Ohaus 30400167 Modular Heat Block, 4 x 35 mm Tubes

RCT basic ETS-D5 Solution Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Setting a (more)ccuracy speed 10 rpm Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The RCT basic ETS-D5 Solution consists of the RCT basic magnetic stirrer and the ETS-D5 electronic contact thermometer making experiments and reactions even safer. Improved temperature controlBy combining the two devices, the internal safety circuit, which is independent of the RCT basic software, can be addressed directly by the contact thermometer. For this purpose, the maximum permissible temperature in the medium is limited independently of the set point temperature. If this value is exceeded, the heating function of the magnetic stirrer switches off via the internal safety circuit - until the device is restarted. At the same time, the stirring function is maintained to avoid boiling distortions. The set safety temperature of the heating plate also remains available. The set temperature limitation of the ETS-D5 and the safety temperature of the hotplate are OR-linked. This means that every potential error leads to the heating being switched off. In addition, the temperature of the heating plate can be set independently of the medium. In this way, you actively influence the heating times. Improved displayWith the ETS-D5, you also enhance the display of your magnetic stirrer. You can see the set and actual value of the medium temperature at a glance with a resolution of 0.1 K on the contact thermometer. The setting accuracy is also refined from 1 K to 0.1 K in this combination. The current hotplate temperature is also displayed on the RCT. Another plus: The display of the contact thermometer can be placed at eye level. This makes it directly visible where the temperature is measured and controlled. In addition to the magnetic stirrer and contact thermometer, the complete solution also includes all the necessary mounting elements.INCLUDED: The RCT basic ETS-D5 Solution includes: - H 16 V Support rod - H 44 Boss head clamp - Screw driver - ETS-D5 - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - RCT basic - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf F-45-36-8 Fixed Angle Rotor with Lid Eppendorf F-45-36-8 Fixed Angle Rotor with Lid, new  (more)in box. Cat. # 022636600. This rotor accommodates 36 x 0.5ml. The Eppendorf F-45-36-8 Fixed Angle Rotor is for use in the Eppendorf 5415D and 5415R Centrifuges. INCLUDED: The Eppendorf F-45-36-8 Fixed Angle Rotor with Lid includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-45-36-8 Fixed Angle Rotor SpecificationsMax Speed13,200 RPMMax RCF16,110 x gCapacity36 x 0.5ml

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus FC5515R Frontier Micro Centrifuge The Ohaus FC5515R Frontier Micro Centrifuge is a sophisticat (more)ed, high-performing lab device designed for liquid separation applications. With a sleek, compact design that saves valuable lab space, this micro centrifuge is engineered to provide smooth and dependable high-speed operation for critical lab applications, including DNA/RNA preparation, ultra-filtration, and more.The FC5515R's easy-to-use control panel with a rotary knob allows for simple operations. This includes setting and recalling speed and g-force, as well as controlling the temperature. Its intuitive interface allows for immediate accessibility and adjustment of key parameters, making it one of the most user-friendly centrifuges on the market.Propelling high performance is a powerful brushless induction motor along with 10 acceleration and deceleration settings. Moreover, a memory function for up to 99 commonly used parameters provides convenience and helps streamline the work process.The FC5515R has been designed with multiple safety features to protect against injury. The motorized lid-locking system prevents the centrifuge from opening during operation, and the rotor imbalance sensor stops the centrifuge if the rotors become imbalanced or sudden shock occurs. This acts as a safety measure, protecting the operator from high-speed spinning rotors.Moreover, bio-containment rotors facilitate research involving hazardous samples, thereby adding an extra level of safety and versatility.The Frontier Micro Centrifuge offers flexibility for varied centrifugation needs. It has a maximum capacity of 44 × 1.5/2 mL and 12 × 5 mL tubes, and it's the only centrifuge in its class compatible with 6 rotors (7 rotors for the 5515 model), including a PCR strip tube rotor. It's the most economical centrifuge on the market to include a unique 5 mL tube rotor. The centrifuge's signature snap-on rotor and lid locking system allow for quick and easy installation of rotors with just one press of a button.In conclusion, the Ohaus FC5515R Frontier Micro Centrifuge offers exceptional performance, versatility, safety, and user-friendliness. It's an excellent choice for labs requiring high-speed, reliable centrifugation.Click Here to View Product Video INCLUDED: The Ohaus FC5515R Frontier Micro Centrifuge includes: - Power Cord - Two Year Manufacturer's Warranty

Chamber dimensions (Ø x depth): 500 x 500 mm Capacity: 117 L See for additional info: https://www.sy (more)stec-lab.com/autoclaves/vertical-top-loading-autoclaves-40-150-l/

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW