Freezer F290 B Medical Systems

Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with CoverThe Scilogex Aluminum Alloy Rotor with cover ha (more)s the capacity to accomodate 24 x 1.5/2mL tubes and can a reach maximum speed of 15,000RPM. For use with the D3024 & D3024R centrifuges. INCLUDED: The Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with Cover includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for (more) unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Branson Cup horn, flow-thru 3 in dia. clear plastic chamber The Branson Sonifier 3 in Diameter Cup H (more)orn enables sonification of a sample without the horn coming in contact with the solution. It can simultaneously process a number of sealed vials or test tubes with identical parameters.For use with Branson SFX250 and SFX550 Sonifiers, and discontinued models S250D, S450D, S250A, and S450A SonifiersINCLUDED: The Branson Cup horn, flow-thru – 3 in dia. clear plastic chamber includes: - Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Pfeiffer Vacuum Diaphragm Pump MVP 015-2 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and runs but has not been tested further. It is in good cosmetic condition with minor marks.

Yamato RE-202-A Rotary Evaporator with Oil Bath and Selectable Glassware, 115V Speed Range 5 to 315 (more) RPM Evaporation Capacity Up to 23 ml/min Rotation Modes Forward/Reverse/Auto Inversion Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with a slide jack mechanism for convenient height adjustment. Set includes the BO302-A Oil Bath and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator with Oil Bath and Selectable Glassware, 115V includes: - Glassware Set Selected Above - BO302-A Oil Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

PT0455 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a RADWAG RTP print (more)er. Its standard length is 1,8m.

Labconco FilterMate Portable Exhauster, 2 Carbon Filters required (not included) Compact, corros (more)ion-resistant housing of glacier white and light gray, dry powder, epoxy-coated steel with rubber feet Uses HEPA filter, carbon-based filter or combination of both filters Variable speed, non-sparking motorized impeller, adjustable to optimize airflows Negative pressure plenum surrounds positive pressure impeller to capture and refilter unfiltered air Front-mounted rocker switch controls power to blower Rear-mounted auxiliary electrical outlet for connection to airflow monitor Suitable for 2 ft., 3 ft. and 4 ft. wide x 22.75 in. high enclosures Comes with IEC 3-wire electrical cord with plug Models for use with HEPA filter Include true bag-in bag-out filter disposal system for safely removing and replacing filter without detaching hose Filter efficiency: 250 CFM INCLUDED: The Labconco 3970004 FilterMate Portable Exhauster, 2 Carbon Filters required (not included), 115V, 60Hz includes: - 8 Feet of 5" ID Gray Hosing - Two Clamps - 5" OD Upper Transition Adapter - Xpert Balance Enclosure - Protector XVS Ventilation Station - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware Features - Clear digital d (more)isplay showing actual and set values - Two separete knobs with dynamic control for setting the rotation speed and heating bath - Accidental changing of the values can be prevented by the lock function - Intuitive LED ring light system makes activated functions clearly visible even from a distance - Easy adjustment of the immersion depth up to 160 mm and the inclination angle from 20° to 80° - Standby function and residual heat warning at heating bath temperatures above 50°C - Available as hand or motor lift models - The standby button stops all functions and, when using a motor lift model, lifts the evaporation flask from the heating bath Temperature of the water bath can be easily controlled by utilizing the right knob on the interface controller. Heating bath temperature can be set from 20 to 210 degrees Celsius. (oil) Heating bath can be easily removed from the system base and contents can be disposed of with ease. Rotation speed of the evaporation flaskcan be easily controlled by utilizing the left knob on the interface controller. Rotational speed can be set from 10 to 280 rotations per minute. .features-side.third img{height:unset;} The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty