Perkin Elmer Lambda 25 35 45 2 Place Cuvette Cell Holder Küvetten Halter

System consists of: PAA KiNEDx arm Peak Analysis 1M linear rail Peak Analysis CS-10 carousel with st (more)acks 2 Microplate stackers Software As-is, no warranty

Complete system with vacuum pump and 4 liter PP bottle Adjustable extraction speed and non-contact l (more)evel monitoring Vacuum controller: Touchpanel Number of heads/stages: 1/1 Max. pumping speed at 50/60 Hz: 0.7/0.85 m3/h Ultimate vacuum (abs.): 150 mbar Control range: 150 – 850 mbar (adjustable) Collection bottle: 4l Polypropylene Max. back pressure (abs.): 1.1 bar Rated motor speed at 50/60 Hz: 1500/1800 rpm Dimensions (LxWxH): 410 x 194 x 448 mm Weight: 7.3kg

Manufacturer: Luna (Phenomenex) Model: Luna® 5 µm C8(2) 100 Å, LC Column 150 x 3 mm Part Number: 00F (more)-4249-Y0 S/N: 605863-14 Stationary Phase: C8 with TMS endcapping Particle Size (µm): 5 Pore Size (Å): 100 Length (mm): 150 Internal Diameter (mm): 3 Solid Support: Fully Porous Silica Format: Column Separation Mode: Reversed Phase Recommended Use: Separation of very hydrophobic compounds USP Designation:L7 Used, good condition - fully functional.

Insta NX® Mag32 Automated Nucleic Acid Extractor is a modern bench top magnetic bead based system fo (more)r DNA and RNA purification from a wide range of samples. With built-in magnetic rods to transfer particles through the entire process of purification starting from binding, mixing and washing to elution, it reduces manual intervention to a bare minimum. This hassle-free extraction system helps one to obtain fine quality ultra-pure DNA and RNA that can be directly used for further downstream processing. Features 1. Large 7” touch screen for ease of operation 2. Quick extraction protocols, 13-40 minutes / cycle depending on the sample type and method 3. Pre-installed programs for effortless extraction of nucleic acid 4. In-built sterilization with UV lamp to avoid contamination 5. Compact and closed design to prevent any possible injuries 6. Capable of processing up to 32 samples per run with initial sample volume up to 400μl. Weight - 51KGDimensions - 67cmL x 53cmW x 70cmH

CABINET CSB63 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thic (more)k electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Division into 3 compartments for storing the different families of non-flammable chemicals separately - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - Compartment for ACIDS: 2 plasticized steel shelves - Compartment for BASES: 2 stainless steel shelves - Compartment for TOXIC SUBSTANCES: 2 painted steel shelves - For all, max load 40 Kg distributed evenly Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

The new ETHOS X for the Microwave Green Extraction of Natural Products is available in two different (more) and interchangeable configurations, for fragrances and flavors. The ETHOS X takes advantage of a unique microwave selective heating mechanism to produce effective and consistent results time and time again. The fragrances configuration is based on the solvent-free microwave extraction (SFME) technology for the rapid extraction of essential oils from aromatic herbs, spices and dry seeds. The method involves placing a sample in the microwave reactor. A cooling system outside the microwave continuously condenses the vapors which are collected in a fragrances glassware. The excess of water is refluxed back to the extraction vessel to restore the in-situ water of the sample. The flavors configuration is based on the microwave hydro-diffusion and gravity technology (MHG), a new and green method of essential oils extraction from various aromatic plants. The microwave hydro-diffusion and gravity technology (MHG) combines microwave heating and earth gravity at atmospheric pressure to allow flavors to diffuse outside the plant material. Outside of the microwave oven a cooling system continuously condenses the extract. With both methods, after the essential oils are extracted they can be analyzed directly by GC-MS without any preliminary clean-up or solvent exchange steps. Including IKA RC 2 Control recirculating chiller

Wesemann / Door cabinet / White /  730x300x580

one digital tester Manuf: Wandel & Goltermann Model: TKL-12 description: display: high > +0.7 U ... (more).......low < +0,3 Uimpulse limit:                           ca. 0.5 UVimpulse duration:                   > 1usec power supply:                         + 12 - 14 VDCinput                                           1 MegOhm, 25 pFinput cirrent                              15 uA a very versatile instrument to check and display logic states of CMOC or 12 V logic units quickly and effective up to 0.5 MHz Tester in is used  condition and 100 % functional tested - comes with case and manual