Grifols ID-Gelstation Immunohaematology System

Vinitex 3 Drawer cabinet low White

Vinitex door sink cabinet low White 600

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39922 Disov3ry Paste Extruder ITEM-39923 Ci Robal SystemITEM-39924 Various CryotanksITEM-39925 Stuens Knuth Rotor ITEM-39927 Pyrex Freeze dryer chamber ITEM-39074 Eppendorf Minispin ITEM-39076 Sprout Centrifuge ITEM-39075 Start see-saw rocker SSL4 ITEM-39073 Capex 2dc ITEM-39930 Russel Hobbs MicrowaveITEM-39966 FisherBrand FB 70155 x 2 ITEM-39962 Nalgene Bottle x 2ITEM-39072 Gilson Pipet StandITEM-41032 2 x Boxes Gilson Pipetman kits ITEM-41042 2 x Boxes VWR Weigh BoatsITEM-41043 Mixed Miscellaneous plasticware ITEM-41044 Box of Thermo Scientific Nunclon PlatesITEM-41045 Applied Biosystems 96 Well Starter KitITEM-41046 4 x Mettler Toledo SensorsITEM-41047 Bio-Rad Bio-Dot ApparatusITEM-41048 Bio-Bin Pipet/Sharps Bins with Z stands ITEM-41049 Box of mixed assorted Plastic Syringes ITEM-41050 Box of mixed brand assorted plastic tubes/vials ITEM-41051 5 x Nalgene 1000ml Plastic BottlesITEM-41052 Pack of 4 Corning 500ml Centrifuge TubesITEM-41053 Corning 2L Erlenmeyer Flask ITEM-41054 Azlon 2000:20ml Plastic Flask ITEM-40939 IKA RCT basic Magnetic stirrer with heatingITEM-40940 Lafert D/351VM/7 Pump ITEM-40941 Lafert D/351VM/7 Pump ITEM-31370 Maps Trainer Telestrator System

Benchmark A2505 EZ Pack Agarose Tablets, Pack of 1000 Tablets (500g)Researchers trust Benchmark’s Ag (more)arose LE to meet their electrophoreticneeds for a variety of applications. Now the same agarose is availablein a convenient, no mess tablet. The low EEO of the agarose promotes increased electrophoretic mobility,yielding improved resolution and shorter run times. This also allowsmacromolecules and larger particles (subcellular fragments, viruses, etc.)to migrate more freely through the gel matrix. The consistently low EEOreduces band distortion (caused by counter flow) that can result fromthe presence of excessive sulfate-rich negative ions. The quick dissolving EZ Pack tablet contains 0.5g (500mg) ofAgarose LE, eliminating the hands-on time and inaccuraciesnormally associated with weighing. Use of the tablet is not onlyconvenient and cleaner, it also provides better consistency andreproducibility gel to gel. Gel preparation is simple – add the desirednumber of tablets to electrophoresis buffer, allow to sit for twominutes and then heat and pour as usual. The resulting gels arehighly transparent, have exceptional thermal stability (ensuring safeand easy handling) and exhibit exceptionally low absorption ofchemical staining agents. INCLUDED: The Benchmark A2505 EZ Pack Agarose Tablets, Pack of 1000 Tablets (500g) includes: - Benchmark A2505 EZ Pack Agarose Tablets, Pack of 1000 Tablets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

BIOMERIEUX V1221 GRAM NEG (-) 145 µl laboratory pipette Fixed volume pipette: 145 µl Not calibrated  (more)Test performed using a 10-4 g (0.1mg) balance: Reading (in g) for 145 µl: 0.147

ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility. Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Tenenergy 10,000 mAh NiMH rechargeable battery1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 10 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).