IKA ULTRA-TURRAX Tube Drive P control

This listing is for 1 of 2 Grant Instruments DEN-1 DensitometerGrant Instruments DEN-1 is a compact  (more)benchtop densitometer (suspension turbidity meter) for measuring the turbidity of cell suspensions in a variety of life science applications. The densitometers are designed and factory calibrated to measure turbidity in the range of 0.5 to 4.0 McFarland units with a small standard deviation.

Ohaus DFD32M2500ER Defender 3000 Drum Floor Scale, 2500 lb., 0.5 lb. Maximum Capacity 2500 lb. (1,25 (more)0 kg) Readability 0.5 lb. (0.2 kg) Platform Size 36 x 36 in. (914.4 x 914.4 mm) Features - Weighing, Counting Parts, Checkweighing, Accumulation, Dynamic/Display Hold - Backlit liquid crystal display (LCD) - AC adapter with Auto Shut-off feature - Easy access communication port including RS232 interface - Constructed of mild steel with an epoxy paint finish - Convenient portability with polyurethane wheels - Low-profile design - 2 Year Manufacturer's Warranty

This listing is for a Grant Instruments PV-1 Vortex MixerIdeally sized for personal use, the Grant-b (more)io PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes.Adjustable speed control: 750 to 3000 rpm‘Continuous’ or ‘touch’ operationFor tubes up to 20 mm diameterPressure sensitive cup accommodates tubes up to 20mm diameterReliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed rangeExtremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpmIn ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup.Exceptionally compact with a low profile and small footprint – fits into almost any locationRubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

The FP403 + FP404 model is an analyzer specially designed for in-line oxygen and CO2 measurements on (more) both horizontal and vertical flow packaging machines. Very easy to use and adapt to any mounting configuration.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

VACUUBRAND VACUU-PURE 10C Screw Pump Ultimate Vacuum 0.005 mbar (0.0038 Torr) Maximum Pumping Speed (more) 5.3 CFM Inlet/Outlet Connection Small Flange KF DN 25 Features - 10-3 mbar vacuum range - 100% oil-free - Chemically resistant - No wear parts The dry screw pump VACUU-PURE® 10C reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10-3 mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts. VACUU-PURE 10C is ideally suited for clean processes and the production of pure products. The screw pump is especially designed for processes in the vacuum range down to 10-3 mbar, however unlike other fine vacuum technologies it can be used across the entire pressure range from atmospheric pressure to its ultimate vacuum. At the same time, aggressive gases and vapors can be pumped without any worries because of the high chemical resistance. The use of a cold trap is no longer necessary in most applications. VACUU-PURE easily handles high vapor loads through its extraordinary condensate compatibility. Thanks to this capability, a gas ballast is unnecessary, avoiding associated disadvantages like the reduction in pumping speed and an increase in noise levels. The integrated regeneration mode enables rapid drying of the pump at the end of the process. This allows sample throughput to be increased significantly as compared to other pump technologies. INCLUDED: The VACUUBRAND VACUU-PURE 10C Screw Pump includes: - 2 x Centering Rings - 2 x Clamping Rings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson PIPETMAN G Multichannel P8x200, 20-200 uL Pipette Designed PIPETMAN G brings a new level of c (more)omfort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P8x200, 20-200 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Series N 811 diaphragm pumps are single-head, dry-running devices used in a wide range of laboratory (more) applications. They transfer, compress and pump down without contamination. The heart of these very compact pumps is a KNF structured diaphragm. This patented diaphragm was stress-optimized using the Finite Elements method. Delivery: 11.5 l/min Ultimate vacuum: 240 mbar Operating pressure: 2 bar Dimensions (LxHxW): 187 x 157 x 90 mm Weight: 2.5 kg

Temperature range: -5°C to -25°C Content: 125 L Dimensions (WxDxH): 595 x 640 x 830 mm Weight: 43 kg (more) Explosion proof Possible options can be ordered at extra cost (see image)