Packard TopCount NXT Microplate Scintillation and Luminescence Counter

Polyscience P60N2A101B IP-60 Immersion Probe Cooler, 1.5 Rigid Coil Probe, -60 to -20C, 120V, 60Hz3D (more) Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P60N2A101B IP-60 Immersion Probe Cooler, -60°C to -20°C, 150W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience MX08P100-A11B 8L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures -  (more)Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video INCLUDED: The Polyscience MX08P100-A11B 8L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo DYNEO DD-200F Refrigerated Circulator with Analog Output, 115V/60Hz (NRTL Certified) Refriger (more)ant R134a Working Temperature Range -20°C - 200°C Cooling Capacity 200W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe DYNEO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refigeration combinations afford low temperature capabilities from -20 °C to -50 °C with an upper temperature limit of 200 °C. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB connection for external PC control and data-logging with digital options includin RS232 port or an analog module interface for voltage or current control. PID temperature control provides ±0.01 °C stability. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tanks with integrated drain port.Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-200F Refrigerated Circulator with Analog Output, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO CP-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz Refrigera (more)nt R449A Working Temperature Range -30°C - 200°C Cooling Capacity 300W (at 20°C) Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over (internal and external circulation) - External pump connections (M16x1) - USB connection - Space-saving cooling coil design yields more usable space in the bath tank - Bath lid and drain tap included - Removable ventilation grid - Refrigeration unit without side vents - Class III (FL) according to DIN 12876-1 CORIO™ CP-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.03 °C stability. Suitable for temperature applications with cirulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally and an adjustable pump from 8-27 L/min; 1.5-10.2 PSI. The CORIO CP includes USB-B and RS232 ports for PC communication and a USB-A port for datalogging. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 300W cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo CORIO CP-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 each barbed fitting for tubing 8 and 12 mm inner dia. (pump connections M16x1 male) - Power Cord - Two Year Manufacturer's Warranty

Heidolph Hei-VAP Expert Control HL/G3 Hand Lift w/ G3 Vertical GlasswareThe Hei-VAP Series of rotary (more) evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control HL/G3 Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - G3 Vertical Glassware - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Non invasive and objective measurement of cell confluence, growth and clonality for successful mamma (more)lian cell culture. CloneSelect Imager revolutionizes cell line management by replacing time consuming and laborious manual techniques which are subjective and inconsistent. White light imaging: Trans-illumination Data tracking: 1 x internal barcode reader for data tracking of each plate Camera: High-resolution CMOS camera Imaging speed: <90 sec in standard mode Objective: 4x Resolution: 3.6 micron Source plate capacity: 1 x plate Source plate type: 6-, 12-, 24-, 96- and 384-well SBS microplates Dimensions (WxHxD): 720 x 428 x 575 mm Weight: 45 kg

GC/MS Perkin Elmer that includes a GC Perkin Elmer Autosystem XL with FID, autosampler 82 positions  (more)and 2 injectors split/splitless, mass spectrometer detector Perkin Elmer Turbomass Upgrade single quadrupole and vacuum pump rotary Edwards RV3. Includes full PC, software-Turbomass 5.1 version, a library of compounds in the Nist and user manuals. Specifications: Large-volume injection. Controlled by a microprocessor. Able to accept a wide selection of capillary columns of phase states. Able to accept a series of detectors, universal and selective.

Memmert UN160PA Natural Convection Paraffin Oven 161L, 115V Setting Temperature Range +20°C to +80 (more)°C Setting Temperature Accuracy 0.1 °C Chamber Volume 161 L (5.7 cu. ft.) Features - Spacious 161 L (5.7 cu. ft.) internal volume for versatile storage - Temperature range from min. 5°C above ambient up to +80°C, with 0.1°C accuracy - Equipped with 2 Pt100 sensors for precise temperature monitoring and error handling - TwinDISPLAY control panel with adaptive multifunctional PID-microprocessor and high-definition TFT-color displays - Adjustable timer with digital backwards counter, customizable from 1 minute to 99 days - Natural convection and AtmoCONTROL software for efficient, programmable operation - Integrated AutoSAFETY and autodiagnostic system for enhanced safety and fault detection - Durable, nearly gas-tight stainless steel interior reinforced with deep drawn ribbing and protected heating The Memmert UN160PA Natural Convection Paraffin Oven 161L, 115V is designed to meet the highest demands for precision, safety, and flexibility in laboratory heating applications. Offering a spacious 161 L (5.7 cu. ft.) internal volume, this oven provides a wide temperature range from a minimum of 5°C above ambient up to +80°C, maintaining an accuracy of 0.1°C. Equipped with dual Pt100 sensors in a 4-wire circuit, the oven ensures precise temperature control with automatic error handling, guaranteeing uninterrupted performance. The advanced TwinDISPLAY control panel features an adaptive PID-microprocessor, supported by two high-definition TFT-color displays, enabling easy monitoring and adjustment. With natural convection and AtmoCONTROL software, the UN160PA allows for efficient programmable operation and seamless data management via USB or Ethernet. The integrated AutoSAFETY system with audible and visual alarms actively monitors temperature limits to prevent overheating, while an autodiagnostic system facilitates rapid fault analysis. Its durable stainless steel interior is nearly gas-tight and reinforced with deep drawn ribbing for optimal heating distribution, supporting loads up to 462 lbs. This oven combines precision and safety with an easy-to-clean design, making it ideal for laboratories demanding dependable performance and flexibility. INCLUDED: TheMemmert UN160PA Natural Convection Paraffin Oven 161L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

M1 Mass Standard - knob weights. Nominal value - 2 g.

Benchmark BenchMixer Vortexer Speed Variable, 200 to 3000 RPM Orbit 3 mm) Operating Mode Touch or (more) Continous Features - Advanced Q-Drive for smooth, instant vortexing. - Maximum vortex action, minimal noise/vibration. - "No-walk" suction feet, spill-proof controls. - Speed range: 200 to 3,200 RPM, 3mm orbit. - Dimensions: 5 x 6.3 x 6.7 inches (13 x 16 x 17 cm). Your browser does not support the video tag. The BenchMixer sets the new standard in vortex mixing. With advanced Q-Drive technology, the BenchMixer provides smooth instant vortexing of even the largest sample sizes, including full 50ml tubes. The unique counter-balance system creates maximum vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls.INCLUDED: The Benchmark BenchMixer Vortexer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty