Schott DURAN Dimroth-Kühler NS 29/32 400mm 242548205

Vial Capacity: 27 standard Gilson rack Liquid Flow Rate: From 0.01 to 120 ml/min, continuously. Liqu (more)id-contact Materials: 316L stainless steel or titanium, FEP, PTFE, PEEK, and PP. Sample Cross-contamination: Lower than 1 ppm, with liquid level detector and recommended values for rinsing parameters (4 mm immersion, 20 ml/min., 1 ml and 2 ml for needle inside and outside respectively), and lower than 50 ppm without liquid level detection.

This listing is for a Mitutoyo 202TP Vision Measuring System

This listing is for a Hettich Rotofix 32A CentrifugeA non-refrigerated general purpose centrifuge wi (more)th a large number of swing-out and angle rotors for routine laboratory applications. Features:Max RCF: 4226xgDims: 366 x 430 x 257mmMetal housing with metal lidStainless steel chamberViewing port in lidOne hand lid lockDigital control panelError displayImbalance switch offBrushless driveLarge variety of rotor and adapter optionsSpecifications:Max Capacity - 4 x 100mL, 6 x 94mLMax RCF, x g - 4,226Max RPM, rpm - 6,000Weight, kg - 23Refrigeration - Air coolingDims, w x d x h, mm - 366 x 430 x 257

COMBISTORAGE 120 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely ma (more)de of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 3 painted steel shelves + 1 retention tank with grid - COMPARTMENT FOR ACIDS: 2 plasticized steel shelves - COMPARTMENT FOR BASES: 2 stainless steel shelves - COMPARTMENT FOR TOXIC SUBSTANCES: 1 painted steel shelf (max load 60 kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

0

The Ultravap Mistral from Porvair Sciences is designed to remove the traditional laboratory ‘bottlen (more)eck’ of solvent evaporation from microplates. Fully automating the dry-down step has always been impossible because it is difficult to interface liquid handling robots with traditional centrifugal-type evaporators. The Ultravap Mistral design, by dispensing with the rotating arm of the centrifuge and offering a fully-flat front profile, overcomes this problem and is much better positioned to link with your robot. With more than 20 years experience in producing deep well microplates, Porvair Sciences has thoroughly researched the problems of drying down organic solvents in plates. The Ultravap Mistral may be operated with a supply of clean, dry compressed air in place of nitrogen, if the chemistry allows. It has been designed in close co-operation with the leading suppliers of laboratory liquid handling robots and is suitable for integration directly with the following manufacturers robots:  Hamilton Robotics, Tecan, Perkin Elmer, Beckman Coulter A built in digital gas flow meter controls the flow rate and switches off the heaters if the gas supply drops below 30L per minute for maximum safety. Between 30 and 5L per minute, the Levante may be operated without heating using gas at input temperature only. Similarly, if the pressure exceeds 7 bar, safety valves will shut down the system to prevent damage. Optimal gas supply is 70L per minute at 6 bar. Equipped with a 48 straight needle head

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

WTW OXI 3205 portable oximeter Without probe Waterproof dissolved oxygen measuring instrument Batter (more)y type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG