Hermle 8 x 10ml insert, 2/pk.

Accuris PR3101-S-4 100mM dNTP Set, dATP, dGTP, dTTP, dCTP, 1ml/100µmol of Each The success of your P (more)CR reaction depends on the quality of the starting materials. Accuris dNTP’s are purified by HPLC in a strict process that results in greater than 99% purity. The stringent purification process eliminates PCR inhibitors such as tetraphosphates and pyrophosphates that can interfere with the sensitivity of your PCR and reduce yields. Extensive quality control testing is performed to ensure the dNTPs are free of nuclease, protease and nickase activity. Each lot is performance tested in standard PCR, long PCR and qPCR reactions to assess reproducibility and sensitivity. The 40mM dNTP Mix is a single tube that contains premixed dNTPs at a concentration of 10mM each. The 100mM dNTP Set contains four individual tubes, one each of dATP, dCTP, dGTP and dTTP. The nucleotides are supplied in ultra-pure water as an ammonium salt. Both the set and mix are stable for 24 months when stored at -20ºC. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - 100mM dNTP Set, dATP, dCTP, dGTP, dTTP, 1ml/100μmol each - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 14 x 2.6-8ml Adapters, Cat. # 5804789008 The Eppendorf 14 x 2.6-8ml Adapters, Cat. # 58047 (more)89008 are for use with the Eppendorf S-4-72 Swing Bucket Rotor for the Eppendorf 5804/R and 5810/R Centrifuges. These adapters feature a capacity for 14 x 2.6-8ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 13mm x 115mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 14 x 2.6-8ml Adapters, Cat. # 5804789008 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 14 x 2.6-8ml Adapters, Cat. # 5804789008 SpecificationsBottom ShapeRoundRotor CompatibilityEppendorf S-4-72 Swing Bucket Rotor

Polyscience MX15H135-A11B 15L Heated Circulator, MX (Ambient +10 to 135C), 120V, 60Hz3D Visualizatio (more)n of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features Large, universal icon and English display On-screen prompts Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience MX15H135-A11B 15L Heated Circulator, MX (Ambient +10 to 135C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Water bath unstirred thermostatic

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-06051 Glass Fiber FiltersITEM-06367 2 Boxes PP Deepwell PlatesITEM-06378 Box of Bio-Rad Rehydration TraysITEM-11176 2x Laboratory Glass Beakers Lab EquipmentITEM-11177 Corning 250 mL Polycarbonate Erlenmeyer Flask with Vent CapITEM-11929 Lot of Small Glass Sample BottlesITEM-15584 Desiccator & Spare LidITEM-37221 Thermo Scientific 8179 Rotor & BucketsITEM-37233 12 x Kendro Sorvall Tube bottle AdaptorsITEM-37234 Mix of Small GlasswareITEM-37235 Box of Hybaid Glass TubesITEM-37236 Box of Gilson consumablesITEM-37256 UVP Mineralight lampITEM-37257 3uv TransilluminatorITEM-37258 Sunavo Single burnerITEM-45225 Box of Generic white small packaging boxesITEM-45229 2x Tripp-lite IsobarITEM-45232 Mitsibishi P95 PrinterITEM-45246 Various carouselsITEM-45247 APC Back Ups ES 700ITEM-45250 tubesITEM-45253 2x LightboxesITEM-45386 ITESanyo ABC-VW24A Air PurifierITEM-45399 F-300 Impulse heat sealerITEM-45400 DarkReader TransilluminatorITEM-45401 MX-T6-S Roller MixerITEM-45402 Fisons WhirliMixerITEM-45563 Heidolph MR 3001 KITEM-45565 Fisher Scientific DP2000ITEM-45566 Capex 2DCITEM-45567 iBlot InvitrogenITEM-45568 Eppendorf Centrifuge 5415 DITEM-45569 AnalyTikjena UVP Visi-Blue TransilluminatorITEM-45570 Kodak Coldlight Illuminator Series 2ITEM-45572 Heraeus Biofuge FrescoITEM-45573 IKA KS501 Digital

Memmert IN160 Natural Convection Incubator 161L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 161 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for both set point and actual temperature readings - Adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing - SetpointWAIT function initiates process timing only once the set temperature is reached - AtmoCONTROL software enables seamless data management and programming via Ethernet - Durable, easy-to-clean stainless steel interior with reinforced ribbing for enhanced reliability - Inner glass door allows for easy sample monitoring without disrupting the internal environment - Built-in autodiagnostic system with adjustable overtemperature monitor for added safety The Memmert IN160 Natural Convection Incubator 161L, 115V is designed to deliver precise temperature control and reliable performance for a wide range of low-temperature applications. With a generous 161 L (5.6 cu.ft.) chamber, this unit is ideal for versatile sample storage. The temperature range extends from 5°C above ambient to +80°C, controlled by a high-resolution display with 0.1°C accuracy for both set points and actual values. Key adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing, enhanced by the SetpointWAIT function, which begins process timing only when the set temperature is reached. For added convenience, AtmoCONTROL software provides efficient data management and programming via Ethernet. The durable stainless steel interior, reinforced with ribbing for longevity, is both easy to clean and corrosion-resistant. With an autodiagnostic system and adjustable overtemperature monitor, this incubator combines safety, functionality, and durability to meet rigorous lab requirements. INCLUDED: The Memmert IN160 Natural Convection Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Mild steel powder coated weighing platform We provide you with mild steel powder coated weighing pla (more)tforms with readability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms have a square shape of 300 x 300 mm or a rectangular shape of 400 x 500 mm or 500 x 700 mm. Use the potential Our platforms can work with one of eight weighing terminals to choose from: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. The frame is made of mild steel. Mild steel powder coated weighing platforms are marked by a high degree of protection IP 65.