NEW Perkin Elmer N2920149 Rev E Deuterium Lamp Lampe LC-290 Series 200 LC-295

HACH LANGE LT 200 DCO heating block Model: LTG082.01.23002 LT200 Temperature: 37 to 150°C per 1°C Ti (more)me: 0-480 mins Heating: from 20°C to 150°C in 10 minutes Stability: +/-1°C Dimensions HxWxD: 145x250x310 mm Power supply: 220 V - 50/60 Hz - 600 VA Safety: maximum insulation, transparent protective cover locks, audible signal at end of program For 30 Ø13mm tubes Equipment tested at 120°C

ElectroThermal Wax Dispenser MH8523B This item was removed from a university laboratory where it was (more) surplus to requirements. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition other than wax covering much of the exterior, including the handle.

Heidolph Hei-VAP Core HL/G3B Coated Hand Lift w/ G3 Vertical GlasswareThe Hei-VAP Series of rotary e (more)vaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G3B Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3B Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

IKA Stirring Element Propellers R1342 Pack of 4   These were removed from a lab where they were (more) surplus to requirements. They are new and unused. 471000 Diameter of Propellor: 4.8cmDiameter of Bar 3.8mmLength of Bar: 35cm

Edwards Auto 306 Thermal Evaporator Coating System This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up but displays the following error; 'Backing Error'Meaning: The backing pressure is above the pressure in pressure store 5.Action: Check that the store is correctly set (refer to Volume 2); if so, check for a leak in the system. It is in good cosmetic condition with marks from use. Included with it are; Edwards RV8 PumpSerial#: 972124615 Edwards Oil Mist Filter EMF10Code#: A462 26 000 Edwards PV25EKASerial#: 974118903 Additional items included: Auto 306 Vacuum Coater Installation and Operation Manual. x 12Various FusesVarious Screws & FixingsVarious BracketsSpanner x 2Edwards Vacuum Coater InstructionsEdwards Vacuum Coater Accessories InstructionsInstructions Manual R.F Generator Model SG-1250 Photos provided of all listed above.

Memmert IF75plus Forced Circulation Incubator 74L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 74 L (2.6 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF75plus Forced Circulation Incubator 74L, 115V offers precise temperature control with a working temperature range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, ensuring consistent conditions for sensitive lab processes. Its 74 L (2.61 cu.ft.) stainless steel interior is designed for durability and easy cleaning, while the TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive control over key parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures even temperature distribution, making it ideal for various laboratory applications. For enhanced safety, the Memmert IF75plus is equipped with AutoSAFETY features, including an over- and undertemperature monitor, and a mechanical temperature limiter TB for added protection. The Function SetpointWAIT ensures the process only starts when the target temperature is reached, optimizing precision. Additionally, the incubator includes a fixed sterilization program at 160°C for chamber cleaning, as well as an autodiagnostic system for fault analysis. With its robust construction and reliable performance, this incubator is a practical choice for maintaining optimal conditions in the lab. INCLUDED: The Memmert IF75plus Forced Circulation Incubator 74L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

F2 Mass Standard - knob weights with adjustment chamber. Nominal value - 2 kg.

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

IKA KS 4000i Incubator Shaker Type of Movement Orbital Heating Temp. Range Room Temp. +5° - 80 °C Sp (more)eed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly This innovative incubator shaker offers unattended operation in a controlled environment, featuring a large LED display for speed and time settings, antimicrobial-coated controls, and integrated PID temperature control using dual PT 1000 sensors. It includes an electronic temperature and speed control, a timer switch for up to 999 hours, and an optional built-in cooler for external cooling unit connection. Safety features include automatic shutoff when disturbed or when the hood is lifted. With a permissible shaking weight of 20 kg, a speed range of 10-500 rpm, and a heating temperature range from room temperature +5°C to 80°C, this unit ensures precise and reliable operation for various laboratory applications.