Scilogex MicroPette Pipettor, 5-50µl

Thermo Scientific 75003424 Fixed Angle Rotor The Thermo Scientific 75003424 Fixed Angle Rotor, is a  (more)centrifuge rotor designed for use with the Thermo Scientific™ MicroCL 17/17R and 21/21R Microcentrifuge Series centrifuges. This rotor has a maximum speed of 14,800 RPM and a maximum relative centrifugal force (RCF) of 21,100 x g. It can accommodate a maximum capacity of up to 24 x 1.5mL microtubes, making it suitable for low sample volume biological applications. INCLUDED: The Thermo Scientific 75003424 Fixed Angle Rotor includes: - 75003424 Fixed Angle Rotor - Click Seal Biocontainment Lid - 6 Months Parts and Labor Warranty Thermo Scientific 75003424 Fixed Angle Rotor SpecificationsMaximum Speed14,800 RPMMaximum RCF21,100 x gMaximum Capacity24 x 1.5mL micro tubesMaximum Radius8.6 cmMinumum Radius5.1 cmCentrifuge CompatibilityThermo Scientific™ MicroCL 17/17R and 21/21R MicrocentrifugesDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .downloads-section { justify-content: center; }

Polyscience P80NHA101B IP-80 Immersion Probe Cooler, 1.75 Rigid Coil Probe, -80 to -40C, 120V, 60Hz3 (more)D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P80NHA101B IP-80 Immersion Probe Cooler, -80°C to -40°C, 215W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Polyscience AP28P100-A11B 28L Polycarbonate Open Bath, Advanced Programmable (Ambient +10 to 85C), 1 (more)20V, 60HzThe Polyscience AP28P100-A11B 28L Polycabonate Open Bath is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications. Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP28P100-A11B 28L Polycarbonate Open Bath, Advanced Programmable (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED Objectives S-A (more)PO (Fluor) 4X, 10X, 20X, 40X, 100X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Equipped with a 6-channel turret and high-powered LUMOS LED for superior fluorescence illumination. - Delivers high color fidelity and resolution with a 23mm FOV. - Features Plan UC Fluor objectives for ultra-flat, high-contrast imaging, ideal for UV-Visible fluorescence. - Includes two empty filter cubes for customizable application needs. - Allows precise focus adjustment for both eyepieces. - 4X to 100X, accommodating various magnification needs. - LUMOS FL LED provides over 20,000 hours of operation. The Motic PA53 FS6 EDF is a high-end fluorescence life-sciences trinocular microscope equipped with a 6-channel fluorescence turret, featuring pre-mounted DAPI, FITC, and TRITC filter cubes, plus two user-configurable empty filter cubes. Its superior optics deliver high color fidelity and resolution, with a 23mm field of view. The PA53 FS6 EDF boasts a reflective fluorescence illumination system with a powerful LUMOS LED and a transmitted 100W Halogen light source. INCLUDED: The Motic PA53 FS6 EDF Trinocular Upright Biomedical Microscope w/ LUMOS Fluorescence LED includes: - S-APO (Fluor) 5X, 10X, 20X, 50x, & 100X Objectives - Motic Fluorescence Imaging Software Plug-In - Motic Images Plus 3.0 Software - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Ci3000+ Weather-Ometer with its advanced digital control systems, represent monumental achieveme (more)nts in applying digital and optical technologies in easy-to-use laboratory weathering instrument. The 3000 Series is approved by many OEMs in the textiles, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The 3000 Series has been certified CE, UL, CSA, ISO and EN compliant. 4500 W water-cooled xenon arc lamp Total exposure area of 2,188 cm2 TFT full color 12″ touch screen control panel display of all test parameters Direct setting and control of Black Panel Temperature, uninsulated (BPT) or insulated (BST) Direct setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods Space for 12 custom programs, sub-cycle capability SmartDamper to reduce test variability in chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor verifies that correct light capsule is installed Chamber viewing window in door Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure VibraSonic Humidification System Calibrated xenon reference lamp Water purity indicator Standards: AATCC TM16-2004: Colorfastness to Light AATCC TM 16.3 (2014): Colorfastness to Light, Xenon-Arc AATCC TM169: Weather Resistance of Textiles: Xenon Lamp Exposure ASTM C1442: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus ASTM D2565: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications ASTM D3424: Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter ASTM D4303: Standard Test Methods for Lightfastness of Pigments Used in Artist Paints ASTM D4355: Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water ASTM D4459: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications ASTM D4798: Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) ASTM D5071: Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus ASTM D6551: Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus ASTM D6695: Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings ASTM D7869: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings ASTM D904: Standard Practice for Exposure of Adhesive Specimens to Artificial Light ASTM G151: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources ASTM G155: Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials GME 60292: Designation of Colour Fastness and Resistance to Artificial Light IEC 60068-2-5: Environmental testing – Part 2-5: Tests – Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering ISO 105-B02: Textiles – Tests for colour fastness – Part B02: Colour fastness to artificial light: Xenon arc fading lamp test ISO 105-B04: Textiles – Tests for colour fastness – Part B04: Colour fastness to weathering: Xenon arc test ISO 105-B07: Textiles – Tests for Colour Fastness – Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration ISO 105-B10: Textiles – Tests for colour fastness – Part B10: Artificial weathering – Exposure to filtered xenon-arc radiation ISO 12040: Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light ISO 16474-1: Paints and varnishes – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 16474-2: Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps ISO 18909: Photography – Processed photographic colour films and paper prints – Methods for measuring image stability ISO 18930: Imaging materials – Pictorial colour reflection prints – Methods for evaluating image stability under outdoor conditions ISO 18937: Imaging materials – Photographic reflection prints – Methods for measuring indoor light stability ISO 3917: Road vehicles – Safety glazing materials – Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering ISO 4892-1: Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 4892-2: Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc sources JASO M346: Light-exposure test method by xenon-arc lamp for automotive interior part MIL-STD 810F: Environmental engineering considerations and laboratory tests – Part 2: Laboratory test methods – 505.4: Solar radiation (Sunshine) Peugeot Citroen (PSA) D47 1431: Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures SAE J2412: Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus SAE J2527: Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus VDA 75202: Automotive interior materials – Colorfastness and ageing test against light at high temperatures: Xenon arc VW PV 1303: Non-metallic materials – Lightfastness test for interior parts VW PV 3929: Non-Metallic Materials – Weather Ageing in Dry, Hot Climate VW PV 3930: Non-Metallic Materials – Weathering in Moist, Hot Climate

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW