work (more)ing condition and is ready for immediate release. Introducing the New Brunswick U410-86 Ultra Low Temperature Freezer, the ultimate solution for laboratories requiring reliable storage of sensitive medical and scientific materials. Engineered for precision, this premium upright freezer maintains a temperature range of -86°C to -50°C, ensuring optimal protection for your valuable samples. Key Features: Superior Insulation: Equipped with 5.1 inches (130mm) of traditional polyurethane insulation, the U410-86 efficiently maintains low temperatures, minimizing energy consumption. Durable Construction: The exterior is crafted from 18 gauge powder-coated steel, resistant to scratches and rust, while the polished 304L stainless steel interior offers easy cleaning and longevity. Energy Efficient: Consuming only 12.9 kWh/day, this freezer is designed to reduce operational costs without compromising performance. Rapid Pull-Down Time: Achieve set temperatures in just 4.1 hours from ambient conditions, ensuring quick access to critical samples. Technical Specifications: Capacity: 14.5 ft³ (410 litres) Dimensions: 76.8 x 26.4 x 34.1 inches (H x W x D) Weight: 518 pounds Voltage Options: Available in 120V and 208V configurations Power Consumption: 8.7 kWh/day with a full load amp draw of 16 amps Caster Wheels: Standard for easy mobility With a 25-year track record in ultra-low temperature storage, New Brunswick Scientific ensures the integrity of your research materials. The U410-86 is an excellent alternative to the Innova U535, featuring the same high-efficiency compressor system, making it a smart choice for laboratories seeking dependable performance.

LEICA EM-PACT 1 High Pressure Freezer w/ EM-AFS Low Temperature Embedding System This was removed fr (more)om a university lab where it was surplus to requirements. The system powers up but we were unable to test it properly without access to liquid nitrogen. The lab did confirm it was in working order when last used. It is in good cosmetic condition with minor marks. Included are; LEICA EM-PACT 1 High Pressure FreezerType: 706802Serial#: 519799 LEICA EM-AFS Low Temperature Embedding SystemType: 702701Serial#: 518928 LEICA EM-UVType: 702727Serial#: 519711 JDC- 10 10 litre Dewar vesselSerial#: 00958 Also included is the following: 2 x Application of the Leica EM PACT2 and EM RTS Disc LEICA EM AFS Operating Manual LEICA EM PACT Operating Manual LEICA EM PACT Application Brochure 5 x Service kit with various replacement parts

Thermo Scientific HERAfreeze Ultra Low Temperature Freezer HDE40086FV This item was removed from a u (more)niversity lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition. Keys included.

SPEX SamplePrep Freezer/Mill 6770 Cryogenic Mill This item was removed from a university laboratory  (more)where it was surplus to requirements. The mill powers on and is in fair cosmetic condition. We are unable to conduct further testing at our facility. Specifications: - Model: 6770 - Serial No.: 10305

New generation! The OHAUS Scout Scale, with its large backlit LCD display and integrated educational (more) software is the ideal tool for use in the classroom. Offering world-class overload protection, fast stabilization times, increased capacity, more connection options, and a stackable design—the ultimate educational weighing experience. - Excellent overload protection and practical stackable design - Backlit LCD display and 4-button operation: very easy to use in all conditions - High weighing speed and high resolution display The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options ensure a more modern and smarter student experience, increasing accuracy and efficiency. Other Standard Features and Equipment Transport lock, stainless steel weighing pan, menu and adjustment lockout switch, software and mechanical overload/underload protection, stability indicator, auto tare, low battery indicator, auto power off user selectable print options and communication settings. Applications Weighing: allows you to calculate the weight of the samples in the selected unit of measure. Density determination: calculation of the density of solids or liquids. With the built-in weigh below hook, you can test for the specific gravity of objects that cannot be placed on the weighing pan. Molar Concentration: Calculate the mass of a sample and automatically convert to the molar concentration. MODELS AVAILABLE: Applications Weighing, determination of density, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth™ (available as an accessory) Construction ABS housing, stainless steel bowl, ABS draft shield (1 mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Project features Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software over/underload protection, low battery indicator, auto power off, auto tare, span calibration mass included in models with capacity up to 620 g NO MORE BROKEN SCALES! The excellent overload protection of the Scout balance consists of a weighing pan made of high-strength stainless steel and a pan support made of impact-resistant plastic. The system allows the balance to safely support loads up to 10 times its rated capacity, withstanding use in even the most demanding educational environments. In addition, the integrated transport lock protects the load cell from damage during transport, stacking and storage.

This Miltenyi Biotec autoMACS Pro Cell Separator was removed from a university lab where it was surp (more)lus to requirements. The item turns on and is in good condition with only minor signs of use. When the device started up, it ran into an error with code 7033. The error message warned that the clock timer was not set, and we needed to select the "set_time" option from the user settings. We tried to dismiss the warning by pressing the OK button, but the touchscreen did not respond. Unfortunately, this meant we were unable to perform any further testing. Due to this item is sold as Spares/Repairs.

Pharmacia Biotech Chromatography Column XK 26/20 This was removed from a working lab where it was su (more)rplus to requirements. The unit is in good cosmetic condition but has been used previously.

VACUUBRAND PC 520 Select Chemistry Pumping Unit Ultimate Vacuum 7 mbar (5 Torr) Maximum Pumping Spe (more)ed 1.4 CFM at 60Hz Number of Heads/Stages 2/2 Features - VACUU·SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible results - Easy-to-use application editor allows own process sequences - Powerful vacuum pump with excellent chemical and condensate compatibility - PC 520 select allow simultaneous operation of two independent applications with electronic vacuum control This chemistry vacuum pumping unit is an economical, compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump. Based on our popular MZ 2C NT two-stage chemistry diaphragm pump, the PC 520 select is frequently used for medium-sized vacuum applications involving common solvents. Both vacuum ports have independent solenoid valves for electronic vacuum control, and check valves to protect against cross contamination and interference. With an intuitive, application-based interface, the VACUU·SELECT controller offers predefined vacuum processes for all common laboratory applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it detects the boiling pressure and switches to two point control to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 520 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

SCILOGEX SCI-3101UV Double-Beam Spectrophotometer Wavelength Range 190 to 1,100 nm Wavelength Accur (more)acy ±0.1nm @ 656.1nm; ±0.3nm @ all Optical System Double Beam, Grating 1200 lines/mm Features - 10.1 inches high resolution TFT colored capacitive touch screen and windows graphic interface - Powerful functions like Photometric measurement, Quantitative measurement, Kinetics, Spectrum scan, DNA Protein test, multi-wavelength test, etc - In-house massive memory is capable of saving up to 1024M for test data & working curves - Various optional accessories, like automatic cell holder, thermostatic automatic sampler, adjustable micro cell holder, reflection accessory and integrating sphere, etc. which extend the application range of device and combine the requirements of common samples and special ones - Supports USB storage. The USB port can be used for data transfer, which is easily exported to Excel for further processing, analysis and storage - Socket type deuterium and tungsten lamp can make lamps switching without optics debugging and easy to be replaced The SCILOGEX SCI-3101UV Double-Beam Spectrophotometer is designed for precision and advanced functionality, making it an ideal choice for diverse laboratory applications. Featuring a double-beam optical system with a 1200 lines/mm grating, it provides reliable measurements across a wavelength range of 190 to 1100 nm with a 1nm spectral bandwidth. Its 10.1-inch high-resolution TFT colored capacitive touch screen and intuitive Windows graphical interface streamline operation and enhance user experience. The spectrophotometer supports multiple work modes, including photometric measurement, quantitative analysis, kinetics, spectrum scanning, DNA/protein testing, and multi-wavelength analysis, catering to a wide range of research and analytical needs. The SCI-3101UV offers robust data handling capabilities, with on-board memory capable of storing up to 1024M of test data and working curves. Data can be seamlessly transferred and exported via the USB port for further analysis and storage in Excel. Its socket-type deuterium and tungsten lamps are designed for quick and hassle-free replacement without the need for optical alignment. GLP/GMP compliance ensures user management, logging, and data tracking meet rigorous standards. With optional accessories, including automatic cell holders, thermostatic samplers, and integrating spheres, the spectrophotometer extends its versatility for specialized applications. Compact yet durable, it comes with standard accessories such as glass and quartz cuvettes and is an indispensable tool for laboratories demanding high performance and compliance.INCLUDED: The SCILOGEX SCI-3101UV Double-Beam Spectrophotometer includes: - Tungsten Lamp - Deuterium Lamp - 4 x 10mm Glass Cuvettes - 2 x 10mm Quartz Cuvettes - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.