Metrohm Dosimat 685

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Agilent 2100 Bioanalyzer is a unique and versatile analysis tool designed to efficiently handle  (more)nucleic acids, proteins and cells on a single platform. Designed to eliminate time-consuming procedures, the Agilent 2100 system employs micro-fabricated chips which accommodate up to 12-wells requiring minimum sample consumption in the low µl-range. The compact and powerful system design of this Agilent Bionalyzer enables easy, fast, and efficient sample handling, detection, separation, and data analysis. The 2100 system prevents potential mistakes in data interpretation and storage using its efficient lab-on-a-chip technology. This bioanalyzer helps enhance PCR reactions for a variety of procedures including gene expression and  cloning. With its advanced microarrays and microarray scanner, the Agilent 2100 provides accurate solutions for gene expression analysis. The device can be used with Agilent’s add-on pressure cartridge, cell fluorescence software, and Cell LabChip for a wide range of cell applications and cytometric analyses (all not included).

Thermo Scientific Compact LidPark P00155 This item was removed from a university where it was surplu (more)s to requirement. It is in very good cosmetic condition and powers up, we are unable to test it further at our facility. Model: LidPark P00155

VACUUBRAND VACUU-PURE Shuttle The VACUUBRAND VACUU-PURE Shuttle is a mobile underframe designed for  (more)use with VACUU PURE series screw pumps. INCLUDED: The VACUUBRAND VACUU-PURE Shuttle includes: - VACUUBRAND VACUU-PURE Shuttle - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz Features - Timed  (more)dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato FO-200CR Muffle Furnace with Communication Port 3.75L, 115V Operating Temperature Range 100° (more)C to 1150°C Max. Temperature Reaching Time ~60 min. Internal Capacity 3.75L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 3.75L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-200CR Muffle Furnace with Communication Port 3.75L, 115V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Selecta Unitronic precision bath. Temperature range from ambient +5 ° C to 99.9 ° C. Stability ± 0.0 (more)5 ° C. Capacity of 27 L. Tank dimensions 20x42x 30 cm (HxWxD).Circulation pump with adjustable flow up to 12 L / min. Temperature control by microprocessor and digital LCD reading. Drain tap. Safety device due to overtemperature. User manual. Precision bath with electronic regulation Selecta Unitronic. <p>

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: stainless steel wire Nominal value: 10 mg Material: stainless steel High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Motic SMZ-171-BLED Stereo Microscope with LED Illumination Stand Magnifaction Range 7.5x - 50x Opti (more)cal System Greenough Illumination 3W LED with Intensity Control Features - Binocular Microscope; 45° inclined - Widefield WF10X/20mm - +/- 5 diopter adjustments on both tubes - Greenough zoom optical system - 0.75X - 4.5X objectives - Zoom ratio: 6:1 - Interpupillary distance: 55-75mm - Pole-type stand with transmitted illumination - Black, white, and frosted stage plates and dust cover included - Coarse focusing system with tension adjustment The SMZ171 model terminates Motic’s SMZ stereo microscope line by using modern ESD resistant materials and optimized LED illuminations for a wide range of biomedical and material science applications. The optical performance with improved transmission rates in higher magnifications is combined with reliable mechanics for daily usage. The SMZ171 is an advanced stereo microscope for biomedical work and industrial quality control.Motic’s SMZ-171 is an advanced stereo microscope for a wide range of biomedical and material science applications. The Greenough system delivers crisp and clear images in a zoom range of 6.7:1. Five click-stops within the smooth zoom allow a precise reproduction of defined magnifications. The large Field of View is ensured by the 10X/23 eyepieces. The working distance of 110mm. - Total Magnification Range options: - 10x eyepieces = 7.5x - 50x (Included) - 12.5x eyepieces = 9.375x - 62.5x (Not Included) - 15x eyepieces = 11.25x - 75x (Not Included) - 20x eyepieces = 15x - 100x (Not Included) INCLUDED: The Motic SMZ-171-BLED Stereo Microscope with LED Illumination Stand includes: - 10x/23 eyepieces - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Motic PA53MET-BD-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite (more) Objectives S-APO BD 5X, 10X, 20X, 50X Optical System Color Corrected Infinity Optical System (CCIS) Illumination Köhler Quartz Halogen 12V/100W with Intensity Control Features - Achieve precise 3D measurements with advanced Z-axis profiling and Motic’s Analysis Software. - Enjoy crystal-clear images with advanced Semi-Apochromatic objectives. - Wide field of view with 25mm WF10X eyepieces, leading the industry standard. - Work with ease using a 20° inclined trinocular head. - Color Corrected Infinity Optical System (CCIS®) for superior clarity. - Versatile magnification options with 5X, 10X, 20X, and 50X objectives. - Advanced ergonomic design, compact size, carefully sourced high-quality materials, and versatile digital capabilities ensure minimal operator fatigue during extended periods of operation. The Motic PA53MET-BD-3D is a top-tier trinocular metallurgical microscope designed for bright field observation with a 100W halogen lamp and an advanced reflected frame for 3D profiling, featuring a motorized Z-axis, a 3D control box, and a control pad. It includes widefield eyepieces offering 10X magnification and a 25mm field of view. The microscope's coded quintuple revolving nosepiece supports BD and includes a DIC slot. Equipped with Plan S-APO BD objectives (5X, 10X, 20X, 50X), it’s optimized for industrial quality control and analysis of opaque materials. INCLUDED: The Motic PA53MET-BD-3D Trinocular Upright Industrial Microscope w/ Analysis Professional Software Suite includes: - S-APO BD Objectives: 5X, 10X, 20X, &amp; 50X - 10x/25mm Widefield Eyepiece - Moticam S6 - 0.5X X C-Mount Adapter - Motic Analysis Professional Software - Integrated ND6, ND25, and LB filters - 4x4 in. Stage - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty