Ismatec MI0280 Z-1830 Peek GA-T23.JFS.B Modell 1830-000

The X-CLARITY Tissue Clearing System is an all-in-one, easy-to-use solution for electrophoretic tiss (more)ue clearing. Its unique design accelerates the removal of lipids from tissues while preserving the structural integrity of the sample. In ETC (electrophoretic tissue clearing) mode, platinum-plated electrodes generate an electric field to accelerate the removal of lipids from tissues in a highly effcient manner. A temperature control system actively cools and heats buffer to maintain consistent buffer temperatures during clearing. Buffer is constantly circulated to ensure consistent buffering capacity, temperature control, and elimination of tissue clearing byproducts. This advanced system ensures effcient, rapid, and consistent tissue clearing. Voltage: Not adjustable, max 60 V Current: 0.2 – 1.5 A, 0.1 A increments Temperature: 35 – 60°C, 1°C increments Switching time: 0 – 600 min, 10 min increments Pump speed range: 0.1 – 100 rpm, 0.1 rpm increments

S+B Plinth cabinet high DT Ice blue 1200

Polyscience P10N4A101B IP-100 Immersion Probe Cooler, 0.625 Flexible Cold Finger Probe, -100 to -60C (more), 120V, 60Hz3D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;} PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P10N4A101B IP-100 Immersion Probe Cooler, -100°C to -60°C, 85W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA ULTRA-TURRAX Tube Drive Speed Range 300 to 6,000 RPM Viscosity max. 5000 mPas Speed deviation 10 (more)% Features - Capable of dispersing, stirring, homogenizing, and grinding with sealable disposable tubes - Ensures protection against infectious, toxic, and high-odor samples with no cross-contamination - Suitable for both individual and serial use, with gamma-sterilized tubes for sterility - Tubes available as additional accessories in volumes of 2 - 15 ml and 15 - 50 ml, featuring pierceable membrane covers - Offers reproducible tests under patented technology - Includes a removal hook for convenience - Maximum viscosity handling up to 5000 mPas, with stepless speed adjustment - Supports a voltage range of 100 - 240 V and a frequency of 50/60 Hz Unique and universal dispersing, stirring, homogenizing and grinding system with sealable disposable sample tubes. Protection and security for: Infectious sample materials, toxic substances, high-odor substances under defined conditions (time, energy, volume). For research purposes only! Not suitable for diagnostic use (in accordance with the IVD Directive).INCLUDED: The IKA ULTRA-TURRAX Tube Drive includes: - IKA ULTRA-TURRAX Tube Drive - Removal hook - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 4 x 100 Swing Out Rotor The Hermle 4 x 100 Swing Out Rotor is for use with the Z306, Z326, an (more)d Z326 K centrifuges and offers speeds up to 4,500 RPM with a max RCF of 3,350 x g. INCLUDED: The Hermle 4 x 100 Swing Out Rotor includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HACH LANGE LT 200 DCO heating block Model: LTG082.01.23002 LT200 Temperature: 37 to 150°C per 1°C Ti (more)me: 0-480 mins Heating: from 20°C to 150°C in 10 minutes Stability: +/-1°C Dimensions HxWxD: 145x250x310 mm Power supply: 220 V - 50/60 Hz - 600 VA Safety: maximum insulation, transparent protective cover locks, audible signal at end of program For 30 Ø13mm tubes Equipment tested at 120°C

This Zeiss Axiophot Microscope w/ 5 x Zeiss Plan-NEOFLUAR Objectives was removed from a university l (more)ab where it was surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The microscope has been professionally serviced and is in full working order. The report is available on request. The fluorescence bulb was removed due to unknown lifespan. The system consists of: 1 x Zeiss Axiophot Microscope body.2 x Zeiss 45 60 70 03 Cameras.1 x Zeiss 44 64 21 3FL Fluorescence Cube Slider.1 x Zeiss 45 36 70 Ph Slider.1 x Zeiss 45 35 02 Mechanical Stage.1 x Zeiss 44 53 67 + 44 53 25 Condensor.1 x Zeiss 44 72 16 Lamp With 1 x Zeiss 39 26 42 Power Supply (Showing 06254.34 Run Hours).1 x Zeiss 44 72 17 Lamp. It also has 5 x Objectives: 1 x ZEISSPlan-NEOFLUAR63x/1,25 Oil44 04 61Ph3∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR40x/0,7544 03 51Ph2∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR20x/0,5044 03 41Ph2∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR10x/0,3044 03 31Ph1∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR5x/0,1544 03 20∞/0,17 And 2 x Zeiss Pl 10x/25 Eyepieces.

Memmert IF450 Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 449 L (15.9 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF450 Forced Circulation Incubator 449L, 115V offers precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its large 449 L (15.9 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning, making it ideal for large-scale applications. The advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display allows users to adjust various parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time, providing optimal control over the incubation process. This incubator features quiet forced air circulation with a turbine, adjustable in 10% increments, ensuring even temperature distribution and pre-heated fresh air admixture. Safety is ensured through an adjustable overtemperature monitor and mechanical temperature limiter TB, meeting DIN 12880 standards. Additional features include AtmoCONTROL software for advanced programming and data management, with support for up to 8 shelves and a maximum chamber load of 661 lbs. The IF450 combines high capacity, safety, and precision, making it suitable for demanding laboratory environments. INCLUDED: The Memmert IF450 Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Gilson MyPIPETMAN Select P10, 1-10 uL, Metal Ejector PipetteFeatures - Designed to be ergonomic, saf (more)e, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 1 to 10 uL - 3 Year Manufacturer's Warranty