Lab Oven STE-N 120 FALC Basic

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2022 Tested at 37 ° C and -2 ° C

Additional technical features: - External structure in steel painted with antiacid epoxy powder - In (more)ner chamber in stainless steel - 45 mm hole on the rear side for flue gas discharge with device for opening / closing the passage of cables, probes, etc. - 10 mm hole on the upper side for inserting the thermometer or probes - Temperature control with microprocessor - Adjustable safety thermostat - Safety class 3.1 - 4 work programs of 8 segments - Repeatability With the optional software you can control the operation of the programs in a very simple way and have all the data under control. Specifically, you can: - Create charts - Archive the history - Check and see all processes on a graph - Optimize times Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel

Carbolite Furnace Oven ELF 11/14 1100˚C Temp 3Kw Lab This item was removed from a university where i (more)t was surplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition internally and externally.

Memmert VO101 Vacuum Oven 101L, 230V Temperature Range Ambient +5°C to 200°C Vacuum Range 5 to 1100 (more) mbar Chamber Volume 101L (3.6 cu. ft.) Features - Direct contact between load and heatable thermoshelves ensures rapid and uniform temperature control - Digital pressure control for rapid, gentle drying, optimizing process safety for delicate materials - Optional speed-controlled vacuum pump available, enhancing energy efficiency by approximately 70% - Multi-level heating and sensing system with individually placeable, calibratable thermoshelves for precise temperature adjustments - VDE-tested anti-splinter door construction enhances safety across all operational models - Constructed from high-quality, rust-resistant stainless steel for durability and ease of cleaning - User-friendly operation with intuitive AtmoCONTROL software programming - Integrated data logger and multiple interface options for comprehensive documentation and control - Energy-saving features and chemical-resistant components extend service life and reduce operational costs The Memmert VO101 Vacuum Oven 101L, 230V stands as a pinnacle of efficiency and precision in the field of vacuum drying. Designed for diverse applications such as drying food, cosmetics, electronic components, and more, this oven guarantees rapid and uniform temperature control through its direct contact between the load and heatable, removable thermoshelves, ensuring no heat loss. This model features digital pressure control that facilitates rapid yet gentle drying, optimizing the process for delicate materials. The VO49 is engineered with a multi-level heating and sensing system, which includes individually placeable thermoshelves equipped with separate sensors for accurate temperature control and short process times. This system reacts dynamically to different loads or humidity levels, maintaining a constant set temperature crucial for effective vacuum drying. Additionally, each thermoshelf can be individually calibrated to meet specific testing requirements. While the VO101 oven itself is robust and reliable, it is worth noting that the speed-controlled vacuum pump, which enhances the system's energy efficiency by approximately 70%, is available as an optional accessory and is not included as standard. This pump is designed to be chemical-resistant and operates with a low final vacuum of up to 2 mbar, significantly extending the service life of membranes and reducing operational costs. Constructed from high-quality, rust-resistant stainless steel that is easy to clean, the VO101 offers a user-friendly and intuitive operating experience. It is fully programmable via the AtmoCONTROL software, comes with an integrated data logger, and multiple interface options for comprehensive programming and documentation. This makes the Memmert VO101 Vacuum Oven a versatile and essential tool for any lab needing precise and efficient vacuum drying capabilities. INCLUDED: The Memmert VO101 Vacuum Oven 101L, 230V includes: - 1 x Thermoshelf - 2 x Locking Hooks for Thermoshelf - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN30plus Natural Convection Oven 32L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 32 L (1.1 cu. ft.) Features - 32L internal volume accommodates various sample sizes for lab versatility - TwinDISPLAY with dual high-definition TFT-color displays for precise control and monitoring - Temperature range from +20°C to +300°C with accuracy up to 99.9°C: 0.1, from 100°C: 0.5 - 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring and error prevention - Natural convection ensures uniform heat distribution for delicate samples - Pre-heated fresh air admixture with electronically adjustable air flap for consistent temperature control - Digital timer adjustable from 1 minute to 99 days for flexibility in lab processes - AutoSAFETY with over- and undertemperature monitoring to ensure protection and safe operation The Memmert UN30plus Natural Convection Oven 32L, 115V is a versatile and precision-engineered solution for temperature control in laboratory and industrial settings. With a 32L internal volume, this oven provides ample space for a variety of sample sizes while maintaining a temperature range from +20°C to +300°C. The oven’s advanced TwinDISPLAY system, featuring dual high-definition TFT-color displays, allows for precise monitoring and easy adjustments. Equipped with two Pt100 sensors in a 4-wire circuit, the UN30plus ensures consistent temperature accuracy, protecting your samples through mutual monitoring and error prevention. This oven also features natural convection for uniform heat distribution, ideal for delicate samples, along with a pre-heated fresh air admixture controlled by an adjustable air flap for optimal temperature stability. The digital timer, adjustable from 1 minute to 99 days, offers flexibility in various applications, while the AutoSAFETY system provides integrated over- and undertemperature protection for maximum safety. The easy-to-clean stainless steel interior, reinforced by ribbing, is corrosion-resistant, making the Memmert UN30plus both robust and reliable for continuous lab use. INCLUDED: TheMemmert UN30plus Natural Convection Oven 32L, 115V includes: - 1 x Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN160plus Natural Convection Oven 161L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 161 L (5.7 cu. ft.) Features - 161 L (5.7 cu. ft.) internal volume for large sample capacity - Working temperature range from at least 5°C above ambient up to +300°C - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and 2 high-definition TFT-color displays - Precise temperature control with 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring - Digital timer with backwards counter, adjustable from 1 minute to 99 days - Easy-to-clean stainless steel interior, reinforced by deep drawn ribbing with integrated heating on four sides - AutoSAFETY system with over- and undertemperature monitoring "ASF", alarm and automatic heating cutoff - Two stainless steel grids included, with a maximum chamber loading of 462 lbs (210 kg) The Memmert UN160plus Natural Convection Oven 161L, 115V is a high-performance unit designed for precise temperature control and versatile applications in scientific and industrial settings. Equipped with an advanced TwinDISPLAY system featuring two high-definition TFT-color displays, it allows for seamless adjustments of temperature, time, and air flap positioning. The oven operates within a temperature range of +5°C above ambient up to +300°C, offering a high level of accuracy with its 2 Pt100 sensors DIN Class A, ensuring reliable and consistent performance across multiple applications. Built with a robust stainless steel interior, the Memmert UN160plus is easy to clean and durable enough for demanding environments. The unit includes AutoSAFETY features that provide over- and under-temperature monitoring, automatic heating cutoff, and visual and acoustic alarms for enhanced safety. Its spacious 161L chamber accommodates up to 462 lbs, making it ideal for large sample loads, while natural convection ensures even heat distribution. This oven is perfect for laboratories requiring precision, safety, and efficiency. INCLUDED: TheMemmert UN160plus Natural Convection Oven 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)we were unable to test it further at our facility. It is in good cosmetic condition with some marks from use.

MVE CryoShipper 8.5 ltr with ShipsLog 3 Temperature data logger Lab This item was removed from a uni (more)versity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 21.5 (546)Outside Diameter in (mm): 14.50 (369) Also includes the following: ShipsLog 3 Temperature data logger.

DWM HPE is a combination of a checkweigher system and a labelling system, designed for weighing and  (more)marking of products of variable weight. These parameters speak for themselves: Maximum capacity: 7,5 kg Readability [d]: 1 g Throughput: up to 60 pcs./min You See Everything Even From a Distance The device has been equipped with 12-inch, colour screen and a touch pannel. It can be programmed either using a terminal or remotely, with the Label Editor and E2R Checkweigher software run. Go for the solution which you find more convenient. And you design the labels from the Label Editor. Apply the Labels the Way You Like You can adjust the label application system to particular requirements of the production process of yours (application from the top, application from the side). To meet the most demanding requirements, we can apply tamp or blow label applicators mounted on the actuator or the rotary arm. Should you need to use metal detection and rejection systems, we can equip the device with them – its modular design allows that. You Want to Know What For You Need It? Well, the answer is this: mainly for industry. The DWM labelling checkweighers are intended for industry since it requires pre-packaged products of variable weight to be marked with labels including price. Our devices’ functions are as follows: Constant-weight product labelling, Variable-weight product labelling, Single/ bulk/ pallet label printing, Product sorting, Contamination check-ups, Weighed product record, Freely configurable report module. Plus, They Conform to Worldwide Standards The DWM labelling checkweighers have type approval accordant with MID directive and are tested in accordance with OIML R51 reccomendations. The software enables creation and printout of any labels, also those that include product price. Software Tools Label Editor R02 E2R Checkweigher

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).