Pioneer PX4201 Ohaus

Ohaus Scout STX portable scale, with plate Ø 93mm These balances are ideal for laboratory and indust (more)rial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically

Ohaus MB120 Moisture Analyzer MB120 allows you to run more samples, access saved data and spend less (more) time preparing and more time working with results. Smart, futuristic features that allow you to work at full potential: - Get started with SmartGuide ™ right away. This revolutionary feature automatically analyzes a sample and creates a method, thus eliminating any uncertainty from the initial setup. - The MB120 is able to produce fast and accurate results thanks to features such as a halogen heating system, customizable shutdown criteria and four integrated drying profiles. - The MB120 allows you to store up to 100 methods and 1,000 measurement results. Stored results can be exported and methods can be shared across multiple devices. Applications Determination of percentage humidity, determination of the recovery of percentage humidity, determination of solids in percentage, weighing Display 4.3 inch TFT color touchscreen display Operation Power cord (included) Communication RS232 with GLP / GMP data output, USB host and USB device (included) Structure Metal base, ABS top housing, halogen heat source, stainless steel plate holder, stainless steel plate manipulator, protective hood Construction features Seven shutdown criteria (manual, timed, custom automatic% / s, custom automatic mg / s, A30, A60 and A90), four drying profiles (standard, fast, ramp and step), storage up to 100 methods and 1,000 results for all methods, user guide, heating temperature range from 40 to 230 ° C (in 1°C increments), 14 languages ​​of operation Technical features Resolution for moisture content: 1mg/0.01%. Heater type: halogen lamp. Heat profiles: Standard; Fast; Ramp; Step. Recommended humidity range: 0% - 100%. Sample size: 0.5g – 1290g. Shutdown criteria: Manual; Timed; Automatic - Preset weight / time loss; Custom - User configurable weight / time loss; Custom: User configurable% moisture / time loss. Test library: 2. Additional features - MB90 Upper housing in ABS, weighing pan support in stainless steel, pan holder in stainless steel, protective hood, 3 shutdown criteria (manual, timed or automatic), 2 heating profiles (standard and fast), storage of up to 2 methods and 100 test results for each method, user guide, heating temperature range 40–200°C (in 1°C increments), 13 operating languages ​​(display only, no typing). Drying profiles Two pre-set profiles for drying in one step: just set the temperature and the timer. FAST: reaching the temperature in the shortest possible time. STANDARD: reduces overheating to a minimum while still reaching the temperature quickly. The simplest control panel • Icon driven menu navigation; no training is required. • 4 mechanical keys for fast one-step operation: Tare, Start/Stop, Print, On/Off. • Simplified moisture analysis; in just 3 steps, routine testing on samples: 1. Tare the empty sample dish. 2. Add sample according to best practices. 3. Press start and see your results! Halogen heating dries samples in seconds and is 40% faster than traditional infrared methods. Large, bright touchscreen display and quick and easy menu navigation for precise moisture analysis. Versatile connectivity options to handle data collection and transfer needs: improve user experience. • USB and RS232 ports - quick connections to a PC or flash drive. • Data collection and transfer directly to a USB stick.

Made of fabric, protects device housing against dust, dirt, etc.

The anti-draft chamber is an optional accessory intended for microbalances working in unfavourable c (more)onditions (air-drafts). It is mounted on a table, inside the microbalance is placed. The chamber features sliding side panes allowing free access to the weighing chamber of the microbalance. CAUTION: The anti-draft chamber is to be used in a set with a granite anti-vibration table exclusively. It cannot be used with the anti-vibration table intended for laboratory balances.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

Paper for RTP printer - 80mm.

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Mass comparators of UMA 1000 series stand for the highest standard of professional automatic mass co (more)mparators. They provide comparison of 100 g – 1000 g weights of E1 and 10 g - 1000 g weights of E2 and lower classes. The device is equipped with 18 magazine positions allowing to deposit up to 18 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.

MYA Microbalances are very precise laboratory devices. They have unmatched repeatability values, the (more)ir readability is impressively high (from 1 µg), and their maximum capacity – very small (to 52 g). It is these three features that make MYA Microbalances excellent weighing devices for very small masses, used in research laboratories, including pharmaceutical, physical, chemical, biological and medical ones. Thanks to the best weighing parameters, the microbalances of this series will prove themselves in the most advanced laboratory processes. Why Choose MYA Microbalances in Particular? MYA Microbalances have the world’s lowest reading unit [d] 1 μg and the lowest minimum weight [USP] 0.82 mg. They are equipped with an automatic, draft-proof weighing chamber and have a fully automatic levelling system. Automatic levelling is more convenient than semi-automatic and manual ones, saves time, and, above all, guarantees model position of the measuring system and gives maximally precise measurement results. We offer a large selection of MYA Microbalance models, and thus a wide spectrum of readability and maximum capacity, which translates into a variety of applications for this series of balances. Do you need a balance that not only determines weight with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Polyscience AP15H200-A11B 15L Heated Circulator, Advanced Programmable (Ambient +10 to 200C), 120V,  (more)60Hz3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AP15H200-A11B 15L Heated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP15H200-A11B 15L Heated Circulator, Advanced Programmable (Ambient +10 to 200C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg