Matrix Thermo Elektronische Electronic Pipette 12 Kanal Channel Impact - 125 ul

This listing is for a Clearmark ICE Viper plus Thermal Inkjet Coder with Stainless Steel Conveyor

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

Work area: 205 x 205 mm Max 36V/4A

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Phenometrics enable scientists to study algae under the same conditions found outdoors in the ponds, (more) but in the much more efficient confines of the laboratory. Each computer-controlled PBR uses breakthrough technology to re-create the environmental conditions such as temperature, light intensity, and CO2. Choose from pre-programmed experiments, or quickly and easily design your own, with the growth variables that are most important to you. Many researchers use the PBR to set specific parameters to maintain consistency between experiments. Most importantly, the PBR enables reproducibility, a key factor in algae research experiments. The PBR saves time and money while producing better results. Each PBR is also a measurement instrument, measuring growth rates, pH, and other factors in the algae reactor vessel, which are displayed on the computer monitor in a graph or data display. It is customizable to accommodate various probes and sensors that monitor algae culture and growth metrics. 3000 μ-Einstein LED specially designed lighting system with conical vessel that accurately mimics BOTH raceway or production tube bioreactors (controllable from 0- 3000 in steps of 25 μ-Einsteins. Fully programmable Diurnal Cycles; you set the length of sunlight day, and also the hour of peak sunlight. Fully programmable heating and cooling, linkable to the diurnal cycle; you can independently set the hour of peak heating (if different from peak sunlight). Active cooling and heating, from 5 – 50°C Algal Command Software provides for complete, simultaneous, integrated control of up to 256 bioreactors from a single computer, with collation of all data. All the reactors are linked together via Ethernet Hub. CO2 programmable and controlled from Algal Command. Mixing through active magnetic stirring and/or gas sparging. Active sparging of up to two gasses Temperature measurement True Turbidostatic measurement Field-configurable, fully autoclavable, low cost durable polycarbonate reactor vessel The reactor vessel can have as many inlets and outlets as you require 100% (+/- 10%) directly-proportional (by volume) up-scale to pond, raceway, or indoor reactor pH measured and controlled by Algal Command Custom-engineered Turbidostatic Pump allows for true turbidistatic operation; fully programmable and computer-controlled. System contains 4 reactors and pumps with laptop Culture vessel volume: 700ml Working volume: 150 – 600ml Light intensity: Variable up to full ocean sunlight at equator (>3000 mmol photons m-2 s-1) in steps of 25 Temperature control: Active cooling and heating Culture temperature range: 10 – 50°C Diurnal + heating and cooling cycles: Fully programmable and independant Ability to control and measure pH: 0 – 14, may be controlled automaticly using CO2 gas Mixing: Magnetic stirrer Gas control: Computerized, CO2 or other as required Groth rate measurement: Continuous, via turbidistat Sterilization: Entire reactor vessel assembly, including culture medium, may be autoclaved on the “Liquid” cycle Turbidistatic pump: True turbidistatic operation, fully programmable from groth fase Dimensions (HxWxD): 482 x 241 x 318 mm Weight: 7kg