Radwag WPT60 C2/K

CS 120 BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extract (more)or cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3+3 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Julabo FT200 Immersion Cooler, 115V/60Hz Working Temperature Range -20°C to 30°C Refrigerant R134a  (more)Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT200 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards T-Station 85H Wet Turbo Station ISO63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Co (more)nnection DN 63 ISO-K Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All the nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of the active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85The T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station ISO63, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT85H Turbomolecular Pump with ISO63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

4x new 1x used

The Waters Acquity UPLC Binary Solvent Manager delivers solvent compositions for isocratic and binar (more)y gradient methods at flow rates of 0.01 to 2.0 mL per minute.  The binary solvent manager’s two pump channels permit quick solvent changeovers at a flow rate of 4.0 mL per minute. Low-volume degasser channels (480 µL internal volume), automated solvent-selection valves, and an automated vent valve make the quick changeovers possible.  The pump accommodates up to four chromatographic solvents and one Binary Solvent Manager Seal wash solvent.

Manufacturer: Luna (Phenomenex) Model: Luna® 5 µm C8(2) 100 Å, LC Column 150 x 3 mm Part Number: 00F (more)-4249-Y0 S/N: 605863-14 Stationary Phase: C8 with TMS endcapping Particle Size (µm): 5 Pore Size (Å): 100 Length (mm): 150 Internal Diameter (mm): 3 Solid Support: Fully Porous Silica Format: Column Separation Mode: Reversed Phase Recommended Use: Separation of very hydrophobic compounds USP Designation:L7 Used, good condition - fully functional.

Accuris PR2120-N-500 qMAX Green One-Step RT-qPCR Kit, No Rox, 500 Reactions The qMAX Green One-Step  (more)RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris PR2120-N-500 qMAX Green One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: -20ºC to 100ºC Internal dimensions (DxHxW): 100 x 100 x 100 mm Dimensions (DxHxW) (more): 500 x 235 x 505 mm

The BeadBug is a high energy benchtop homogenizer that sets the performance standard for personal si (more)zed cell disruption and lysis instruments. Simultaneous homogenization of up to 3 samples takes place (often within 45 seconds) inside the disposable 2 mL screw cap microtubes. The optimized mixing motion causes rapid cell disruption through constant high velocity impact from the hardened micro-beads chosen specifically for your sample type. With up to three tube capacity and a foot print of just 17 x 21 cm, the BeadBug is the ideal homogenizing instrument for low to medium throughput laboratories. Timer: 3 sec to 3 min. Capacity: 3 x 2.0 mL tubes Speed: 2700-4000 rpm PCR: suitable Dimenisions (WxLxH): 170 x 210 x 135 mm Weight: 2.2 kg