Heidolph Hei-VAP Ultimate Control HL/G3B Coated Hand Lift w/ G3 Vertical Glassware

These were removed from a university lab where they were surplus to requirements. All units are new  (more)and sales. Expiry dates listed where applicable. 23x Corning 150 mL Square SterileP/N: 4314338x Corning 1 L with tube - exp. date: 19/10/2025P/N: 1144020x Corning 125 mLP/N: 43114310x Corning 150 mL Square SterileP/N: 43143093x Corning 1 LP/N: 43114710x Corning 2 L with tube - exp. date: 09/08/2025P/N: 11465

Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303The Thermo Scientific Micro (more)plate Carriers for TX-1000 Rotor, Cat. #: 75007303 are for use with the Thermo Scientific TX-1000 Rotor. These adapters feature a capacity for 4 x 6mL Standard or 4 x 2mL Deep-Well Microplate. This is a four piece set, and the adapters are new in packaging. INCLUDED: The Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303 includes: - Four 75007303 Microplate Carriers - Full 6 Month Parts and Labor Warranty Thermo Scientific Microplate Carriers for TX-1000 Rotor, Cat. #: 75007303 SpecificationsCapacity4 x 6mL Standard or 4 x 2 mL Deep-WellRotor CompatibilityThermo Scientific TX-1000 Rotors

Polyscience MX14P100-A11B 14L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60HzFeatures - (more) Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Click Here to View Product Video The Polyscience MX14P100-A11B 14L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz is brand-new . Includes: Power Cord Operator's GuideManufacturer's Documentation Full 2 Year Parts and Labor Warranty Polyscience MX14P100-A11B 14L Polycarbonate Open Bath, MX (Ambient +10 to 85C), 120V, 60Hz SpecificationsKey SpecificationsDescription14 L Open Bath SystemController TypeMXDisplay3.25" LCDLanguages SupportedEnglishWorking Temperature Range CAmbient +10° to 85°Temperature Stability C±0.07°Temperature Calibration Capability1-pointWorking Access (L x W x D) (cm)31.4 x 15.6 x 20.3 cmPump TypePressureFlammability Class (DIN 12876-1)I (NFL) Part Number MX14P100-A11BMaximum Pressure (psi)2.3Maximum Pressure (bar)0.16Maximum Pressure Flow Rate (gpm)3.60Maximum Pressure Flow Rate (l/min)13.5Included HardwareFitting Kit for External ApplicationsHeater Wattage1100Electrical Requirements (VAC/Hz/Ph/A)120/60/1/10Regulatory ApprovalsETLComparison of ModelsSpecificationPolyscience MX06S135-A11B 6L Stainless Steel Open BathPolyscience MX08P100-A11B 8L Polycarbonate Open BathPolyscience MX10S135-A11B 10L Stainless Steel Open BathPolyscience MX14P100-A11B 14L Polycarbonate Open BathPolyscience MX17P100-A11B 17L Polycarbonate Open BathPolyscience MX20S135-A11B 20L Stainless Steel Open BathPolyscience MX23P100-A11B 23L Polycarbonate Open BathPolyscience MX28P100-A11B 28L Polycarbonate Open BathPolyscience MX28S135-A11B 28L Stainless Steel Open BathWorking Temperature Range (°C)Ambient +10° to 135°Ambient +10° to 85°Ambient +10° to 135°Ambient +10° to 85°Ambient +10° to 85°Ambient +10° to 135°Ambient +10° to 85°Ambient +10° to 85°Ambient +10° to 135°Temperature Stability (°C)±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°±0.07°Working Access (L x W x D) (cm)10 x 11 x 15.2 cm10.5 x 15.6 x 20.3 cm9.9 x 25.5 x 15.2 cm31.4 x 15.6 x 20.3 cm31.4 x 15.6 x 20.3 cm26.4 x 22.8 x 15.2 cm31.4 x 15.6 x 20.3 cm31.5 x 30.5 x 20.3 cm25.7 x 21.4 x 20.3 cmVoltage (V)120V120V120V120V120V120V120V120V120VFrequency (Hz)60Hz60Hz60Hz60Hz60Hz60Hz60Hz60Hz60Hz.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Julabo MAGIO MS-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz (NRTL Cer (more)tified) Working Temperature Range -30°C to 200°C Cooling Capacity 330W at 20°C Refrigerant R449A Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in drain tap The MAGIO™ refrigerated/heating circulators are suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. Refrigeration combinations offer low temperature capabilities from -30°C to -50°C with an upper temperature limit of 200°C. The MAGIO™ MS circulator incorporates easy operation via a large color TFT touchscreen. Unit fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. A multilingual interface, integrated programmer, Pt100 port for external temperature control, RS232/RS485, USB and Ethernet connections for external PC control and data-logging. Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). PID temperature control provides ± 0.01°C stability. Infinitely variable centrifugal pressure/suction pump capacity of 16-31 L/min with pressure to 3.4-13.3 psi. Stainless steel bath tanks with integrated drain port. 115V version with 1 kW heating power; 230V version with 2 kW heating power. Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MS-310F Refrigerated Circulator with Synthetic Refrigerant (R449A), 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark IPD9600-50T Adapter for 4 x 15/50ml tubes, pack of 2 The Benchmark Scientific Adapter for  (more)4 x 50 ml Tubes, Set of 2, is an essential accessory for laboratory procedures that involve 50 ml tubes. These adapters are specifically designed to work with the IPD9600 ball mill homogenizer, providing an efficient and reliable way to homogenize samples. The adapters are made of durable materials that can withstand the rigors of laboratory use and ensure a secure fit for the tubes during the homogenization process. With their easy-to-use locking mechanism, these adapters offer a quick and convenient way to set up and remove samples, allowing for faster processing times. Whether you are working with biological samples, tissues, or other research materials, the Benchmark Scientific Adapter for 4 x 50 ml Tubes is an excellent addition to your laboratory equipment.INCLUDED: The Benchmark IPD9600-50T Adapter for 4 x 15/50ml tubes, pack of 2 includes: - Operator's Manual - Manufacturer's Warranty

