Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed

0

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60HzFeatures - Timed dispense for unatte (more)nded operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000620 WaterPro PS/HPLC Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Hersteller: Sartorius  Modell: MSA6202S  Beschreibung: Die MSA-Anzeige- und Bedieneinheit eignet sic (more)h hervorragend zum Betrieb der Cubis Waage.e. Der Touchscreen und das hochauflösende Grafikdisplay bilden eine ideale Anzeige- und Bedieneinheit für höchste Ansprüche.Hierbei handelt es sich bei den Cubis MSA-Modellen um eine intelligente Warnfunktion, die jede Steigerung sofort erkennt.rkennt. Klare Anweisungen zur Einstellung auf dem Display helfen dem Benutzer bei der Nivellierung dDrei Standarddatenschnittstellen, Ethernet mit integrierten Webservices, USB-Schnittstelle zum PC und RS232C-Schnittstelle für Sartorius Zubeh, sorgen für eine perfekte Kommunikation.ör/Drucker. Bluetooth, neunpolige R232SC PC- und PS/2-Sc sind optionale Schnittstellen.Hnittstellen. Spannung 100 – 240 V, 50 – 60 Hz. B. ein AC-Adapter. Der eingebaute SD-Kartenleser ermöglicht es, Wägedaten, Anwenderprofile, Aufgabenkonfigurationen und Einstellungen von einer Waage auf eine andere oder einen Computer zu übertragen. - Schwenk- und abnehmbare Anzeige- und Bedieneinheit - Kompensiert exzentrische und außermittige Beladungsfehler - Windschutz mit Motor - Mit Passwortschutz - Prüfprotokollfunktion - GLP-konform - Optionale motorbetriebene Nivellierfunktion - Umrechnung von Masseneinheiten - Zeitgesteuerte Funktionen - Zweiter Tara-Speicher Technische Daten: Anschlusstyp: RS-232 25-polig / Bluetooth / RS-232 9-polig, inkl. PS Displaytyp: Hochauflösendes Farb-TFT für kontrastreiche Darstellung Format: Kilogramm Ausgleichen: Unterstützt Messzeit: ≤1 s Modell: MSA6202S Wiederholgenauigkeit: ≤±7 mg Temperaturbereich (metrisch): 5 bis 40 Grad Celsius Typ: Präzisionswaage Breite (metrisch): 193 mm Höhe (metrisch): 172 mm Tiefe (metrisch): 191 mm Elektrische Anforderungen: 100/240 V 50/60 Hz 1 A 7 w 15 VDC ±5% Wirkleistung: 7 W Frequenz: 50/60 Hz Ecklast: 20 mg Lesbarkeit: 10 mg Luftfeuchtigkeitsbereich: 50 bis 80 % RH Linearität: ≤±20 mg Min. Probengewicht: 10 g Bereich: –6200 g Stabilisierungszeit: 1 s Testlast: 2000 g Abmessungen (T x B x H): 191 x 193 x 172 mm Breite (metrisch) Schale: 206 mm Höhe (metrisch) Kammer: 172 mm Tiefe (metrisch) Schale: 206 mm Spannung: 100/240 V Stromstärke: 1 A Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.

Lot of WestBart Cryogenic Laboratory Chest Freezer Racking This was removed from a university lab w (more)here it was surplus to requirements. Included are the following; The Different Sizes of racking - 22 X 3 Shelves  External Dimensions - 14 x 14 x 56Internal Dimensions - Per Shelf 3 X - 14 x 14 x 25 - 8 X 10 Rod Shelves External Dimensions - 14 x 14 x69Internal Dimensions - Per Shelf 10 X - 14 x 14 x 6 - 8 X 8 Shelves with open sides  External Dimensions - 14 x 14 x 67Internal Dimensions - Per Shelf 8 X - 14 x 14 x 8 - 4 X 4 Shelves  External Dimensions - 56 x 14 x 42Internal Dimensions - Per Shelf 4 X - 56 - 14 - 10 - 4 X 7 Shelves External Dimensions - 56 x 14 x 42Internal Dimensions - Per Shelf 4 X - 56 - 14 - 6 - 1 X 7 shelves with notches External Dimensions - 56 x 14 x 42Internal Dimensions - Per Shelf 4 X - 56 - 14 - 6 1 X 1 shelf with 4 Side vents External Dimensions - 55 x 14 x 24Internal Dimensions - 47 x 14 x 18 1 X 40 Shelf Slots External Dimensions - 16 x 14 x 46Internal Dimensions - 16 x 14 x 42

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Ohaus EX124/AD Explorer Analytical Balance Introducing the OHAUS EX214/AD Explorer Balance: high-per (more)formance laboratory equipment that redefines the standard for analytical balances. This top-tier balance is part of the OHAUS Explorer Series, a unique line that seamlessly combines modern features with an intelligent design, promising to simplify even the most complex laboratory measurements.The EX214/AD Explorer Balance stands out with its large color touchscreen, providing intuitive navigation and convenient access to the system's advanced application modes. It has an icon-driven application software that includes features such as user management, a comprehensive library, and a minimum weight indication. These smart features make the balance not just a tool but a helpful assistant in your laboratory work.The Explorer Balance prioritizes accuracy with its fast stabilization times, optimized linearity, and excellent repeatability specifications. It includes enhanced vibration filtering, which guarantees precise results under different working conditions. Another standout feature is the AutoCal™ calibration system, ensuring the accuracy of your measurements is maintained over time and across a wide range of environmental conditions.The EX214/AD model incorporates an ingenious draftshield that offers easy entry to the weighing chamber. This draftshield can be accessed through a flip or sliding top door and the top-mounted side doors. Notably, these doors can be automatically controlled in /AD models, offering additional convenience and efficiency to your weighing process.Discover the future of laboratory measurements with the OHAUS EX214/AD Explorer Balance, a high-performance balance that offers unmatched functionality, ensuring precise and reliable results every time.INCLUDED: The Ohaus EX124/AD Explorer Analytical Balance includes: - Power Cord - One Year Manufacturer's Warranty

Motic BA210 LED Digital Compound Microscope Magnification Range 4x to 100x Optical System Colour Cor (more)rected Infinity (CCIS) Illumination 3W LED Features - Binocular head Siedentopf type, 30º inclined with Built-in digital camera CMOS 1/2” chip - 3MP - 2048x1536 pixels with USB 2.0 output - Widefield high eyepoint eyepieces N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EF-N Plan Achromatic objectives EF-N PL 4X, 10X, 40X S, 100X S Oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 0.90/1.25 with iris diaphragm and slot - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) The new Motic BA310 Digital Pro Upright Microscope is designed for the rigors of daily routine work specifically for diverse applications in Hematology and Cytology. The BA310 Digital is a version of the BA310 featuring a built-in 3.0MP sensor. The demands placed on any routine microscope for daily work needs careful focus on every microscope detail. The new BA310 series features a powerful adjustable light source to meet both delicate and detailed lighting requirements for all sample types while the fully featured Koehler illumination helps in highlighting even the weakest-stained specimens. New CCIS EF-N Plan Achromat objectives provide optimal image contrast through newly designed multi-layer lens coatings. INCLUDED: The Motic BA210 LED Digital Compound Microscope includes: - Widefield high eyepoint eyepiece N-WF10X / 20mm with diopter adjustment - Built-in Digital Live Hi-Res Imaging Chip, 2592 x 1944 Resolution USB 2.0 - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat objectives 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial mechanical stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 45mm blue filter, immersion oil (5mL), power cord, allen hexagonal key, vinyl dust cover - Built in illumination 3W LED with intensity control - Motic Images Plus 3.0 for PC and MAC - Calibration Slide - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty