Ohaus i-D33XW150C1L7 AM Defender 3000 Washdown Bench Scale, 300 lb., 0.05 lb.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Yamato WG-301UVUFR Auto Pure Remote Dispense Type 1 Water Purification System with UV and UF, 120V C (more)onfiguration Remote Dispense Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, remote dispense configuration water purification system in 120V with UV oxidation lamp and ultrafiltration. It produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, ultraviolet light for bacteria sterilization and TOC reduction, and ultrafiltration for pyrogen removal and nuclease free water. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WG-301UVUFR Auto Pure Remote Dispense Type 1 Water Purification System with UV and UF, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA M20 Universal Mill Useable Volume Max. 250 ml Speed Max. 20000 rpm Feed Grain Size Max. 7 mm  (more)Features - Double-walled grinding chamber with water cooling for precise temperature control. - Removable grinding chamber for easy cleaning. - Dual operation capability with two grinding chambers using one drive unit. - Includes M 21 blade for efficient grinding of hard and brittle substances. - Robust stainless steel construction for durability and reliability. The IKA M20 Universal Mill is a robust batch mill designed for dry grinding of hard and brittle substances up to 250 ml at a fixed speed of 20,000 rpm. Featuring a double-walled grinding chamber with water cooling capabilities through two hose adapters, it ensures precise temperature management during operations. The removable grinding chamber simplifies cleaning and maintenance, while its dual-chamber operation with a single drive unit enhances versatility. This mill includes the M 21 blade, crafted from stainless steel, to effectively handle challenging milling tasks in laboratory settings.INCLUDED: The IKA M20 Universal Mill includes: - M20 Mill - M 21 Blade - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA M20 Universal Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input450 WMotor rating output225 WSpeed max.20000 rpmCircumferential speed max.72 m/sUseable volume max.250 mlFeed hardness max.5 MohsFeed grain size max.7 mmMaterial beater/cutterstainless steel 1.4034Material milling chamberstainless steel 1.4301Power-ON time7 min Power-OFF time10 min Milling chamber, can be cooled with wateryesMill feed can be cooled in milling chamber with dry iceyesDimensions (W x H x D)170 x 350 x 170 mmWeight6.6 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage230 / 115 / 100 VFrequency50/60 HzPower input550 W Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 153 x 128 x 109 (more) mm Weight: 730g

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW