Labconco 7464300 CentriZap Strobe Light

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND MD 4C NT +2AK Chemistry Vacuum System Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumpin (more)g Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - Outstanding chemical resistance and superior vapor tolerance. - Exceptionally high performance even at low vacuum. - Excellent ultimate vacuum even with gas ballast. - Whisper quiet and very low vibration. - Separators at inlet and outlet to collect condensates. This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories that do not require condensation of solvent vapors at the outlet. This system is well proven for high vacuum requirements with high boiling solvents. Typical applications are vacuum concentrators, rotary evaporators and drying ovens. The separator at the inlet (AK), made of glass with a protective coating, retains particles and liquid droplets. The catchpot at the outlet collects condensate, avoids condensate backflow towards the pump and reinforces the whisper-quiet operation of the pump.INCLUDED: VACUUBRAND MD 4C NT +2AK Chemistry Vacuum System includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco RapidVap N2/48 Evaporation System with RS-232 LinkRapidVapN2/48 Evaporation Systems use nit (more)rogen blow down, vortex motion and heat tospeed evaporation of up to 48 small samples or eight 450 milliliter samples atonce. A stream of nitrogen or dry gas is directed downward onto the surface ofthe sample. Nitrogen blow down reduces the partial pressure directly over theliquid to speed evaporation and help remove the solvent as it evaporates. TheseSystems may be used to prepare samples for applications such as drug developmentand metabolism, bioresearch, combinatorial chemistry, environmental testing,forensics and toxicology. There are eight clusters of six ports each. Nitrogen may be delivered to 2, 4,6 or 8 clusters at once so that nitrogen is conserved when a full load is notrequired. Microprocessor-controlled vortex motion increases surface area forfaster evaporation while continually mixing the sample to maximize recovery.Utilizing a dry block heating method, RapidVap N2/48 Systems provide a morereliable alternative to maintenance-intensive, contamination-prone water baths.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose (6 ft.) - Clamp - Manifold Guide x 3 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle 1000ml round bucket for Z496-1000-AC 2/pk The Hermle 1000ml round bucket for Z496-1000-AC 2/p (more)k is an integral part of the Hermle Z496-1000 / Z496-100-AC rotor system. This bucket is specifically designed to hold samples up to 1000ml in volume, providing a large capacity for processing samples in high-speed centrifugation applications. With the ability to reach a maximum speed of 4,600 RPM and a maximum relative centrifugal force (RCF) of 5,203 x g, this bucket can handle even the most demanding applications. The bucket is made from high-quality materials, ensuring its durability and longevity even with repeated use. Its round shape and precise dimensions enable efficient and uniform distribution of samples, leading to reliable and reproducible results. Furthermore, the bucket is designed to be easy to install and remove from the rotor, simplifying the process of loading and unloading samples. INCLUDED: The Hermle 1000ml round bucket for Z496-1000-AC 2/pk includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V offers precise temperature control for a wide range of laboratory applications. With a temperature range from 0°C to +70°C and a setting accuracy of 0.1°C, this incubator ensures reliable and consistent results. Its energy-saving Peltier heating/cooling system is designed for efficiency, while the advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display makes operation intuitive. The SetpointWAIT function ensures that processes begin only once the set temperature is reached, providing additional accuracy and peace of mind. This 32-liter incubator features a corrosion-resistant stainless steel interior and a textured stainless steel exterior, ensuring durability and long-lasting performance. The unit is equipped with an adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety, while the autodiagnostic system offers fault analysis. With a maximum chamber load of 132 lbs and support for up to three shelves, the IPP30 is designed to handle a variety of samples, making it an ideal solution for laboratories that require precise, reliable, and energy-efficient incubation. INCLUDED: The Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Magnetic Hotplate, ceramic-glass plateLarge volume: Up to 3 (more)0L of liquid on 10-inch hot plate with powerful magnetic stirringGlass ceramic work plate provides excellent chemical resistant performance and efficient heat transfer.LCD display for precise monitoring of speed and temperature. Liquid temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C.Digital speed control of 100~1500 rpmMax. heating plate temperature 500°CThe "Hot" warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off.Free SD card records the instrument's running data in real time.Timing function: the run time of the instrument can be set. Click Here to View Product Video INCLUDED: The SCILOGEX SCI500H-Pro LCD Digital 10 x 10 Magnetic Hotplate, ceramic-glass plate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 3/4" connection For processing sample (more)s with low eutectic points. Trap connects in series with a freeze dry system or vacuum evaporation system and vacuum pump to prevent contaminants from migrating into the vacuum pump. An insulated well, when dry ice and solvent are added, cools to approximately -75C (-103F). When used alone, Dry Ice Secondary Trap may serve as an inexpensive collector. Simply connect a sample directly to the incoming port and add a vacuum pump to the outgoing port. Dry ice and solvent, such as alcohol, are required (not included). Features Trap will cool to approximately -75C (-103°F) with dry ice and solvent in its removable well Can be used as an inexpensive collector: connect a sample to incoming port, vacuum pump to outgoing port, and system is complete Stainless-steel, with cover INCLUDED: The Labconco 7538000 SecondaryVacuum Trap, 2L, 9-3/4" h x 7-7/8" dia. with 3/4" connection includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty