Heating block for pointed Flasks 100-300ml

Scilogex Circular Tube Holder for 1.5ml x 60 TubesThe Scilogex Circular Tube Holder accommodates 60  (more)x 1.5ml tubes. For use with the Mx-RD-Pro LCD Digital Tube Rotator. INCLUDED: The Scilogex Circular Tube Holder for 1.5ml x 60 Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap Cold Trap Brushed, Stainless Steel and Powder-Coated Steel Exterior Illuminat (more)ed Temperature Graph with Endpoint Indication (Operating temperature of -40° C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -50C in less than 30 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel Drain Port (with corrosion-resistant, nylon valve) INCLUDED: The Labconco 7811020 CentriVap Cold Trap, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA ROTAVISC SBS hi-vi II CompleteThe SBS (Steel Ball Bearing, Suspended) rotational viscometers ext (more)end a large part of the application spectrum of our IKA ROTAVISC device family. Instead of a jewel bearing, these devices are equipped with a special ball bearing technology. They are characterized by their high robustness. Predestined for applications with very high sample throughput, frequent spindle changes, operation in harsher environments, or even frequently changeing device locations. Whether simple or demanding viscosity measurements - with ROTAVISC you get fast and accurate results. Easy to use Intuitive menu navigation awaits you via the generous 4.3"" TFT display. A digital leveling also supports the correct setting of the starting condition. Recurring tasks are facilitated by the simple ramp function. Highest measurement accuracy The accuracy of the ROTAVISC rotary viscometers for Newtonian and non-Newtonian liquids is +/- 1 % of the measuring range. The reproducibility is +/- 0.2%. Infinitely variable speed With ROTAVISC you have a viscometer in which you can adjust the speed stepless, but also specify programs or individual speed levels. Viscosity-Measuring range: 800 - 320.000.000 mPasINCLUDED: The IKA ROTAVISC SBS hi-vi II Complete includes: - Power Cord - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Yamato DX-602C Natural Convection Oven 153L, 115V Temperature Range Ambient +5°C to 280°C Temperatu (more)re Distribution Accuracy ± 10°C at 280°C Chamber Volume 153L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-602C Natural Convection Oven 153L, 115V is designed for both economy and efficiency. It features a digital PID controller for straightforward operation, including options like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 280°C, maintaining a temperature control accuracy of ±1°C and distribution accuracy of ±10°C at 280°C. It takes approximately 80 minutes to reach its maximum temperature from room temperature. This oven is built with a durable stainless-steel interior and an electro-galvanized steel sheet exterior finished with melamine resin, ensuring longevity and ease of maintenance. It's insulated with glass wool and utilizes a 1.36 kW iron-chrome wire heater. Equipped with two 33 mm exhaust ports on the top, it offers microprocessor controlled PID temperature management with digital setting and LED display options, alongside a versatile timer range. Safety is a priority, with features including self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 600x510x500mm, and the external dimensions are 700x640x830mm. The oven can support a shelf plate load of 15kg and features 12 shelf rest steps with a 35mm pitch. The Yamato DX-602C is an ideal solution for those in need of a large, reliable, and user-friendly convection oven for various applications. INCLUDED: The Yamato DX-602C Natural Convection Oven 153L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

0

The Leica Biocut 2030, previously called the Reichert Jung Biocut 2030 is a unique high performance  (more)microtome that can be used in nearly all fields of histological techniques in biology and industry. Equipped with a microtome feed system developed with the latest technology, the Biocut 2030 is a combination of proven and novel specimen holders with an ergonomic design. The Biocut 2030 Microtome has an absolutely backlash-free, vertical guideway for the specimen cylinder. This Leica microtome is built with exceptionally durable base plate and housing. A truly flexible microtome, the Biocut 2030 also uses a new style universal knife holder system. Featuring high precision and stability, the Leica Biocut 2030 ensures exact and reproducible section quality in wax and plastic embedded sections. This microtome also prioritizes operator comfort through the ergonomic position of the hand wheel. Along with perfect specimen clamping, the system can quickly change specimen holders. Other features of the Leica Biocut 2030 microtome include: coarse feed sideways and forward as required, perfect specimen clamping, easy servicing, and vertical slideway and micrometer feed mechanism.

For use with ISOLATOR 10mL Microbial Tubes.