General laboratory equipment - other

The FlashGel system for fast RNA/DNA Electrophoresis. Lonza FlashGel Dock, for use with all FlashGel (more) Cassette types.

The NucliSens miniMAG system uses Boom technology (reference method) with magnetic silica for the ge (more)neric extraction of DNA and RNA in different specimens.

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters

LM 1869 Perkin Elmer DAD detector 135

The Sonics VC-375 is an ultrasonic generator which converts 50/60 Hz voltage to high frequency elect (more)rical energy. This alternating voltage is applied to disc-shaped ceramic piezoelectric crystals within the converter, causing them to expand and contract with each change of polarity. These high-frequency longitudinal mechanical vibrations are amplified by the probe (horn) and transmitted into the liquid as alternating high and low pressure waves. The pressure fluctuations cause the liquid molecule cohesive forces to break down, pulling apart the liquid and creating millions of micro-bubbles (cavities), which expand during the low pressure phases, and implode violently during the high pressure phases. As the bubbles collapse, millions of microscopic shock waves, micro jet streams, eddies and extremes in pressures and temperatures are generated at the implosion sites and propagated to the surrounding medium. Although this phenomenon, known as cavitation, lasts but a few microseconds, and the amount of energy released by each individual bubble is minimal, the cumulative amount of energy generated by the imploding cavities is extremely high and many times that generated in an ultrasonic bath. When used with environmentally safe aqueous cleaning solutions, the Vibra-Cell becomes a powerful cleaning tool, capable of removing the most tenacious contaminants from normally inaccessible locations. Unlike ultrasonic baths, which dissipate the vibrational energy over a large area, the Vibra-Cell probe focuses the energy to create a concentrated, high intensity cleaning zone. Probe horn not included.

The Packard Multiprobe II HT EX is a liquid robot handling flexible pipetting workstation for cherry (more) picking, dilutions, ADME/Tox, SPE, genomics and proteomics. 8-Tip Multiprobe II systems enable pipetting into tubes, vials and microplates. A variety of tips and dispensing options allow Multiprobe II systems to dispense volumes from 100 nL and up. Using VersaTip PLUS probe design, the Multiprobe II can switch between fixed and disposable tips in one assay. WinPREP software offers visual drag-and-drop simplicity for creating and optimizing protocols from simple assays to vacuum filtration protocols, MALDI spotting, device integrations and more.

Compact system utilizing pretreatment, RO, deionization, UVphoto oxidation and in-line microfiltrati (more)on technologies to produce CLRW (Clinical Laboratory Reagent Water) quality water to feed chemistry and immuno-diagnostic analyzers.

Weight filling Exclusive glass bottle

Including 2 cartridges and vacuum workstation.

Consisting of: 2x Pump P-500 1x LC Controler LCC-500 Used in good condition

LM2417 1x Phosphate Phosphate analyzer Aquacon IOTRONIC D–31832 Springl Aquacon PO 4 -20 Used fo (more)r one project

The B/R Mini-ProCycler™ is an ultracompact system, able to recycle Xylene, Xylene substitutes, Alcoh (more)ol and Formalin. The unit features a small foot-print (14 x 24 x 42”) and processes 2.1 gal. Batches. Recycling Times Xylene: 3 hours 95%-100% Alcohol: 4 hours 90% Alcohol 5.5 hours Formalin: 8 hours Specifications: Capacity: Up to 2.1 gallon batches (8 liters) Dimensions: 14″ x 24″ x 42″ (W x L x H) (35.6 x 61 x 106.7 cm) Electrical: 115V, 50/60 Hz @ 8 amps 230V, 50/60 Hz @ 4 amps Cooling: Air-cooled condenser Ventilation: No ventilation required

Average crossflow speed (in work mode): 0.45 m/s Average crossflow speed (in standby mode): 0.20 m/s (more) Airflow (work mode): 2150 m³/h ±10% Sound level: < 54 dBA Pre-filter (EN 779): G3 Horizontal HEPA filter: HEPA 18P7 Dimensions (WxDxH): 1900 x 890 x 1350 mm Interior dimensions (WxDxH): 1805 x 580 x 730 mm Height with support frame: 2082 mm Front aperture (WxH): 1800 x 730 mm Weight: 325 kg

Dimensions (HxWxD): 2735 x 1200 x 280 mm

Dimensions (HxWxD): 2730 x 2400 x 880 mm

Interfurn/ Plinth cabinet with sink/ L.Grey/1800x750x790

Printer NEC pinwriter p2X Pump: Eppendorf 5243

The equipment can be used for a wide array of quantitative imaging applications ranging from chemilu (more)minescence imaging, fluorescence imaging, gel, film and membrane imaging to culture and microplate-based assays. The equipment has an excellent image quality combined with an easy to use software features. It has a CCD camera with 1.92 Megapixel Resolution with a 12-bit Dynamic Range which is ideal for chemiluminescence, fluorescence and absorbance imaging. Including PC

Increase your lab’s efficiency with the variable speed Fisherbrand Tube Rovolver / Rotator. A small  (more)footprint, flexible design and simple display help increase flexibility and effectiveness. Speed Range: 10 to 40 rpm Capacity combination of 4 paddles of: 7 x 10 to 15 mL tubes 7 x 5 to 7 mL tubes 15 x 1.5 to 2 mL tubes 21 x 0.5 to 0.8 mL tubes One paddle of 6 x 50 mL tubes Dimensions (LxWxH): 154 x 225 x 195 mm Weight: 1.2 kg Includes: Two 10/15 mL paddles Two 5/7 mL paddles Two 1.5/2 mL paddles Two 0.5/0.8 mL paddles One 50mL paddle

The FlashGel System for fast electrophoresis of DNA is the ideal tool for quick screening of up to 3 (more)2 samples without having to plan your day around agarose gels. The FlashGel System contains all you need to quickly begin using FlashGel Cassettes. The FlashGel System is the fastest way to separate DNA and the best way to watch DNA migration as it happens. This revolutionary new tool separates DNA in 2 – 7 minutes. Monitor gel runs right at the bench, without UV light. The highly sensitive system allows a 5-20X reduction in DNA levels – saving both time and money. FlashGel Cassettes contain precast, prestained agarose gels and buffer – no need for gel preparation, buffer addition or gel staining. Consists of: FlashGel Dock FlashGel Camera FlashGel Power Supply

Mettler Toledo DV1020 interchangeable burette 20 mL 51107502 Rapid titrant change Automatic burette  (more)recognition via RFID with Titration Excellence Line Compliant with ISO 8655-3 Certifiable independently of burette drive Red protection tubing against light Replaceable PTFE valve disks Optional ceramic valve disks for cristallising titrants Replaceable high precision glass cylinder with serial number PTFE pistons with tripple lip seal assure good tightness Incl. 1x Brown Solvent Bottle 1L This unit is in excellent working condition and very clean cosmetically. It has been tested. Feel free to contact with any questions.

Diameter: 75 mm Suction nozzle diameter: 380 mm Dimensions: Connection piece: 370 mm Section 1: 250m (more)m Section 2: 550mm Section 3: 450mm Extraction nozzle section: 200 mm Including connector

Dimensions (WxD): 1500 x 600 mm

The 223 Sample Changer is an XYZ robot that can automate sample handling procedures. It is controlle (more)d via a program running on a computer. Dimensions (WxDxH): 535 x 437 x 60 mm Weight: 18.6 kg

Dimensions (WxDxH): 1500 x 700 x 940 mm

The QIAgility is a compact benchtop instrument that enables rapid, high-precision setup of PCR exper (more)iments with ready-to-use software for ease and convenience. The software provides step-by-step guidance for worktable setup and automatic calculation of all mixes, eliminating the need to program pipetting steps. Just select the kit and cycler, define your targets and start the run. For added flexibility the QIAgility is operated via a laptop computer. The instrument is highly suited for laboratories performing PCR and RT-PCR reactions with applications in: ​ Gene expression analysis Genotyping Cloning Pathogen detection Food and veterinary testing Pipetting head: Single channel Tip volume: 1 – 200 µl HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Table capacity: 6x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1x Master Mix Block 1x Reagent Block Precision: CV <1%, 5 – 200 µl (dry-well transfer) CV <5%, 2 – 5 µl (wet-well transfer) CV <10%, 1 µl UV lamp: Preinstalled UV lamp for worktable decontamination Dimensions (HxWxD): 450 x 540 x 630 mm Weight: 41 kg

Lab blenders are used in homogenizations during microbiological testing in food, cosmetic and pharma (more)ceutical labs. The 400 ml Masticator blender is meant to homogenize 10 to 40 g (previously diluted) samples. 400 ml bags with and without filters can be used, the former allow to ensure pipetting of debris-free homogenized liquid and are particularly recommended when homogenizations yield sample suspensions with high amounts of large-sized particles.

Digital time setting: 1 min – 24 hrs/non–stop (increment 1 min) Vertical rotation speed control rang (more)e: 1 – 100 rpm (increment 1 rpm) Vertical rotation movement: overhead, 360° Vertical rotation time setting range: 0 – 250 sec Maximum continuous operation time: 168 h Reciprocal rotation speed control range: 1 – 100 rpm (increment 1 rpm) Reciprocal rotation tilt angle range: 1° – 90° (increment 1°) Reciprocal rotation time setting range: 0 – 250 sec Vibro rotation tilt angle range: 0° – 5° (increment 1°) Vibro rotation Pause / Vibro time setting range: 0 – 5 sec Maximum load: 0.5 kg Overall dimensions (WxDxH): 365 x 195 x 155 mm Weight: 1.7 kg