Accuris F1001 Smart-Q 100 Quantitative Fluorometer Measurement Speed ≤ 5 seconds Excitation Waveleng (more)ths Blue: 460 ± 20nm and Red: 625 ± 20nm Emission Wavelengths Green: 525 – 570nm and Red: 670 – 725nm Features - Sensitive quantitation down to 0.1pg/ul ds DNA - Large color touch screen for programming and operation - Two models for single or 8-sample processing - Built-in reagent calculators for sample preparation - Compact and portable (11 x 6 inch footprint) The Accuris Smart-Q 100 and Smart-Q 800 Quantitative Fluorometers are designed for the precise quantification of DNA, RNA, and protein samples. By utilizing well-established methodologies for fluorescence detection, the Smart-Q Fluorometers provide higher specificity and enhanced accuracy compared to the traditional method of UV-absorbance detection. Accurate results are particularly crucial in workflows involving: Next Generation Sequencing, PCR, Transfection, Western blotting, and Immunoassays. The Smart-Q Fluorometers are engineered to achieve optimal performance with Accuris’ Fluorescent DNA Quantification Kits and assay tubes; however, they also maintain compatibility with a range of kits offered by various other suppliers. Each instrument is equipped with a 7-inch color touchscreen, featuring an intuitive, icon-driven user interface. Preprogrammed protocols allow for quick & effortless assay set-up. Results are quickly calculated and displayed in less than 6 seconds and saved to the instrument’s internal memory. All data can also be exported easily to a PC using a USB flash drive. The Smart-Q Fluorometers, along with their accompanying assay kits, are engineered for the precise measurement of fluorescent dye signals that are bound to targeted biological molecules. These specially formulated dyes exhibit selective affinity towards DNA, RNA, or proteins, and generate fluorescent signals exclusively upon binding to their respective targets. Both Smart-Q models include Blue and Red channels that allow for various fluorescent dyes to be used in nucleic acid and protein measurements. The Smart-Q Fluorometers incorporate advanced curve-fitting algorithms to establish calibration curves from standard samples of known concentrations. The concentration of an unknown sample, whether it be DNA, RNA, or protein, is determined by correlating its Relative Fluorescence Units (RFUs) with those of the standards employed during calibration. The measurement sensitivity for each type of assay is distinct and defined by its detection limits. INCLUDED: The Accuris F1001 Smart-Q 100 Quantitative Fluorometer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MULTISTIRRER 6 Velp multiposition magnetic stirrer MULTISTIRRER 6 is a 6-place magnetic stirrer for  (more)ø 85 mm beakers. Designed to last, these tools feature a stainless steel top that is resistant to chemical corrosion. It is possible to set a common speed up to 1500 rpm, with the electronics guaranteeing good speed regulation even at low rpm. Even after several days of operation, the instruments do not overheat, which is a highly valued feature in microbiology and biochemistry. It is possible to thermostat the samples by combining MULTISTIRRER with a recirculating water bath. ROBUST AND PRACTICAL - The control panel is protected from liquid spills - Heavy duty steel construction with epoxy coating - Stainless steel cover - Very low height - ergonomic - Lightweight, easy to move - Designed for maximum durability and backed by a 3 year warranty THE ADVANTAGES OF THE VELP MICROSTIRRER - Clear surface for viewing particles and color changes - It doesn't get hot, even after days of continuous use - Can thermostat samples using a recirculating water bath - Ideal for microtitration, microbiology and biochemistry - Soft start but quick achievement of the set speed - High power magneto 'PCM' driven by single phase motor for continuous operation

Varian Cary 300 Bio Uv-Visible Spectrophotometer with Sample Preparation System SPS 3 from 2005, inc (more)luding PC and software. It comes from a water laboratory and always neatly maintained. Due to temporary standstill, the device must first be maintained before use (including cleaning mirrors).

Mettler Toledo KF-oven sample changer Stromboli. In combination with the Karl Fischer compact titrat (more)ors C30 and V30 the Stromboli sample changer enables up to 14 samples to be titrated in unattended operation. The samples are automatically transferred into a temperature controlled oven from where the evaporated water is transferred to the titration cell via an applied gas flow.

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Maximum Robustness The HRP high resolution scales are very robust. Their platforms are recognised to have an IP 67 level of protection. They feature additional sealing elements to protect against dust, dirt, and moisture and can thus be cleaned with a pressure washer. 9 advantages The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved RADWAG MonoBLOCK technology. The new – taller and larger – RADWAG MonoBLOCK has enabled the best repeatability and speed in the class of high-resolution industrial weighing platforms. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. For such industries as pharmaceutical, chemical, food and… HY10.HRP H scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. The HY10.HRP and HX7.HRP scales whose terminals are made of stainless steel can be used even in the most demanding wet environments. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, moduł wyjść analogowych, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, HY10 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of HY10’s working mods.

Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Synthetic Refrigerant (R449A), 1 (more)15V/60Hz Refrigerant R449A Working Temperature Range -30°C - 200°C Cooling Capacity 300W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-310F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.3kW cooling power at 20 °C with 20W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-310F Refrigerated Circulator with Analog Output and Synthetic Refrigerant (R449A), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty