Ohaus 30400168 Modular Heat Block, 5 x 50 mL Conical Tubes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PreSens Shake Flask Reader Model: SFR V2 This was removed from a university lab where it was surplu (more)s to requirements. The unit has not been tested but is in good cosmetic condition with minor marks.

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Polyscience P80NHA101B IP-80 Immersion Probe Cooler, 1.75 Rigid Coil Probe, -80 to -40C, 120V, 60Hz3 (more)D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P80NHA101B IP-80 Immersion Probe Cooler, -80°C to -40°C, 215W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Manufacturer: Leica Model: Diskussions Tubus Adapter Microscope Teaching Arm Dual Heads / View Bridg (more)e w/ Mechanical Pointer P/N: 513578 S/N: 01159 Description: Leica diskussions tubus is a microscope teaching arm with dual heads. Items delivered: - Leica Diskussions Tubus Adapter Microscope Teaching Arm Dual Heads / View Bridge - Mechanical Pointer Condition: The Diskussions Tubus is in good cosmetic as well as clean working condition - all optics clean and movements all in working order. It is 100% functional tested and ready to be applied.

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-27385 2 x Boxes of Long GlasswareITEM-27382 Black Container of mixed glasswareITEM-27383 Box of Mixed Small GlasswareITEM-26089 Incubator TraysITEM-40020 Unnamed Microplate Reader parts Spares/RepairsITEM-26088 Incubator TraysITEM-26087 Incubator TraysITEM-26086 Incubator TraysITEM-26090 Freezer rackingITEM-28308 Electrothermal Heating MantleITEM-28321 High pressure arc lampITEM-28311 Grant WaterbathITEM-28316 Biodine Fractional Horsepower GearmotorITEM-28312 Unknown plastic componentsITEM-28314 Mixed lab accessoriesITEM-28315 IKA-Werke Type: VX2ITEM-28313 Mass spectrophotometer tubesITEM-28320 Corning Incubator/OvenITEM-28317 Edwards Thermocouple 507ITEM-28309 Oertling GC121/00ITEM-28318 Medexxa HTC100ITEM-28303 Millipore Masterflex PumpITEM-28304 UVP Mineral LightITEM-28310 Unknown Metal ComponentsITEM-28305 FisherBrand PF-1502ITEM-28299 Bio-Rad Sub-Cell Model 192ITEM-30030 Brunel MicroscopeITEM-30036 Leybold Didactic MicroscopeITEM-30033 Motic MicroscopeITEM-27884 Vickers Instruments MicroscopeITEM-26017 IBM ThinkPad Docking StationITEM-05099 opticon bar code readerITEM-26082 Random PartsITEM-26079 Box of cables and pump partsITEM-25523 Grant Water BathITEM-13323 Smart Wireless U-RX UHF Radio Mic ReceiveR AV EquipemntITEM-27885 Vickers Instruments MicroscopeITEM-27886 Vickers Instruments MicroscopeITEM-27887 Vickers Instruments MicroscopeITEM-27888 Vickers Instruments MicroscopeITEM-27889 Vickers Instruments MicroscopeITEM-27904 Vickers Instruments MicroscopeITEM-27891 Vickers Instruments MicroscopeITEM-27905 Vickers Instruments MicroscopeITEM-27892 Vickers Instruments MicroscopeITEM-27893 Vickers Instruments MicroscopeITEM-27898 Vickers Instruments MicroscopeITEM-27895 Vickers Instruments MicroscopeITEM-26025 Kramer Tools VP-211 Automatic VGA/Audio SwitcherITEM-04659 Panasonic Telephone

Thermo Heraeus B6060 culture and incubation oven. Capacity 57L. Temperature range from room temperat (more)ure + 5ºC to 70 °C.   Stability at 37°C ±°C 0.8. Air regulation adjustment. Digital display. Interior dimensions 403*380*370 mm; exterior 744*552*535mm. 52 kg. Includes 2 shelves. User manual. The Heraeus B-6060 incubator is a high-quality piece of equipment designed to provide a precise and controlled incubation environment. With its uniform heating ability and wide adjustable temperature range, this oven is ideal for incubation applications in laboratories and research centers. It features a digital control system that allows you to easily program and monitor the temperature, as well as a heat-resistant glass door that allows for a clear view of the interior. Additionally, the Heraeus B-6060 incubator is equipped with a safety system that includes temperature alarms and an automatic shutdown in case of overheating. With its compact and durable design, this incubator is a reliable and efficient option for any laboratory that requires precise temperature control during the incubation process.

PS X2.M is a series of advanced-class precision balances of high resolution based on RADWAG MonoBLOC (more)K technology. The innovative construction of PS X2.M balance features a new single-point weighing pan fastening, which ensures its excellent geometry and minimizes eccentricity error. The labyrinth-shape fastening guarantees excellent resistance to contamination. Weighing module RADWAG MonoBLOCK technology enables weighing loads with the readability of d=0.01 g at the maximum capacity of 10 kg. Rigid base ensures stability of the weighing system and great resistance to shocks. Internal adjustment system means precision and high measurement repeatability. Leverage of internal weight mass enables adjustment within the whole measuring range. Features: d=0.01 g readability at 10 kg max capacity great resistance to ambient conditions stability and repeatability over time RADWAG MonoBLOCK technology internal adjustment within the whole measuring range complex databases and ALIBI memory ergonomic 5” colour touchscreen touch-free operation Databases The instrument allows saving completed measurement data as complex reports and graphs. There are 7 databases: Operators (max 100 entries), Products (max 5 000 entries), Weighings (max 50 000 entries), Packaging (max 100 entries) Formulations (max 100 entries), Customers (max 1000 entries), The balance enables creating formulation reports (max 500 entries). ALIBI memory provides data protection and facilitates automatic measurement recording (max 500 000 weighing records). The memory facilitates data previewing, copying and archiving. Communication PS X2.M series is equipped with the following interfaces: 2 x RS 232, USB type A, USB type B, Ethernet and Wireless Connection. USB allows for fast transfer and copying of work results (measurements, reports, databases) to a computer or other weighing device. The balance provides possibility of remote data management.

Heidolph Overhead Stirrer Telescope Stand The Heidolph Overhead Stirrer Telescope Stand is a reliabl (more)e and versatile stand designed for use with Heidolph Overhead Stirrers in laboratory settings. With a stand tube diameter of 32mm and an adjustable length of 725 to 1,025mm, this stand can accommodate a wide range of stirring applications. It has a leg distance of 370mm and a weight of 7.7 kg, providing stability and support for your stirring needs. This stand is compatible with Heidolph Overhead Stirrers, ensuring accurate and efficient stirring performance. The Heidolph Overhead Stirrer Telescope Stand is a valuable addition to any laboratory that requires precise and reliable stirring of samples. It is easy to assemble and adjust, making it a practical solution for a variety of applications. INCLUDED: The Heidolph Overhead Stirrer Telescope Stand includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Eppendorf 1 x 50ml Adapters, Cat. # 022637681 Eppendorf 1 x 50ml Adapters, Cat. # 022637681 forA-4-4 (more)4 rotor for one tube 30 - 50 ml. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 1 x 50ml Adapters, Cat. # 022637681 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 1 x 50ml Adapters, Cat. # 022637681 includes: - Full 6 Month Parts and Labor Warranty