Yamato SG-828 28 in. Two Glove Compact Glove Box

Bassaire Containments Large Glove Box This system was removed from a university lab where it was sur (more)plus to requirements. The unit is in good cosmetic condition for its age, showing signs of use. It powered on, with internal lights, sockets, and the blower motor all functioning. However, the item failed a PAT test on insulation. No further testing was carried out. The client has made the following comment on its working condition - "The glovebox is semi-operational but with one problem, it cannot regulate its own pressure but the majority of parts are all in working order." Due to its failing of the PAT and the comment made by the previous client, this item is listed as Spares/Repair. Dimensions:- Internal: L 138cm x W 74cm x H 82cm - Containment opening: L 40cm x W 20cm x H 20cm Supplied with:- Edwards RV5 Vacuum Pump - Serial No.: 119482183 - Passed PAT test, powered on, and drained of oil. - Michell Instruments Series 1000E Hygrometer - Serial No.: 93776 - Powered on and appears to be working. Gloves are in good condition. This item does not have 110V fitted.

VAC HE-63-P PEDATROL GloveBox Lab This item was removed from a university where it was surplus to re (more)quirement. It is in reasonably good cosmetic condition. The item is missing its back panel, which prevents us from conducting tests due to exposed wires, therefore, it is sold as Spares/Repairs. Also includes the following:- Components for the machine- Tubing- Pipes- Automatic Dewpoint Meter

This Don Whitley VA500 Hypoxia Workstation Glove Box was removed from a university lab where it was  (more)surplus to requirements. The lab were unable to confirm the working status as it has not been used in some time, but did confirm that it requires a software upgrade. The unit powers up and the incubator is in working order. It has not been tested under vacuum. The lights are functional on both units. Glove door locks both working. The left glove insert is damaged. Rubber has separated from the ring. Both units are in good cosmetic condition. The back of Airlock does have some cracking on the external casing due to UV exposure. The unit was situated by a window at the university which caused this. Included with the system are; 1 x User manual folder for both units. 1 x "MACS Footswitch". it is in good cosmetic condition but we were unable to test it. It is wireless. 2x Gas regulators. Good condition, not tested.P/N - 4127822-01-B03S/N - 1350P4HRS/N - 1370Q7TV

Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox This was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in good working order but has not been tested under a vacuum. It is in good cosmetic condition with minor marks from use. It is supplied with; miniMACS Vacuum pump. Serial No. 2633819.miniMACS Footswitch assembly. Part No. A03107.Whitley DG250 Anaerobic Workstation User Manual.don whitley scientific 500/1000 Catalyst Sachet. Part No. A02130.don whitley scientific 500/1000 Anotox Sachet. Part No. A02129.don whitley scientific Natural Superflex Tubing. Part No. A00454.

Yamato SG-860 60 in. Four Glove Compact Glove Box Gloves 4 Gloves Maximum vacuum Transfer Chamber - (more)26” of Hg (660 torr) Maximum Pressure Main Chamber +6” of water column (11.2 torr) Features - Made in the USA - All models feature high visibility interior, cleanliness, safety, complete containment, portability and a draft-free atmopshere - All models are complete systems, nothing needs to be added except gas of choice: nitrogen, argon or other inert gases - Installed purging valves are ideal for lowering oxygen and humidity levels - Very useful when working with toxic substances, asbestos, fibers, sewage residue and harmful liquid vapors 60" Compact, completely sealed glove box with transfer chamber and flat access door for basic isolation and /or containment. INCLUDED: The Yamato SG-860 60 in. Four Glove Compact Glove Box includes: - Yamato SG-860 60 in. Four Glove Compact Glove Box - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato SG-848 48 in. Three Glove Compact Glove Box Gloves 3 Gloves Maximum vacuum Transfer Chamber  (more)-26” of Hg (660 torr) Maximum Pressure Main Chamber +6” of water column (11.2 torr) Features - Made in the USA - All models feature high visibility interior, cleanliness, safety, complete containment, portability and a draft-free atmopshere - All models are complete systems, nothing needs to be added except gas of choice: nitrogen, argon or other inert gases - Installed purging valves are ideal for lowering oxygen and humidity levels - Very useful when working with toxic substances, asbestos, fibers, sewage residue and harmful liquid vapors 35" Compact, completely sealed glove box with transfer chamber and flat access door for basic isolation and /or containment. INCLUDED: The Yamato SG-848 48 in. Three Glove Compact Glove Box includes: - Yamato SG-848 48 in. Three Glove Compact Glove Box - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heating thermostat from 20 to 100°C, with TFT color display and complete programming functions LAUDA (more) ECO stands out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - The circulation pump can be adjusted to six levels - Programmer with 150 temperature/time segments separable into 5 programs - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Temperature graphs on display - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface LAUDA tank thermostats are equipped as standard with a cooling coil. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. . Graph of the heating performance of the Silver and Gold thermostats in the models with transparent polycarbonate tank. Performance graph of the pump pressing on the six levels.

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Versatility of Applications Varied Standards: The set consists of 12 flat polygonal sheets and 17 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.