Potteau 3 Drawer cabinet L.Grey 600

Eppendorf F-35-30-17 Rotor for 5702/R The Eppendorf F-35-30-17 Rotor including 30 sleeves. This roto (more)r has a capacity of 30 x15ml, reaching speeds of 4,400 RPM with a max RCF of 2,750 x g. It can be used in Eppendorf 5702 or 5702R centrifuges. INCLUDED: The Eppendorf F-35-30-17 Rotor for 5702/R includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-35-30-17 Rotor SpecificationsMax RCF2750 x gMax Speed4,400 rpmCapacity30 x 15mlRotor TypeFixed AngleCompatibilityEppendorf 5702/R

Range: -2.0 to 16.0 pH pH Resolution: 0.1 pH pH Accuracy: ±0.1 pH Temperature Range: -5.0 to 60.0°C  (more)Temperature Resolution: 0.1°C Temperature Accuracy: ±0.5°C Calibration: Automatic, at 1 or 2 points with 2 sets of memorised buffers Battery Type/ Life: 4 x 1.5V with BEPS / approx. 300 hours of continuous use; auto-off after 8 minutes of non-use Dimensions: 163 x 40 x 26 mm Weight: 100g

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg

NanoSight NS300 Nanoparticle Tracking Analyser Lab This item was removed from a university where it  (more)was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. There are cosmetic scratches on the unit which do no affect the function.

This Waters Xevo G2 Q-Tof LC-MS Mass Spectrometer is being sold on behalf of a university lab where  (more)it was surplus to requirements. The unit was serviced and then professionally decommissioned by Waters. The reports are available on request. The engineers who decommissioned it are on hand to recomission it once we have a buyer (location dependent). It is in excellent cosmetic condition with minor marks.

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 kg to 50kg for F2 class and lower. The comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator 5Y.PM.KB series comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. High measuring accuracy is guaranteed by semi-automatic adjustment system with external mass standard. The weighing pan is made of aluminium and features holders for centering the tested mass standard. The 5Y.PM.KB series features an intuitive menu supporting a user while operating the instrument.

Hermle OLEUM Oil Testing Centrifuge, 230V ONLYThe OLEUM Oil-Testing Centrifuge is our stand alone oi (more)l testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample. The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle OLEUM Oil Testing Centrifuge, 230V ONLY includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Capacity: 30 g/ 60 g/ 110 g/ 160 g Readability: 1 mg/ 2 mg/ 5 mg/ 10 mg Reproducibility: ±1 mg/ ±2 m (more)g/ ±5 mg/ ±10 mg Linearity: ±1 mg/ ±2 mg/ ±5 mg/ ±10 mg Response time: 2 sec Weighing plate: Ø 80 mm Weighing chamber height: 200 mm Weight: 5.5 kg