Heidolph Glassware Set G3

COMBISTORAGE CS260 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Ventilation and filter - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

Circulation chillers for reliable continuous operation in laboratory and research applications from  (more)-10 to 40°C The LAUDA Microcool line, simple, easy to use, consists of four compact models with large LED display and membrane keyboard, which offer cooling capacities from 0.25 to 1.2 kW. The strong point of these devices is the high-quality centrifugal pump with magnetic coupling - unique on the market for this price category: the magnetic coupling of the pump and the electric motor prevents any kind of sealing problem on the pump shaft. The MC 250 and MC 350 models easily fit on a laboratory bench. Larger models with 600 and 1200 watts of cooling capacity are also available, which can be placed on the floor under a laboratory bench to save space. In addition, the MC 1200 W, the most powerful device, is also available in a water-cooled version. Cooling power for the model Microcool MC 350 (measured with ethanol):: - at 20°C, 0.35 kW - at 10°C, 0.27 kW - at 0°C, 0.20 kW - at -10°C, 0.12 kW Notable features - Auto start timer and auto power off function - Top filling opening, drain connection on the back - Cooling capacity adapted via solenoid valve control, including automatic compressor control Examples of specific applications - Rotary evaporators - Distillation systems - Spectrometers - Supply of cooling traps - Digital print - Laser cut - Spot welding - Injection molding - Tunnel drilling machines - Centralized cooling water supply Accessories included Nozzles for pump connections; screw cap Performance graph of the pump of the LAUDA Microcool CHILLER. Simple three button control panel, with display and three LED indications: heat transfer liquid required; active cooling unit; device error. Connections on the back of the Microcool: RS232; drain screw; external alarm output. Connections on the back of the Microcools: inlet/outlet pump connection; overflow connection. Front liquid level indicator. Front cover for filling. Front panel of the Microcool LAUDA easily removable for fast filter maintenance. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Level indication 3 - Operating unit 4 - Front panel with ventilation openings 5 - Four feet 1 - Overflow connection 2 - Pump connection, outflow 3 - Pump connection, return flow 4 - Rating label 5 - Alarm output 6 - RS 232 interface 7 - Power supply 8 - Drain screw 9 - Ventilation openings 1 - Display 2 - LEDs 3 - Control buttons 4 - Main switch Liquid level indicator a - Max. level b - Min. level Pressure gauge The models with bypass (MC600 and MC1200) are equipped with a pressure gauge to read the set pressure.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dimensions (WxHxD): 600 x 600 x 580 mm

Equipped with dimmer and double fiberglass hose

Labconco 302480101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening and Ba (more)se Stand, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 302480101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening and Base Stand, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF-listed. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 302480101 4' Purifier Logic+ Class II Type A2 Biosafety Cabinet with 8" Sash Opening and Base Stand, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

IKA C 200 Measuring range max. 40000 J Measuring time dynamic approx. 8 min Measuring time isoperibo (more)l approx. 17 min Features - Suitable for educational institutions and industrial laboratories - Manual handling for water and oxygen filling - Offers four working methods: isoperibolic, dynamic, manual, time controlled - Clear and easy-to-use display - User-friendly aftersales support - Automatic mode for ignition and gross calorific value calculation - Decomposition vessel compatible with combustible crucibles (accessory required) - Can control up to eight measuring cells with optional multiserial plug-in card (PCI 8.2) The C 200-System offers a space-saving and cost-effective solution for determining gross calorific values of liquid and solid samples. It meets rigorous validation standards and is suitable for educational institutions, industrial laboratories, and technical schools alike. With manual and automatic modes, clear display, and user-friendly software, it ensures accurate measurements and streamlined data management. Plus, its compatibility with various crucibles and optional multi-cell control capability make it a versatile choice for diverse laboratory needs.INCLUDED: The IKA C 200 includes: - C 200 - C 5010 Decomposition vessel, standard - C 248 Oxygen filling station - Ignition adapter - C 200.1 Measuring cup 2000 ml - Water emptying hose - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Maximum stirring quantity (H2O): 15 l Speed: 50 – 2000 rpm Setting accuracy speed: ±1 rpm Deviation  (more)of speed measurement (>300rpm): ±1 % Deviation of speed measurement (<300rpm): ±3 rpm Maximum viscosity: 10000 mPas Maximum torque at stirring shaft: 20 Ncm Nominal torque: 0.2 Nm Deviation of torque measurement: ±3 Ncm Torque measurement: trend Time setting range: 0 – 6000 min Connection for external temperature sensor: PT1000 Temperature measuring range: -10°C – 350°C Temperature measurement resolution: 0.1 K Dimensions (WxHxD): 70 x 193 x 154 mm Weight: 1.56 kg Equipped with: R 1342 4-bladed propeller stirrer Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Stirrer Ø: 50 mm Shaft Ø: 8 mm Shaft length: 350 mm IKA tripod scale A stand with an integrated scale and data interface. The IKA scale provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process. Sample weight of up to 6 kg The intelligent tripod scale has a weighing range of up to 6 kg with a resolution of 1 g. It is therefore particularly suitable for the direct and controlled addition of sample material while stirring. Weighing range: 5 – 6000 g Weighing accuracy: ±6 g Plate dimension: 200 x 200 mm Dimensions (WxHxD): 213 x 570 x 391 mm Weight: 5.2 kg

With this washer-disinfector you can treat water-based laboratory glasses and laboratory objects int (more)ended for reuse. Laboratory glassware and laboratory objects suitable for treatment are understood to mean everything from evaporation dishes to centrifuge tubes. The treatment includes cleaning and rinsing, as well as any disinfection and drying. Given the variety of glassware, objects, applications, contaminants and disinfection parameters, it is necessary in specific situations to check whether treatment in the machine is possible. Programs: Special 93°C -10′ Standard Universal Intensive Inorganic Injector Plus Organic Pipettes Plastic Mini Oil program Dimensions (HxWxD): 835 x 600 x 600 mm Weight: 74 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW