Stainless steel floor scale capacity 3.000 Kg VE Ohaus

Agilent / Keysight DigRF v4 N2X N5540A + N5344A Analyzer Module + N5346A Cable

Manufacturer: Agilent / Keysight Model: N2X Chassis N5540A + N5344A DigRF Analyzer Module for DigRF (more)v4 + N5346A High Performance Flying Leads Probe for DigRF v4 P/N: MY48424304 NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE. N2X Chassis N5540A 2-slot Portable Chassis: The chassis provides a convenient platform for testing scenarios where portability or small size is a factor. Two different card types can be configured simultaneously allowing for test scenarios that use a combination of port types. • Hot-swappable test cards• Multi-user, remotely accessible• Support for SONET/SDH, POS, ATM, Ethernet, FR and Fibre Channel interfaces• Capable of daisy-chaining up to 60 chassis, time synchronized to 10 ns• Hundreds of test ports available in one system• Completely backward compatible with existing RouterTester 900, OmniBER XM and SAN Tester hardware and software N5344A DigRF Analyzer Module for DigRF v4: The Keysight N5344A DigRF exerciser module belongs to the Keysight RDX family. The module transparently monitors DigRF v4 bus activity, helping digital and RF engineers integrate and troubleshoot devices incorporating the DigRF digital serial bus across a wide variety of over the air standards. The analyzer module allows engineers to work in the domain (Digital or RF) of their choice to quickly characterize the DUT´s digital and wireless behavior. It operates in conjunction with Keysight vector signal analysis software. Key Features & Specifications: • Support DigRF v4 bus specifications• Support speeds up to 3Gb/s, with single or multi-lane configuration• Full protocol decoding capabilities• Extracts and transfers digital IQ for analysis with 89600B VSA software Analyzer features and operation: • Simultaneously acquires Tx/Rx bidirectional traffic• Tracks changes across all speed modes – sleep, low power and high speed• Displays data and control packets at the protocol level• Triggers on protocol-specific packets, specific bits within a packet, and protocol violations N5346A High Performance Flying Leads Probe for DigRF v4: The DigRF Flying Leads probe makes it possible to access DigRF links with no integrated connectors, at rates up to 3Gb/s. With very low capacity loading, the probe enables you to monitor the DigRF protocol in space constraint designs, without influencing the monitored signals. Key Features & Specifications: • Low capacity loading, enables insight without influencing the monitored signals• The probe amplifier is outside of the probe tip, ensuring the probe tip size is kept to a minimum to address space restraints and also thermal concerns• The probe can be used with single lane or multilane bus configurations• Both Tx and Rx lines can be probed with a single N5346A flying lead set.• Keysight provides a unique probe portfolio for DigRF bus standards, including the Soft touch probe and Flying leads probe NOTICE: THE SOFTWARE IN THE PRODUCT REQUIRES A LICENCE KEY TO OPERATE - THE KEY FOR N5344A HAS BEEN PRE-INSTALLED ON THE UNIT ANDITS READY TO USE. Items delivered: - N2X Chassis N5540A 2-slot Portable Chassis- N5344A DigRF Analyzer Module- N5346A High Performance Flying Leads Probe- Power Cord The whole system is in good cosmetic condition and is 100% functionl tested. Ready for your use.

€1,500.00 ex VAT

€1,785.00 incl. VAT if applicable

Brandnew! Beckman Coulter Rotor JA 10 6 x 500 mL, 10,000 rpm, 17,700 x g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€5,000.00 ex VAT

€5,950.00 incl. VAT if applicable

Mettler Toledo IND429 Scale

Capacity: 60 kg Readability (0 – 30 kg): 10 g Readability (30 – 60 kg): 20 g Weighing platform made (more)from HPL Weighing platform (WxD): 820 x 630 mm

€449.00 ex VAT

Engelsmann STAV 2003 Jolting Volumeter

The apparatus is used for the investigation of jolting volume and jolting density according to DIN I (more)SO 787 Part 11 and ASTM B 527-70. The possibility of using measuring cylinders of 100, 250, 500, 1000 mL opens a wide range of industrial application for this kind of equipment. Investigation of powdery, fibrous and granulate shaped products can be performed. Speed of camshaft: 250 rpm ± 15 rpm Dropping height of guide punch: 3 mm ± 0.1 mm Dimensions of folding box: 460 x 360 x 400 mm Weight: 9 kg Including 2x 250 mL cylinder

€949.00 ex VAT

Eppendorf 5920748009 Set of 2 Adapter for 7x50ml Conical Falcon Tube (S-4x groß)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€300.00 ex VAT

€357.00 incl. VAT if applicable

Eaton Singer Ailtech Stoddart NM-37/57 EMI/Field Intensity Meter 1000MHz 140dB

People are watching right now:

Manufacturer: SINGER / EATON Corp. Model: NM 37/57 SL-A S/N: 180 Description: The NM-37/57 (Ailtech, (more) Singer, Stoddart) EMI/Field Measuring Receiver (Field Intensity Meter) performs manual or programmable EMI emission measurements from 30 MHz to 1000 MHz. Four switchable bandwidths: 10 kHz, 100kHz, 1 MHz It incorporates an internal solid-state impulse generator as calibration source. Easy-to-read 60 dB meter scale and 80 dB attenuator (5 steps). Overall measurement range: 140 dB (0.1 µV to 1.0 V) Mains operation as well as internal or external battery operation. Detector Functions: - Field intensity - Quasi peak- Peak - Slideback peak Items delivered: - EATON NM 37/57 - Power Cord The instrument is in used cosmetic conditiond and 100% functional tested. Hersteller: SINGER / EATON Corp. Modell: NM 37/57 SL-A S/N: 180 Beschreibung: Der NM-37/57 (Ailtech, Singer, Stoddart) Störmessempfänger (FeldstärkeMessgerät) bietet einen Frequenzbereich von 30 MHz bis 1000 MHz. Der Messbereich ist unterteilt in 8 Bereiche. 3 umschaltbare Bandbreiten: 10 kHz, 100kHz, 1 MHz Pegelbereich: 140 dB (0,1 µV- 1V) Leicht ablesbare 60 dB-Skala und 80 dB-Abschwächer (5 Stufen). Eingebauter Kalibrator Bandüberwachung im Wobbelbetrieb - Ausgabe auf XY-Schreiber möglich. Netz- oder Batteriebetrieb (eingebaute Akkus) oder externe Batterie. Betriebsarten: - Feldstärke - Quasi Peak - exponentielles Abklingverhalten - Peak - RMS - Slideback peak - manuelle Kompensation Lieferumfang: - EATON NM 37/57 - Stromkabel

€500.00 ex VAT

€595.00 incl. VAT if applicable

Cooled Incubator SMART ST6 POL-EKO

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

€2,554.55 ex VAT

€3,039.91 incl. VAT if applicable

Italy

Interfurn Door Lower Cabinet

Dimensions (WxDxH): 600 x 490 x 430 mm

€87.50 ex VAT

Dynex DSX Automated ELISA System

The DYNEX DSX Automated ELISA System is a proven, fully- automated open system with a unique dispens (more)e synchronization that helps eliminate plate drift and achieve consistent results across four independent plate incubators. This helps to manage testing workload with reduced labor and walkaway capability to maximize lab personnel effciency. System: Reader:

€4,999.00 ex VAT

GE Cytiva 56-3105-64 Inlet Tubing

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€200.00 ex VAT

€238.00 incl. VAT if applicable

ELEMENTAR Vario Max analyzer for parts

ELEMENTAR Vario Max analyzer for parts Year of manufacture: 2014 For parts

France