Labconco 7522800 12-Port Drying Chamber

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Frontier 5306 minimizes noise and interruptions in the laboratory: low input voltage power, sile (more)nt brushless motor and a rubber base that absorbs vibrations. Operator safety: rotor imbalance sensor and two safety switches that immediately stop the rotors if the lid remains open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without pressing any buttons. Operation AC power (included) Structure Silent brushless motor, small footprint Construction features Easy to install design Technical features Speed ​​range: 0 rpm – 6.000 rpm Maximum relative centrifugal force: 2.000 g Maximum flow rate (rotor): 8 x 1,5/2,0 ml Program memories: 0 Acceleration gear: 1 Deceleration gear: 2 Lid lock: mechanic Noise level: ≤60 ± 2 dB (A) Rotor Compatibility: Angled 8 x 1.5 / 2.0ml; Angled 4 x 8 PCR strips Execution time: continuous Safety certification: CE; FCC; TUV The Ohaus Frontier 5306 minimizes noise and interruptions in the lab: low input voltage power, a quiet brushless motor, and a vibration-absorbing rubber base. Operator safety: rotor imbalance sensor and two safety switches that stop the rotors immediately if the lid is left open during use. Unprecedented ease of use: just place the sample in the centrifuge, close the lid and the centrifuge will start spinning without the need to press any buttons. The KIT includes two rotors, described below. Maximum relative centrifugal force (x g) at 2,560 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 45 mm. Maximum relative centrifugal force (x g) at 2,260 g; top speed at 6,000 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 32 mm. TECHNICAL FEATURES Speed ​​range: 0rpm – 6,000rpm. Maximum relative centrifugal force: 2,000 g. Maximum flow rate (rotor): 8 x 1.5/2.0ml. Program memories: 0. Rotor Pack: 8 x 1.5ml/2.0ml Angled Rotor; angled rotor 4 x 8 PCR strips. Accelerator gear: 1. Deceleration gear: 2. Screen (2): without display. Lid lock: mechanical. Net weight: 1.1kg. Noise level: ≤60 ±2 dB(A). Rotor Compatibility: Angled 8 x 1.5/2.0ml; angled 4 x 8 PCR strips. Rotor recognition method: not applicable. Runtime: Continuous. Safety Certification: CE; FCC; TUV.

RS 232 cable: scale (PUE C/31/H indicator) - computer. Lenght 2 m. Cable types: Standard P0259.2: 2  (more)m Customized P0259.5 (extra charge): 5 m Customized P0259.10 (extra charge): 10 m Compatible with: Scales operated via PUE H315 indicator Scales operated via PUE H315/Z indicator PUE H315 indicator PUE H315/Z indicator

Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) Eppendorf F-45-30-11 Fixed Angle Ro (more)tor never used, new in opened box. Capacity of 30 x 1.5/2ml. The F-45-30-11 is used in the Eppendorf 5804, 5804R, 5810, and 5810R Benchtop Centrifuges. INCLUDED: The Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-30-11 Rotor SpecificationsMax Speed14,000 RPMMax RCF20,800 x gMax Capacity30 x 1.5/2 mL

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM Speed Range 10 to 100 RPM Number of Rollers 6 Roll (more)ers Roller Length 11.02 in. Features - Features a speed range of 10 to 100 RPM for precise mixing control - Accommodates up to 5 sample tubes simultaneously, increasing lab efficiency - Each roller measures 11.02 inches, suitable for a variety of sample sizes - Provides accurate and consistent speed adjustments - Ideal for mixing blood samples, viscous substances, and preventing coagulation - Designed to withstand the rigors of continuous laboratory use The MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM is a versatile and efficient mixing solution designed for laboratories that require gentle yet thorough mixing of samples. Featuring dual rocking and rolling modes, this tube roller is ideal for a variety of applications, including mixing blood samples, handling viscous substances, and preventing blood coagulation and immune precipitation. With an adjustable speed range of 10 to 100 RPM, the MS-RE100A ensures precise control over mixing processes, accommodating a wide range of sample viscosities and mixing needs. The six-roller design, each with a length of 11.02 inches, allows for the simultaneous mixing of multiple tubes, enhancing productivity in busy lab environments. Equipped with a brushless DC motor, the MS-RE100A provides reliable, maintenance-free operation and supports a maximum loading weight of 8.8 lbs. The tube roller's compact dimensions (18.4 x 9.8 x 4.0 inches) and lightweight design (12.1 lbs) make it easy to integrate into any laboratory setup. Its simple speed display and electronic speed control ensure accurate and consistent performance. With electrical requirements of 110-220V and 25W power consumption, the MS-RE100A is an energy-efficient choice for labs seeking to optimize their mixing capabilities without sacrificing space or power. This tube roller is an indispensable tool for labs focused on achieving consistent and precise mixing results across a variety of sample types. INCLUDED: The MARSHALL Select MS-RE100A Tube Roller, 10-100 RPM includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.