Scout SKX422 Ohaus

Made of fabric, protects device housing against dust, dirt, etc.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

Additional WD-4/8 LCD display has been designed to connect PUE C315 indicator. The display is equipp (more)ed with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

Additional WD-4/4 LCD display has been designed to connect with PUE 7 indicator via D-SUB 15 connect (more)or (male plug). The display is equipped with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

Radwag Laboratory Holders have been designed for faster and more convenient weighing. They ensure pe (more)rfect and secure fixing of small vessels, both typical and non-standard shapes. Product highlights: Full ergonomics of weighing Direct dosing of a sample into a vessel High work efficiency, lower costs ( minimizing possible loss of samples resulting from moving) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory Holders are compatible with all Radwag analytical balances. Intended use: round flasks - 50, 100 and 250 ml

The combination of 10x and 20x high grade wide field eyepieces with the 2x and 4x occulars make poss (more)ible the range of 20x to 80x magnification. Magnification Power: 20 → 80X Illuminated: Yes Illumination Type: Halogen Battery Operated: Yes Battery Type: 3 x AA Weight: 2.3kg Dimensions: 139 x 200mm

Buchi Distillation Chiller B-741 Lab This item was removed from a university where it was surplus to (more) requirement. It powers on but is in poor cosmetic condition, we are unable to test it further at our facility. The unit is sold for spares/repairs as we believe it will need quite a bit of remedial action to get it working properly. It is missing one of is feet.

Lambda Omnicoll Franction Collector - Sampler This was removed from a university lab where it was su (more)rplus to requirements. The unit is missing a few parts and we were unable to power it on. For this reason it is sold for spares/repairs. Rack holds 90 x 5ml

Memmert ICO105 CO2 Incubator 107L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 107L (3.8 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO105 CO2 Incubator 107L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO105 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO105 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO105 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO105 CO2 Incubator 107L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA Pette multi 12 x 10 - 100 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 10 - 100 µl includes: - Two Year Manufacturer's Warranty

IKA Ministar 20 Control Overhead Stirrer Speed Range 0/50 to 2,000 RPM Viscosity Max. 10,000 mPas S (more)tirring Quantity Max. 15 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 10,000 mPas and volumes of up to 15 l - Continuously adjustable speed between 0/30 – 2,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself: Click Here to View Product Video INCLUDED: The IKA Ministar 20 Control Overhead Stirrer includes: - MINISTAR 20 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - Chuck Key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 20 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)15 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLCDSpeed range0/50 - 2000 rpmViscosity max.10000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft20 Ncm Speed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm3 ±%Stirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.2 NmTorque measurementtrendDeviation of torque measurement I3 ±NcmTimeryesTimer displayLCDTime setting range0 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)70 x 193 x 154 mmWeight1.56 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote