Counting Scale Ranger Count 4000 Ohaus

DMA 4100 M delivers the 4-digit density values you need and is not affected by your working environm (more)ent and workforce. It applies the patented Pulsed Excitation Method to deliver the most stable density results based on comprehensive knowledge of the oscillation characteristics. This method results in viscosity correction which is twice as effective as anything else available on the market. The integrated camera allows you to check the filling procedures of your operators at any time and also at the end of the working day. The patented condition monitoring ensures that frequently changing users with differing filling approaches, humidity, temperature fluctuations, air pressure, and instrument condition all have no effect on the operation and results – built-in intelligence for your convenience. Measuring range: Density; 0 g/cm³ to 3 g/cm³, Temperature; 0 °C to 100 °C, Pressure; Up to 10 bar Repeatability: Density; 0.00001 g/cm³, Temperature; 0.02 °C Reproducibility: Density; 0.00005 g/cm³ Accuracy: Density: 0.0001 g/cm³, Temperature; 0.03 °C Digital Resolution: 0.0001 g/cm³ Integrated tables and functions: Alcohol tables, Extract/sugar tables, API functions, Acid/base tables, 150 freely programmable tables/user functions (tables, polynomials, formulas, linear functions, and constants) Minimum sample amount: approx. 1 mL Measuring time per sample: 30 seconds Data memory: 1000 measurement results Interfaces: 4 x USB, RS-232, CAN, VGA, Ethernet Wetted parts: PTFE, borosilicate glass Industries: Beverages, Chemical Industry, Cosmetics, Personal Care, Electronics, Environmental, Food Industry, Petroleum Industry, Pharmacy, Medicine, Biotechnology Dimensions (LxWxH): 495 x 330 x 230 mm Weight: 22.5 kg

Wild Heerbrugg Tachymat TC1000 Digital Theodolite This item was removed from a university where it w (more)as surplus to requirement. It is in very good cosmetic condition and includes the original carry case shown in the image. We are unable to test the item at our facility.

Thermo Scientific Multiskan FC microplate reader. The wavelength range is 340 to 850 nm, which allow (more)s a variety of applications from enzymatic kinetic studies to Lowry assays. Accuracy ± 1% for 0.3–3 Abs at 405 nm, ± 2% for 3–4 Abs at 405 nm. Eight-position filter turret with three standard filters (405, 450 and 620 nm) pre-installed. Slow, medium or fast linear agitation. Fast processing reading in 6 seconds. Automatic calibration and self-diagnosis. Quick access to the most used protocols. The internal software contains qualitative and quantitative calculations for simple, dual and kinetic measurements. USB interface User manual. Specifications

F1 Mass Standard - rectangular weights. Nominal value - 10 kg.

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }