CETAC U5000AT+ Ultrasonic Nebulizer

Dimensions (WxHxD): 600 x 650 x 500 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Density ρ: 7950 (± 140) kg/m3 Box: Plastic box (included) Material: Stainless Steel Content (set up) (more): 200 g F2 / 20 g F1 OIML Class: F2 Nominal Value: 200g/20g

The Vi-CELL Cell Viability Analyzer provides an automatic means to perform the Trypan Blue Dye Exclu (more)sion method, allowing users to load up to 9 samples at once for easy and automated cell analysis. Vi-CELL software offers pre-programmed and customizable analysis options for consistent and accurate analysis of simple cell systems or your own cell line.

Eppendorf FA-45-6-30 Fixed Angle Rotor, Cat. #: 5820715006 The Eppendorf FA-45-6-30 Fixed Angle Roto (more)r, Cat. #: 5820715006 accommodates6 x 50 mL samples. This rotor can reach speeds up to 12,100 RPM with a maximum RCF of 20,133 x g. The Eppendorf FA-45-6-30 Fixed Angle Rotor is for use with the Eppendorf 5804/R and 5810/R series centrifuges.. INCLUDED: The Eppendorf FA-45-6-30 Fixed Angle Rotor, Cat. #: 5820715006 includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-6-30 Fixed Angle Rotor, Cat. #: 5820715006 SpecificationsMaximum Speed12,100 RPMMaximum RCF20,133 x gMaximum Capacity6 x 50mlMaximum Radius12.3 cmCentrifuge CompatibilityEppendorf 5804/R and 5810/R Series CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60HzFeatures - Timed dispense for (more) unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000621 WaterPro PS/HPLC Pistol Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Double-headed, chemically resistant, dry-running diaphragm pumps for a wide range of laboratory appl (more)ications. For conveying and evacuating, without affecting the media. • 100% oil-free transfer, so that the media cannot be contaminated during pumping, evacuating or compressing • Very suitable for vapours and condensates • Suitable for slightly aggressive and corrosive gases and vapours • Maintenance-free, environmentally friendly • Flow rate: 34 L/min (at atmospheric pressure) • Working pressure: 1.0 bar • Final pressure (abs): 8 mbar Dimensions (DxHxW): 341 x 226 x 166 mm Weight: 12 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

An economic laboratory oven but complete with the necessary adjustments and safety devices. Fine tem (more)perature regulation, clear and complete display, top safety class, front regulation of the rear air inlet. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel STANDARD:     PID thermoregulator with adjustable temperature up to 300°C     2 shelves     Rear 45 mm outlet with front device for adjusting opening/closing gap.     Safety class DIN 3.1 Microprocessor controlled Safety class DIN 3.1 (top DIN class) Laboratory Oven STE-N 52 FALC

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes filters other vessels