Wave Biotech CO2MIX20 CO2 Mixer

Labconco Liquid Nitrogen TrapForprocessing samples with ultra low eutectic points. Secondary Trap co (more)nnects inseries with a freeze dry system and vacuum pump to prevent contaminants frommigrating into the vacuum pump. After pulling a vacuum, liquid nitrogen may beintroduced via the liquid nitrogen port. Liquid nitrogen cools to -196C(-321F) to trap contaminants with low eutectic points. The well may bedefrosted and the liquid drained from the drain hose. Glacier whiteepoxy-coated steel construction. Two valves may be opened (trap) or closed(by-pass). Opened valves allow gaseous contaminants to be trapped in the liquidnitrogen well. Closed valves allow gaseous contaminants to by-pass the wellduring defrosting and draining. 3/4" OD inlet and outlet connections.Includes an insulated filler tube for connection to a user-supplied liquidnitrogen tank; 20" rubber tubing; 3/4" ID x 3/8" wall; and twoclamps. Liquid nitrogen is required (not included). INCLUDED: The Labconco 7394800 Liquid Nitrogen Trap includes: - Insulated Filler Tube - Clamps x 2 - 20" Rubber Tubing (3/4" ID x 3/8" Wall) - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Julabo FT400 Immersion Cooler, 115V/60Hz (NRTL Certified) Working Temperature Range -40°C to 30°C R (more)efrigerant R449A Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT400 Immersion Cooler, 115V/60Hz (NRTL Certified) includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036110237 Hei-PLATE Mix 'n' Heat Expert Advanced Sensor Package, 135mm Plate Temperature Ra (more)nge 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 135 mm. This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110237 Hei-PLATE Mix 'n' Heat Expert Advanced Sensor Package, 135mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Expert (135 mm diameter) - Pt1000 Temperature Sensor - Pt1000 Holder with Cable Device - Silicone protective Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

Bio-Rad offers a range of mini horizontal electrophoresis chambers to resolve DNA fragments on eithe (more)r handcast agarose gels or ReadyAgarose precast gels. These cells include a buffer tank, safety lid with cables, and leveling bubble. Fast and flexible, the Mini-Sub cell GT cell is our most popular classroom gel box. The Mini-Sub cell GT cell holds either a 7 x 7 cm or a 7 x 10 cm gel tray. A 10 cm agarose gel poured with two 8-well combs easily accommodates two student teams at a time. At 100 V, this cell resolves DNA fragments from 20–20,000 base pairs in just under 30 min. Gel tray sizes (OD) (WxL): 70 x 70 mm ReadyAgarose gels accommodated: Yes, mini format Sample throughput: 8–30 Base buffer volume: ~270 ml Buffer recirculation: No Bromophenol blue migration: 4.5 cm/hr (at 75 V) Dimensions (WxLxH): 120 x 260 x 65 mm Weight: 1 kg

The fraction collector collects fractions from ÄKTA pure purification runs. The fraction collector c (more)an be used for: • Fixed volume fractionation • Peak fractionation • Combined fixed volume fractionation and peak fractionation Fraction collector F9-C has the following functions for reducing sample spill during fractionation: • Drop Sync • Accumulator Fraction collector tubes and bottles Tube or bottle size: 3 mL: Diameter (min/max) – 10.5/11.5 mm, Height (min/max) – 50/56 mm 5 mL: Diameter (min/max) – 10.5/12 mm, Height (min/max) – 70/76 mm 8 mL: Diameter (min/max) – 12/13.3 mm, Height (min/max) – 96/102 mm 15 mL: Diameter (min/max) – 16/17 mm, Height (min/max) – 114/120 mm 50 mL: Diameter (min/max) – 28/30 mm, Height (min/max) – 110/116 mm 250 mL bottle: Diameter (min/max) – (LxW) 55 x 55/64.5 x 64 mm, Height (max) – 121 mm Deep well plates: No. of wells: 24, 48, or 96 Shape of wells: Square, not cylindrical Well volume: 10, 5, or 2 ml

The Malvern Panalytical NanoSight NS500 instrument provides an easy-to-use, reproducible platform fo (more)r nanoparticle characterization. The NS500 provides detailed and intuitive analysis of the size distribution and concentration of all types of nanoparticles from 10nm to 2000nm in diameter, depending on the instrument configuration and sample type being analyzed. Single particle zeta potential measurements on the NS500 provide inherent high resolution zeta distributions which can be measured simultaneously with other NTA measurements parameters like size, particle concentration and can even operate whilst in fluorescence mode. Light source: 405nm (violet), 488nm (blue), 532nm (green) or 642nm (red) Size range: 10 nm – 1000 nm Particle concentration: 10⁶ to 10⁹ particles/mL Minimum sample volume: 250 μL Dimensions (WxDxH): 530 x 250 x 400 mm

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).