Mettler Toledo PG403-S Precision Balance Präzisionswaage 410g x 0,001g

Cabin / Suction hood HI5VP FTM TECHNOLOGIES Never used, delivered disassembled Standard single-stati (more)on cabin without door for laboratory The cabin hoods are used for filtration needs requiring a space containment. Construction: aluminum profiles, 6 mm thick safety glass Use: Application in aerosol can, spray or gun, spraying... Handling of chemical products in the laboratory, varnishing... Also suitable for solvent cleaning tanks or machines giving off heavy fumes. Can be used: In recycling: Activated carbon filter, particle filter or HEPA H14 filter In external discharge (dust filter + Ø125 mm exhaust duct) Variable flow rate: from 50 to 450-600 m3/h Power: 80 W Power supply: 230 V / 50 Hz W x H x D: 800 x 700 x 700 mm Weight: 35 kg Maintenance: Periodic filter change Rear outlet: Yes, external Ø125 mm exhaust (external discharge)

The GAC 2000 is a convenient and reliable test instrument designed for large-acreage farmers needing (more) immediate moisture, temperature and test weight information on up to 8 different grains. Measurement Method: Capacitance, conductance, weighing device Applications: Cereals, oilseeds, grass seeds, vegetable seeds, beans Measured Parameters: Moisture, temperature and test weight Moisture Range: 5 – 45 % (depending on grain) Grain Temperature: 0 – 50°C Temperature Difference: 20°C room to grain sample Temperature Compensation: Automatic Moisture Resolution: 0.1% Grain Type: Whole grain, pellets Sample Size: 250 g

GT 3000 Ultra Zero Air Generator VICI DBS Model : N-GT 3000 The GT Ultra Zero Air generator produces (more) laboratory grade purified air for various GT-detection systems (e.g. FID, NPD, FPD) and dedicated analyzers.

Cabinet for the storage and isolation of poisons, toxic chemicals and CMRs. Made entirely of FE P01  (more)electro-galvanized sheet steel (Skin passat), thickness 10/10 mm, cold press bent and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C. - 2 plastic-coated steel shelves (max load 5 kg evenly distributed) - Double layered swing door, lock and key - Opening of the doors with an angle greater than 110° which allows the extraction of the shelves without having to tilt them - Predisposition for wall mounting - Possibility of fixing in a safety cabinet (on the shelf or on the back wall of the cabinet) - Locking with safety lock and key - Can be used as a wall unit to store harmful products or inside a 1- or 2-door wardrobe - Safety symbols indicating the presence of poisons inside

LAUDA Proline immersion thermostat The LAUDA Proline bridge thermostats with vario flex pump are exc (more)ellent for thermostating in any tank. The PB models have a pressure / suction pump and are used in tanks of 200 mm. While the PBDs are equipped with pumps with more powerful pressure and used in tanks of 320 mm deep. Also available are a telescopic rod for tubs with a width of 310 to 550 mm, an ergonomic handle and attachments for side pumps. The LAUDA Proline bridge thermostats are available with two different control panels. The Master version (PB, PBD) is designed for all applications where the parameters are not changed very often. Models with the removable Command operating unit (PB C; PBD C) offer a graphic LCD screen for high ease of use and optimum functionality. Notable features - PowerAdapt system for optimal adaptation of the max. Heat output. without interfering with the mains power supply - Low level protection and adjustable overtemperature protection with audible alarm. Levels measured with float Accessories included Fittings for pump connection, telescopic rod Specific characteristics of the Proline PBD model - For tanks of 320 mm deep - Master control panel; calibration point, timer, under / over temperature alarms, digital indicators - Pump pressure mx. 1.1 bar - Tank volume max. 80 L - Water-cooled temperature range from 20°C to 300°C - Operating temperature range from -30°C to 300°C - Pump connectors M16 x 1 - Fitting 13 Ø