Memmert ICO105 CO2 Incubator 107L, 115V

This Sanyo CO2 Incubator Double Stack MCO-17AI MCO-18AIC (UV)was removed from a university lab where (more) it was surplus to requirements. Both units have been tested with and CO2 and temperature sensor and are in good working order. They will require calibration upon installation. They are in good cosmetic condition with minor marks from use. Top:-Model - MCO-17AISN - 60301691External dimensions - L70 W63 H90cmInternal dimensions - L50 W48 H66cm3 Shelves - 45 x 45cmNet Weight - 91kg Bottom:-Model - MCO-18AIC (UV)SN - 31112791External dimensions - L71 W64 H91cmInternal dimensions - L51 W48 H66cm3 Shelves - 45 x 45cmNet Weight - 93kg

This Heraeus HERAcell 150 CO2 Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirement. The unit has been professionally serviced and is in good working order. A report is available on request. It is in good cosmetic condition with minor marks.

Glas-Col Unit Pulse Platform Incubator This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and has been tested with a digital thermometer (not included). Ran at full RPM(1200) with no issue. It is in good cosmetic condition internally and externally.

Thermo Scientific Cytomat 24 C Lab This item was removed from a university where it was surplus to r (more)equirement. The unit has been professionally serviced and is in full working order. The service report is available on request. This item also includes the following: 1 x Operating instructions1 x Software Documentation

Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range A (more)mbient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V provides precise temperature control across a wide working range of 0°C (at least 20°C below ambient) to +70°C, making it ideal for various incubation applications. With a spacious 53-liter capacity, this incubator uses an energy-efficient Peltier heating and cooling system, featuring individually controlled upper and lower elements for optimal temperature uniformity. The advanced ControlCOCKPIT with TwinDISPLAY, coupled with an adaptive digital PID-microprocessor controller, enables intuitive operation and monitoring through high-definition TFT displays. The SetpointWAIT function ensures that process timing only begins once the set temperature is reached, providing additional accuracy. Constructed with a corrosion-resistant stainless steel interior and textured exterior, the IPP55plus is designed for durability and easy maintenance. Safety features include an over- and undertemperature monitor with AutoSAFETY protection, providing visual and acoustic alarms if limits are breached. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault analysis, and a maximum chamber load capacity of 176 lbs, make this incubator both versatile and reliable for demanding lab environments. INCLUDED: The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Proline heating thermostat with tank Proline clear-view LAUDA thermostats have been designed for dir (more)ect observation of objects. They are ideal for use with LAUDA Scientific PVS or iVisc automatic viscometer, as the necessary temperature stability for precise viscosity determination is ensured over the entire temperature range. In addition, the two-chamber principle always guarantees a constant liquid level in the measuring chamber, regardless of the volume and temperature of the medium. PVL models with five layers of insulating glass are suitable for low temperature measurements down to -40° or -60°C when a low temperature chiller or thermostat is connected. These thermostats are available with two different control units. The Master version is designed for all applications where the parameters are not changed very often. The removable Command operating unit (PV C models) incorporates a graphic LCD screen for high operating convenience and a programmer. Notable features - LAUDA Vario Flex pump (pressure pump) with eight selectable power levels - Cooling coil fitted as standard with connection for additional cooler Accessories included Fittings for pump connection, cooling coil Specific features of the Proline PV 24 model - Tank volume min. 19 L - Tank volume max. 24 L - Tank opening 405 x 135 mm - Bowl depth 320 mm - Usable depth 285 mm - Upper height of the tank 390 mm - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Water-cooled temperature range from 20°C to 230°C - Operating temperature range from -30°C to 230°C - Pump connectors M16 x 1 - Fitting 13 Ø

VACUUBRAND DVR 2pro Vacuum Gauge Upper Measuring Limit 1060 mbar/hPa (795 torr) Lower Measuring Lim (more)it 1 mbar/hPa (1 torr) Vacuum Sensors Integrated Features - Improved functionality within the navigation menu helps to save energy and to increase the life cycle of the battery - Large, graphical analog display with digital measuring values alows to detect tendencies and makes it easier to readout precisely - Pressure unit user-selectable in mbar, hPa or Torr prevents unnecessary conversions - Different vacuum connections and the additional support rod allow the use in almost every laboratory application - Chemical resistant materials for wetted parts together with the capacitive ceramic diaphragm pressure sensor provide excellent long-term stability and accuracy The DVR 2pro is a fully electronic, versatile vacuum gauge for the measuring range from atmospheric pressure to 1 mbar. All wetted parts are made from enhanced chemical resistant material which allows the use under very rough laboratory conditions. The high accuracy and the large graphical display from the DVR 2 have also been carried forward for the “pro” version. One of the main enhancements is the power supply with a normal 9 V Alkaline battery. The new battery slot at the back of the gauge allows for easy replacement of the battery. A wider range of connection parts provide a great range of connection flexibility for laboratory use.INCLUDED: The VACUUBRAND DVR 2pro Vacuum Gauge includes: - 9V Alkali-Manganese Battery - Support Rod and Connecting Parts - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark LC-8 3500 Centrifuge Benchmark’s LC-8 series of laboratory centrifuges is uniquely designe (more)d to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning. The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode. To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected. INCLUDED: The Benchmark LC-8 3500 Centrifuge includes: - 8 x 15ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris SmartReader 96 Microplate Absorbance Reader with Incubation - PC Software IncludedFeatures - (more) For ELISA Testing - Intuitive, 7 inch color touch screen control panel - Filter based system with wavelength range from 340 to 750nm - Operates as a stand alone system, with USB flash drive drive for data transfer - Absorbance range: 0.0 to 4.000 Abs - 8 channel vertical optical path, with zero dispersion - Integrated, multi-speed plate shaker - Temperature controlled plate incubation Plate absorbance results are easily visible on the reading result screen and conveniently placed in grid format for quicker readability. The plate layout interface allows for quick and intuitive set up of a plate’s well contents. The display shows a graphical representation of the 96 well plate, and the user can label each well as required. Measurement data is available immediately on the screen after a reading, as well as interpretations, calculated analysis and curve fittings. The SmartReader 96 comes complete with 4 popular filters: 405,450,492,630nm and twenty six additional filters are available separately to cover a full range from 340 to 750nm. The integrated filter wheel allows up to 8 filters to be loaded at once, and filters can be selected during programming. Use the touch screen, or connect a mouse for programming and operation. The menu interface allows the user to choose the wavelength filter, set shaking parameters, enter details of the plate layout, and also choose the details for the reading protocol and data calculations.Model MR9600-T offers precise temperature control for incubation of plates during processing. Temperature can be maintained at 5°C above ambient to 50°C. Up to two filters can be used for 2 measurements of the sample plate, for calculated comparisons. Kinetic calculations can be performed by setting multiple readings. The SmartReader 96 is a convenient stand alone reader, all software and the programing system is incorporated into the electronics. However, a convenient USB port on the side allows quick and easy saving of data files to a USB drive, and the universal .csv files can then be shared or transferred to a computer for storage or further processing. A data port can be used for connecting a computer or basic printer.