Zeiss 456029 0.25x + 452996 Adapter 44 d=30mm Extension Tube Camera

The Luminex 100 System is a flexible analyzer based on the principles of flow cytometry that enables (more) you to multiplex (simultaneously measure) up to 100 analytes in a single microplate well, using very small samples. The system delivers fast and cost-effective bioassay results on many assay formats including nucleic acid assays, receptor-ligand assays, immunoassays, and enzymatic assays. The Luminex 100 System is the combination of three core xMAP Technologies. The first is xMAP microspheres, a family of fluorescently dyed micron-sized polystyrene microspheres that act as both the identifier and the solid surface to build the assay. The second is a flow cytometry-based instrument, the Luminex 100 analyzer, which integrates key xMAP detection components, such as lasers, optics, fluidics, and high-speed digital signal processors. The third component is the xPONENT Software, which is designed for protocol-based data acquisition with robust data regression analysis. Multiplexing: Up to 100 analytes per sample (80 on MagPlex microspheres) Dynamic Range (Typical): ≥3.5 logs Read Time: 96-well plate in ≤45 min (up to 12,800 tests/hour) Daily Start-Up/Shut-Down: ≤30 min

VACUUBRAND BVC Professional Fluid Aspiration System Ultimate Vacuum 150 mbar / 112 torr Maximum Pum (more)ping Speed 0.5 CFM at 60Hz Control Range 150 - 850 mbar Features - Non-contact sensor for electronic monitoring of the liquid level in the collection bottle. - Disinfection routine for the suction tubing for drawing in disinfectant after switching off the pump. - Self-closing quick couplings (as accessory to the BVC professional G) for convenient and safe bottle change, e.g., for work with biohazards. - For professional work and a perfect fit for required safety protocols. The BioChem-VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials. A non-contact sensor monitors the liquid level in the collection bottle electronically and prevents overfilling. A disinfection routine allows the suction of disinfectants through aspiration hand set and tubing after switching off the pump, and so supports demanding safety protocols. The BVC professional with 4l PP bottle with self-closing quick couplings minimizes risk in transporting hazardous waste and of contamination in the workplace. The version with coated 2l borosilicate glass bottle allows you to work with aggressive disinfectants like chlorine bleach. INCLUDED: The VACUUBRAND BVC Professional Fluid Aspiration System includes: - Chemistry Diaphragm Pump - 4L Collection Bottle - Adjustable Suction Power Control Panel - Non Contact Liquid Level Sensor - Quick Couplings (4l pp version) - Aspiration Hand Set VHC with Protection Filter - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

IKA MultiDrive control MT Package Speed Range 3000 - 20000 rpm Motor principle Brushless DC Weighing (more) range 5 - 4000g Features - Versatile crushing capabilities for hard, soft, or fibrous samples with a range of vessels for coarse and fine crushing - MultiDrive control unit also mixes, grinds, and includes a dispersion vessel and a disposable tube for diverse applications - Features a USB interface for convenient actuation and documentation - High performance with variable rotational speeds from 3000 rpm to 20,000 rpm and a powerful 1000 Watt output - Interval operation mode enhances coarse crushing and thorough blending with simple activation - Integrated cooling in the milling cup for indirect heat dissipation, keeping coolant and sample separate - User-friendly operation ensured by a clear TFT-display Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples. BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers. The plastic blending tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the blending tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery. MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation respectively. High performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output. Interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending. Integrated cooling in the milling cup, which allows indirect heat dissipation. Thus, coolant and sample remain separate. TFT-display guarantees user-friendly operation.Temperature measurement and vessel recognition using RFID. A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating. Weighing function is also integrated into the user-friendly workflow of the IKA MultiDrive control. Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required.INCLUDED: The IKA MultiDrive control MT Package includes: - 5 Spare Seals - IKA MultiDrive control - MultiDrive TC 1 Protective housing - MultiDrive MT 150.5 Milling tube, autoclavable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 022653083 Fixed Angle Rotor F-45-18-11-Kit with Lid The Eppendorf 022653083 Fixed Angle Ro (more)tor F-45-18-11-Kit with Lid for Miniprep Spin Column and 1.5/2.0 mL Tubes, 18-Places is for use with microcentrifuge models 5424. The rotor has a maximum rotational speed of 14,680 RPM, relative centrifugal force (rcf) of 18,111 x g, and is used for centrifugation of standard application lab samples. The rotor has an 18-place tube array that holds miniprep spin columns and 1.5 mL/2.0 mL tubes, and it comes with a lid that has an extra-high rim design to allow tube lids to remain open during centrifugation, preventing torn lids. This fixed-angle rotor is an accessory for use with Eppendorf centrifuge model 5424, which spins biological lab samples at high speeds to separate cellular material into component parts.

Microtip probes are available in tapered and stepped configurations and are designed to process samp (more)les contained in small diameter vessels at extremely high intensity (refer to chart for recommended volumes). Tapered microtips screw into standard 1/2" step horns with tapped ends. The double stepped microtip consists of a coupler and a stepped tip and screws directly into the converter. It has lower amplitude than the tapered tip, but is capable of reaching into small diameter vessels of greater depth and can process solutions down to 0.1 mL. Typical Applications: - Micro-tapered is recommended for processing spores, fungi, yeast, muscle, and connective tissue. - Double Stepped Microtip –is recommended for red and white blood cells, tissue culture cells, HELA cells, and cells which have a low to medium resistance to breakage. Attaches to converter only. For use with Branson SFX250, SFX550, 250 & 450 Sonifiers .Only attach Microtip to Disruptor horn; attach 2-piece. Double-step Microtip to converter only. Tip Diameter 1/8” (3mm) Intensity Ultra High Ampl. Range 116 - 494 Volume 0.25 – 10ml

This listing is for a Hettich EBA 12 Centrifuge. The unit is in full working condition and is ready (more) for immidate realese. The Hettich EBA 12 Centrifuge is a laboratory centrifuge designed for separating substances or mixtures with a maximum density of 1.2 kg/dm³. It is suitable for various applications, including serology, cell washing, and pelleting particles from suspension. Technical specifications Voltage: 220-240V, 50 / 60Hz Current: 2,2A Power: 350W Maximum speed: 18000 rpm Technical specifications rotor Rotor number: 1118 Maximum rotor speed: 5000 rpm Dimensions tubes (∅) x (H): 1.5 x 6.5 cm   External dimensions (W) x (D) x (H): 27 x 32 x 25 cm

Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303The Thermo Scientific Micro (more)plate Carriers for TX-1000 Rotor, Cat. #: 75007303 are for use with the Thermo Scientific TX-1000 Rotor. These adapters feature a capacity for 4 x 6mL Standard or 4 x 2mL Deep-Well Microplate. This is a four piece set, and the adapters are new in packaging. INCLUDED: The Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303 includes: - Four 75007303 Microplate Carriers - Full 6 Month Parts and Labor Warranty Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303 SpecificationsCapacity4 x 6mL Standard or 4 x 2 mL Deep-WellRotor CompatibilityThermo Scientific TX-1000 Rotors

Adam Equipment LBB 15001E Luna Precision Balance, 15000g, 0.1g Capacity 15000g Readability 0.1g Rep (more)eatability 0.2g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LBB 15001E Luna Precision Balance, 15000g, 0.1g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty