Edwards E2M8 Rotary Vane Vacuum Pump Drehschieber Vakuum Pumpe

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a Amar Packaging Heat Shrink Chamber

FURTHER DETAILS TO FOLLOW

Manufacturer: Agilent Model: 35900E Series II Dual Channel Interface S/N: CN00002057 Description: Th (more)e Agilent 35900E Series II Dual Channel Interface (35900E Series II) is a dual-channel, run-buffered interface that connects analytical instruments to Agilent data systems. It converts the analog signal from analytical instruments to digital data and transmits it to the host computer for further processing. The 35900E Series II is intended for use with both Agilent and non-Agilent manufactured laboratory instruments with a two-dimensional analog output. Dual Channel or Single Channel Functionality: In dual channel operation, the Agilent 35900E provides two channels of data acquisition to a single device. In this mode, the Agilent 35900E is configured as part of a single instrument. It is capable of communicating with other devices with Start, Stop, and Ready outputs. A dual-channel configuration has a common start/stop button set, a common APG Remote bus, and two sets of digital I/O ports.In single channel mode, the Agilent 35900E operates as two independent single channel interfaces, each channel normally assigned to a different instrument. In single Channel configuration each channel has independent start/stop buttons, an APG Remote bus , 8 TTL I/O pin states, and an A/D converter for a single analog signal. Features: - Data buffering- Two independent analog-to-digital (A/D) converters, or dual channel synchronous- Real-time control- Instrument control ports- Host communication- Front panel indicators that show run status, interface activity, etc. Specifications: - Analog Dynamic Range: >140 dB (<2Hz) typical- Input Signal Range: 18 mV to +1.0 Volt- Input Noise: 40 nV RMS typical (Max. 150 nV RMS) 15 Hz Bandwidth- Resolution: 24 Bit- Common-mode Rejection: 140 dB min., dc to 100Hz- Data Acquisition Rate: 0.1 to 100 Hz- Monotonicity: 24 Bits, 0.004% FS typical- Power: 115/230 VAC 50-60 Hz 135 Watts- Dimensions (H x D x W): 104 x 285 x 325 mm Items delivered: - Agilent 35900E Series II Dual Channel Interface- Instruction Manual as PDF via E-Mail request Condition: The item is in used but very good cosmetic as well as technical condition. It is 100% functional tested and ready to be applied.

Manufacturer: Varian Model: DS 102 Two-stage Rotary Vane Pump + Oil Mist Eliminator KF 25 949-9395 s (more)erie S/N: 219579 Description: Thanks to a very simple and highly reliable design, this field proven DS Series rotary vane pump provides excellent vacuum performance. The quality and manufacturing standards ensure that the DS rotary vane pumps provide high pumping stability for light gases, low noise, minimal oil backstreaming, and a long operating life. The pump’s two-stage design allows for low operating temperature, minimal backstreaming at low pressure and good pumping efficiency and gas ballast. It delivers a pumping speed of max. 114 liters per minute, low noise and a long operating life. It conforms to European Union directives (CE) and Restriction of Hazardous Substances (RoHS) requirements, and it is also UL and Canadian Standards Authority (CSA) approved. Oil Mist Eliminator KF 25 949-9395 serie is assembled at the outlet of the rotary pump and the main purpose is to purify the exhaust gases from oil mists. The use is advised for pumps which have to work for a long time at intake pressures exceeding 10 mbar, or with the ballasting tap open. Applications: - Analytical Instruments:Dual Stage Rotary Vane Pumps are practically the only primary vacuum pumps used on GC-MS and MALDI-TOF Instruments:GC-MS typically uses this small pump - the pump is needed to rough the system and back the high vacuum Turbo or Diffusion pump. MALDI-TOF depending on system size, uses the DS102 as roughing or interface pump.- Leak Detection:DS102 is typically used to back the Helium Mass Spectrometer Turbo or Diffusion pump.- Industrial Vacuum Processes:Vacuum coatings, Metallurgy Vacuum Furnaces, Lamps and TV Tube manufacture, Sterilizers, Freeze Dryers, Glove Boxes, High Speed Centrifuges, and Flywheels (for energy storage) represent the main Industrial applications for Dual Stage Rotary Vane pump. - High Energy Physics and Research Laboratories:In these applications the Rotary Vane pumps are mainly used in combination with Turbo pumps. The combination is typically used to rough and pump High Vacuum experimental chambers or to start Ion Pumps in ultra high vacuum systems.Features: - Dual Stage Pump:The two stage design allows low 10-3 mbar operation, low operating temperature, minimal backstreaming at low pressure, good pumping efficiency and gas ballast in the high 10-3 mbar region.- Forced Oil Circulation:The dedicated oil circulation gear pump ensures efficient and reliable lubrication of the pump from atmospheric pressure throughout the entire vacuum operating range.- Built-in Oil Shield:This feature minimizes the oil mist at the pump exhaust. Apart from drastically reducing the oil consumption over long periods of operation, this results in a reduction of air pollution limiting the impact on the environment. Specifications: Free air displacement:- 60 Hz: 114 l/min (4 cfm)- 50 Hz: 95 l/min (5.7 m3/h)Pumping speed:- 60 Hz: 3.5 cfm- 50 Hz: 5 m3/hUltimate partial pressure: 10-4 mbarUltimate total pressure: 2 x 10-3 mbarUltimate total pressure with gas ballast: 2 x 10-2 mbarWater vapor tolerance: 15 mbarWater vapor capacity: 60 g/hOil capacity min/max: 0.2/0.5 lMotor rating 1ph:- 60 Hz: 0.55 kW- 50 Hz: 0.45 kWNominal rotation speed:- 60 Hz: 1800 rpm- 50 Hz: 1500 rpmInlet flange: 25KF DNExhaust flange: 25KF DNOil Mist Eliminator's pneurop fitting: KF 25Oil Mist Eliminator's material: Nylon 30VF Items delivered: - Varian DS 102 Two-stage Rotary Vane Pump + Oil Mist Eliminator KF 25 949-9395 serie Condition: The whole item is in used but good condition. It is 100% functional tested and ready to be operated.