Thermo Micro Writer Slide Microwriter A81700103 Raymond A Lamb

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This revolutionary training arm provides complete venous access for IV therapy and phlebotomy, plus  (more)sites for intramuscular and intradermal injections. An extensive 8-line vascular system allows students to practice venipuncture at all primary and secondary locations, including starting IVs and introducing Over the Needle IV Catheters. The venous system simplifies setup with only one external fluid bag supplying artificial blood to all veins simultaneously. The dorsal surface of the hand includes injectable metacarpal, digital, and thumb veins. The antecubital fossa includes the median cephalic, median basilic, and median cubital veins. Venipuncture can also be performed along the basilic, cephalic, accessory cephalic, and median antebrachial veins. Intramuscular injections may be performed in the deltoid muscle and intradermal injection sites are located in the upper arm. Intramuscular injections into the deltoid muscle are enhanced by the soft, lifelike skin and by the natural bony landmarks in the region. Intradermal injections using distilled water will create characteristic skin welts at designated sites on the upper arm. The realism of the Life/form® Advanced Venipuncture and Injection Arm is truly amazing. The soft, flexible fingers are molded separately with extreme attention paid to every detail – right down to the fingerprints! Flexion of the wrist helps students develop manipulation skills. The replaceable skin rolls as the veins are palpated, and a discernible pop is felt when entering the veins. The Life/form® molding process reproduces the fine details of the skin to make the arm look and feel alive. Valves in the veins can be seen and palpated on the skin surface. Simulated veins and skin are completely replaceable to keep this training arm looking and working like new. Under normal use, hundreds of injections may be performed before the veins or skin need to be replaced. Complete replacement kits are available and easy to use. To extend the life of the veins, an aerosol sealant is available to seal punctures and prevent leakage.Includes 2 uarts of simulated blood, 3 cc syringe, 12 cc syringe, needle, two fluid bags, instruction manual, and soft carry case.

Dimensions (WxHxD): 600 x 470 x 500 mm

Scilogex Fixed Angle Rotor 50mL x 8 The Scilogex Fixed Angle Rotor 50mL x 8 has the capacity to acco (more)modate 8 x 50mL tubes and can a reach maximum speed of 5,000RPM. For use with the DM0636 centrifuge. INCLUDED: The Scilogex Fixed Angle Rotor 50mL x 8 includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-VAP Expert Control ML/G3B Coated Motor Lift w/ G3 Vertical GlasswareThe Hei-VAP Series  (more)of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control ML/G3B Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - G3B Vertical Glassware - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC was removed from a university lab where it was surplus t (more)o requirements. The unit powers up but shows the following error. M26 - LAMP COOLING BLOWER FAILURE.The manual states: 1. The blower is bad.2. The blower relay is bad.3. The airflow switch is bad. We have been advised that the system is missing some essential parts. These parts are available from the manufacturer. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs due to the error.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

IKA ULTRA-TURRAX Tube Drive Speed Range 400 to 8,000 RPM Viscosity max. 5000 mPas Speed deviation 3% (more) Features - Features a powerful motor for unparalleled stirring, dispersing, grinding, and homogenization results - Specifically designed for safe processing of infectious, toxic, or odor-intensive samples - Utilizes sealable disposable tubes to minimize cleaning and prevent cross-contamination - Allows programmable test conditions for time, energy, and volume with memory for frequently used parameters - Adjustable rotation direction set through a clear, multilingual menu for flexible operation - Turbo button enables intensive mixing with speeds up to 8,000 rpm for demanding tasks - Speed range from 400 to 8,000 rpm, catering to a wide array of processes - Handles viscosity up to 5000 mPas, suitable for thick samples - Offers speed adjustment in 10 RPM steps for fine control - Compatible with a voltage range of 100 - 240 V and frequency of 50/60 Hz The new IKA UTTD power control disperser gets its name from an even more powerful motor. The disperser assures the best stirring, dispersing, grinding, and homogenization results and has been devised in particular for the safe processing of infectious, toxic or odor-intensive samples. Disposable tubes The sealable disposable tubes have been optimized for your application. They reduce the amount of cleaning required and rule out any risk of cross-contamination. Programmable test conditions Time, energy, volume: You specify and systematically program the test conditions and store frequently used parameters in your library. Adjustable change in direction of rotation When, and how often, the direction of rotation should be changed is very easily set using the clear and multilingual menu.Turbo button Even more intensive mixing, dispersing or grinding at your fingertips: All of this is achieved with the turbo button. Over short periods, rotational speeds of up to 8,000 rpm can be achieved. INCLUDED: The IKA ULTRA-TURRAX Tube Drive includes: - ULTRA-TURRAX® Tube Drive P control - ST-20 Stirring tube, 20 ml (3 pcs.) - DT-20 Dispersing tube, 20 ml - Glass balls (6.0 mm) for BMT tubes - Stainless steel (5.0 mm) balls for BMT tubes - Removal hook - Plastic hose for drainage - USB A-B Cable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA KS 3000ic Incubator Shaker Type of Movement Orbital Temperature Setting Range 12°C - 80 °C Speed (more) Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly This advanced incubator shaker combines innovative design with precise temperature control, allowing for unattended operation in your lab. Featuring orbital movement with a 20 mm stroke and a shaking capacity of 7.5 kg, it offers a speed range of 10 to 500 rpm, displayed on an LED screen. The integrated timer ranges from 1 second to 59940 minutes, supporting both continuous and timed operations. With a heating range of 12°C to 80°C and a 50-liter chamber, this unit ensures accurate and stable temperature control, making it perfect for a variety of laboratory applications. INCLUDED: The IKA KS 3000ic Incubator Shaker includes: - KS 3000 ic control - PT 1000.80 Temperature sensor, stainless steel - Clamping screws short (4 pcs.) - PC 1.1 Cable - USB A-B Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA KS 3000ic Incubator Shaker SpecificationsType of movementorbitalShaking stroke20 mmPermissible shaking weight (incl. attachment)7.5 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)10 rpmSpeed range10 - 500 rpm Speed display LED Speed deviation 1 %Speed control1 RPM stepsTimeryesTimer display7 segment LEDTime setting min.1 sTime setting range1 - 59940 minOperating modetimer and continuous operationHeat output1000 WSet temperature resolution0.1 ±KControl accuracy with sensor (1 vessel 0.5 L H2O, RT 22°C, T=37°C)0.5 ±KTemperature displayyesTemp. stability (0,2l H2O; RT 25°C, T=37°C)0.1 ±KTemperature range (inlet T>3°C)12 - 80 °COperating area inner chamber330 x 330 x 258 mmTotal volume inner chamber50 lRaw material housingSheet metal powder coatRaw material hoodPMMARaw material front foilpolyesterRaw material front panelABS paintedTemperature stability (1 vessel 0.5 L, RT 25°C, T=37°C)0.05 ±KTemperature homogenity (5 vessel 0.5 L; RT 25°C, T=37°C)0.5 ±KHeight with open hood875 mmDimensions (W x H x D)465 x 430 x 695 mmWeight37 kgPermissible ambient temperature15 - 32 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 30RS 232 interfaceyesUSB interfaceyesVoltage230 / 115 / 100 VFrequency50/60 HzPower input1120 WComparison of ModelsSpecificationIKA KS 3000iIKA KS 3000icIKA KS 4000iIKA KS 4000icShaking Stroke20 mm20 mm20 mm20 mmPermissible Shaking Weight (incl. attachment)7.5 kg7.5 kg20 kg20 kgMotor Rating Input45 W45 W82 W82 WSpeed Range10 - 500 rpm10 - 500 rpm10 - 500 rpm10 - 500 rpmSpeed Deviation0.010.015 ±rpm5 ±rpmTimerYesYesYesYesTime Setting Range1 - 59940 min1 - 59940 minNot specifiedNot specified.comparison-table tr td:nth-child(3) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote