Martin Christ 127211 Aluminium Thermoblock 195mm 110 x Ø 11mm Tubes

Edwards T-Station 300D Wet Turbo Station CF100, 100-120V Ultimate Vacuum <5x10-12 mbar ls-1 Inlet (more) Connection DN 100 CF Leak Tightness <1x10 6 mbar l/s Features - Single dedicated button to start/stop pumps; Easy to read accurate display; - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable. - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking. - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application. Edwards T-Station 300 turbomolecular pumping station buildson the existing popular T-Station 85 platform by replacing the nEXT85Hturbomolecular pump with the nEXT300 turbomolecular pump we have extended ourportfolio and are providing a solution for customers and applications that requirea higher pumping speed up to 300 ls-1. Offering higher pumping speeds of up to 300 ls⁻¹, this solution caters to applications that demand rapid and efficient performance. The pump's cost-efficient package features a compact, modular design, ensuring both affordability and adaptability for diverse setups. Its plug-and-pump design provides a user-friendly experience, requiring no systemization or additional air cooling, and comes fully assembled for quick operation. Built with a robust, low-profile all-metal frame, it withstands rough handling and features a base plate with rubber feet for added stability. Additionally, the pump is designed for easy user serviceability, minimizing downtime and lowering the cost of ownership by allowing straightforward maintenance. INCLUDED: The Edwards T-Station 300D Wet Turbo Station CF100, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT300D Turbomolecular Pump with CF100 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

The BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level – a (more)nd thus the suction force – is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used (included). The smooth surfaces allow an easy cleaning of the systems. Max. pumping speed: 0.7 m³/h Ultimate vacuum: 150 mbar Vacuum controller: Touchpanel Control range: 150 – 850 mbar (adjustable) Collection bottle: 4l Polypropylene Max. back pressure: 1.1 bar Dimensions (LxWxH): 408 x 194 x 500 mm Weight: 7.7 kg

Dimensions (WxDxH): 650 x 600 x 1121 mm Aperture (WxH): 550 x 300 mm Velocity: 0.55m/sec Noise Level (more): 52db(A) Filter: Large Capacity Carbon

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 100 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Labconco 14-Port Manifold, 24.3" w x 10.6" d x 10.3" h, for use with FreeZone Console Freeze Dryers  (more)14-Port Manifold Type 304 stainless steel manifold 14 neoprene valves with plastic knobs accommodate both 1/2 in. and 3/4 in. adapters For use with 6L, 12L, or 18L FreeZone Console Freeze Dryers Freeze Dryer, glassware, and adapters are required (not included) Includes one latching pin INCLUDED: The Labconco 7201900 14-Port Manifold, 24.3" w x 10.6" d x 10.3" h, for use with FreeZone Console Freeze Dryers includes: - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Meet your lab’s specific needs with outstanding flexibility and performance with the easy-to-use The (more)rmo Scientific MultiDrop Combi Reagent Dispenser, designed to support the varied requirements of pharmaceutical and biotechnology laboratories. It combines the most versatile features for reagent dispensing with excellent performance for drug discovery or genomic and proteomic assays. Dispensing volume: 0.5 to 2500µl Dimensions (WxDxH): 360 x 330 x 220 mm Weight: 9 kg